c276df7759 zmq: enable tcp keepalive (mruddy)
Pull request description:
This addresses https://github.com/bitcoin/bitcoin/issues/12754.
These changes enable node operators to address the silent dropping (by network middle boxes) of long-lived low-activity ZMQ TCP connections via further operating system level TCP keepalive configuration. For example, ZMQ sockets that publish block hashes can be affected in this way due to the length of time it sometimes takes between finding blocks (e.g.- sometimes more than an hour).
Prior to this patch, operating system level TCP keepalive configurations would not take effect since the SO_KEEPALIVE option was not enabled on the underlying socket.
There are additional ZMQ socket options related to TCP keepalive that can be set. However, I decided not to implement those options in this changeset because doing so would require adding additional bitcoin node configuration options, and would not yield a better outcome. I preferred a small, easily reviewable patch that doesn't add a bunch of new config options, with the tradeoff that the fine tuning would have to be done via well-documented operating system specific configurations.
I tested this patch by running a node with:
`./src/qt/bitcoin-qt -regtest -txindex -datadir=/tmp/node -zmqpubhashblock=tcp://127.0.0.1:28332 &`
and connecting to it with:
`python3 ./contrib/zmq/zmq_sub.py`
Without these changes, `ss -panto | grep 28332 | grep ESTAB | grep bitcoin` will report no keepalive timer information. With these changes, the output from the prior command will show keepalive timer information consistent with the configuration at the time of connection establishment, e.g.-: `timer:(keepalive,119min,0)`.
I also tested with a non-TCP transport and did not witness any adverse effects:
`./src/qt/bitcoin-qt -regtest -txindex -datadir=/tmp/node -zmqpubhashblock=ipc:///tmp/bitcoin.block &`
ACKs for top commit:
adamjonas:
Just to summarize for those looking to review - as of c276df7759 there are 3 tACKs (n-thumann, Haaroon, and dlogemann), 1 "looks good to me" (laanwj) with no NACKs or any show-stopping concerns raised.
jonasschnelli:
utACK c276df7759
Tree-SHA512: b884c2c9814e97e666546a7188c48f9de9541499a11a934bd48dd16169a900c900fa519feb3b1cb7e9915fc7539aac2829c7806b5937b4e1409b4805f3ef6cd1
e57980b473 [mempool] Remove NotifyEntryAdded and NotifyEntryRemoved callbacks (John Newbery)
2dd561f361 [validation] Remove pool member from ConnectTrace (John Newbery)
969b65f3f5 [validation] Remove NotifyEntryRemoved callback from ConnectTrace (John Newbery)
5613f9842b [validation] Remove conflictedTxs from PerBlockConnectTrace (John Newbery)
cdb893443c [validation interface] Remove vtxConflicted from BlockConnected (John Newbery)
1168394d75 [wallet] Notify conflicted transactions in TransactionRemovedFromMempool (John Newbery)
Pull request description:
These boost signals were added in #9371, before we had a `TransactionRemovedFromMempool` method in the validation interface. The `NotifyEntryAdded` callback was used by validation to build a vector of conflicted transactions when connecting a block, which the wallet was notified of in the `BlockConnected` CValidationInterface callback.
Now that we have a `TransactionRemovedFromMempool` callback, we can fire that signal directly from the mempool for conflicted transactions.
Note that #9371 was implemented to ensure `-walletnotify` events were fired for these conflicted transaction. We inadvertently stopped sending these notifications in #16624 (Sep 2019 commit 7e89994). We should probably fix that, but in a different PR.
ACKs for top commit:
jonatack:
Re-ACK e57980b
ryanofsky:
Code review ACK e57980b473, no code changes since previous review, but helpful new code comments have been added and the PR description is now more clear about where the old code came from
Tree-SHA512: 3bdbaf1ef2731e788462d4756e69c42a1efdcf168691ce1bbfdaa4b7b55ac3c5b1fd4ab7b90bcdec653703600501b4224d252cfc086aef28f9ce0da3b0563a69
3e730bf90a zmq: Fix due to invalid argument and multiple notifiers (João Barbosa)
Pull request description:
ZMQ initialization is interrupted if any notifier fails, and in that case all notifiers are destroyed. The notifier shutdown assumes that the initialization had occurred. This is not valid when there are multiple notifiers and any except the last fails to initialize.
Can be tested by running test/functional/interface_zmq.py from this branch with bitcoind from master.
Closes #17185.
ACKs for top commit:
laanwj:
Code review ACK 3e730bf90a, thanks for adding a test
Tree-SHA512: 5da710e97dcbaa94896d019e75162d470f6d381ee07c60e5b3e9db93d11e8f7ca9bf2c509efa4486199e88c96c3e720cc96b4e35b62725d4c7db8e8e9bf6e09d
To do so we update CValidationInterface::BlockDisconnect to take a
CBlockIndex pointing to the block being disconnected.
This new parameter will be use in the following commit to establish
wallet height.
Just a preparatory commit to add the header to the includes and run
clang-format to sort the include lists.
Splitting this up into a separate commit makes future scripted-diffs
easier.
a4edb168b6 ZMQ: add options to configure outbound message high water mark, aka SNDHWM (mruddy)
Pull request description:
ZMQ: add options to configure outbound message high water mark, aka SNDHWM
This is my attempt at https://github.com/bitcoin/bitcoin/pull/13315
Tree-SHA512: a4cc3bcf179776899261a97c8c4f31f35d1d8950fd71a09a79c5c064879b38e600b26824c89c4091d941502ed5b0255390882f7d44baf9e6dc49d685a86e8edb
This adds a new RPC method "getzmqnotifications", which returns
information about all active ZMQ notification endpoints. This is useful
for software that layers on top of bitcoind, so it can verify that
ZeroMQ is enabled and also figure out where it should listen.
See https://github.com/bitcoin/bitcoin/issues/13526.
This moves the used instance of CZMQNotificationInterface from a static
variable in init.cpp to a globally-accessible one declared in
zmq/zmqnotificationinterface.h. The variable is also renamed to
g_zmq_notification_interface, to be consistent with other globals.
We need this to implement a new RPC method "getzmqnotifications" (see
https://github.com/bitcoin/bitcoin/issues/13526) in a follow up.
680bc2cbb Use range-based for loops (C++11) when looping over map elements (practicalswift)
Pull request description:
Before this commit:
```c++
for (std::map<T1, T2>::iterator x = y.begin(); x != y.end(); ++x) {
T1 z = (*x).first;
…
}
```
After this commit:
```c++
for (auto& x : y) {
T1 z = x.first;
…
}
```
Tree-SHA512: 954b136b7f5e6df09f39248a6b530fd9baa9ab59d7c2c7eb369fd4afbb591b7a52c92ee25f87f1745f47b41d6828b7abfd395b43daf84a55b4e6a3d45015e3a0
40a0f9f Enable devirtualization opportunities by using the final specifier (C++11) (practicalswift)
9a1675e optim: mark a few classes final (Cory Fields)
Pull request description:
Using gcc's ```-Wsuggest-final-types``` and lto, I identified a few easy devirtualization wins:
> wallet/wallet.h:651:7: warning: Declaring type 'struct CWallet' final would enable devirtualization of 26 calls [-Wsuggest-final-types]
>coins.h:201:7: warning: Declaring type 'struct CCoinsViewCache' final would enable devirtualization of 13 calls [-Wsuggest-final-types]
>txdb.h:67:7: warning: Declaring type 'struct CCoinsViewDB' final would enable devirtualization of 5 calls [-Wsuggest-final-types]
>zmq/zmqnotificationinterface.h:16:7: warning: Declaring type 'struct CZMQNotificationInterface' final would enable devirtualization of 4 calls [-Wsuggest-final-types]
>httpserver.cpp:42:7: warning: Declaring type 'struct HTTPWorkItem' final would enable devirtualization of 2 calls [-Wsuggest-final-types]
Tree-SHA512: 2a825fd27121ccabaacff5cde2fc8a50d1b4cc846374606caa2a71b0cd8fcb0d3c9b5b3fd342d944998610e2168048601278f8a3709cc515191a0bb2d98ba782
This simplifies fixing the wallet-returns-stale-info issue as we
can now hold cs_wallet across an entire block instead of only
per-tx (though we only actually do so in the next commit).
This change also removes the NOT_IN_BLOCK constant in favor of only
passing the CBlockIndex* parameter to SyncTransactions when a new
block is being connected, instead of also when a block is being
disconnected.
This change adds a parameter to BlockConnectedDisconnected which
lists the transactions which were removed from mempool due to
confliction as a result of this operation. While its somewhat of a
shame to make block-validation-logic generate a list of mempool
changes to be included in its generated callbacks, fixing this isnt
too hard.
Further in this change-set, CValidationInterface starts listening
to mempool directly, placing it in the middle and giving it a bit
of logic to know how to route notifications from block-validation,
mempool, etc (though not listening for conflicted-removals yet).
This changes the logging categories to boolean flags instead of strings.
This simplifies the acceptance testing by avoiding accessing a scoped
static thread local pointer to a thread local set of strings. It
eliminates the only use of boost::thread_specific_ptr outside of
lockorder debugging.
This change allows log entries to be directed to multiple categories
and makes it easy to change the logging flags at runtime (e.g. via
an RPC, though that isn't done by this commit.)
It also eliminates the fDebug global.
Configuration of unknown logging categories now produces a warning.
In anticipation of making all the callbacks out of block processing
flow through it. Note that vHashes will always have something in it
since pindexFork != pindexNewTip.
