fb02a3cd1a p2p: Log addresses of stalling peers (Martin Zumsande)
Pull request description:
This was suggested in #27705 by ArmchairCryptologist.
It allows node operators that have the `-logips` option enabled to better identify potentially misbehaving peers and maybe ban them.
This is especially helpful in case of inbound peers for which (dis)connections aren't logged per default, so it's impossible to use the debug log to connect their `nodeId` to an address unless the very noisy `net` debugging is enabled.
In case of outbound peers for which the address is potentially logged when establishing the connection, this just adds some convenience.
ACKs for top commit:
stratospher:
tACK fb02a3c.
jamesob:
github ACK fb02a3cd1a
0xB10C:
Untested ACK fb02a3cd1a
instagibbs:
utACK fb02a3cd1a
Tree-SHA512: 2080f794c715bd36143405828b4b0e1be859095caf8f8a0c20dd2a4b64d192d78fee0fa350a2bb7c39848718332c4dd4d8edb2cc8d22095b65afe710591f7ccb
A single outbound slot is required, so if the first two slots
are taken by inbound in-flights, the node will reject additional
unless they are coming from outbound.
This means in the case where a fast sybil peer is attempting to
stall out a node, a single high bandwidth outbound peer can
mitigate the attack.
This is a change in behavior so that if for some reason we request a block from a peer, we don't allow an unsolicited CMPCT_BLOCK announcement for that same block to cause a request for a full block from the uninvited peer (as some type of request is already outstanding from the original peer)
5b3406094f net_processing: Boost inv trickle rate (Anthony Towns)
228e9201ef txmempool: have CompareDepthAndScore sort missing txs first (Anthony Towns)
Pull request description:
Couple of performance improvements when draining the inventory-to-send queue:
* drop txs that have already been evicted from the mempool (or included in a block) immediately, rather than at the end of processing
* marginally increase outgoing trickle rate during spikes in tx volume
ACKs for top commit:
willcl-ark:
ACK 5b34060
instagibbs:
ACK 5b3406094f
darosior:
utACK 5b3406094f
glozow:
code review ACK 5b3406094f
dergoegge:
utACK 5b3406094f
Tree-SHA512: 155cd3b5d150ba3417c1cd126f2be734497742e85358a19c9d365f4f97c555ff9e846405bbeada13c3575b3713c3a7eb2f780879a828cbbf032ad9a6e5416b30
This is a commit in preparation for the next few commits. The functions
are moved to methods to avoid their re-declaration for the purpose of
passing in BlockManager options.
The functions that were now moved into the BlockManager should no longer
use the params as an argument, but instead use the member variable.
In the moved ReadBlockFromDisk and UndoReadFromDisk, change
the function signature to accept a reference to a CBlockIndex instead of
a raw pointer. The pointer is expected to be non-null, so reflect that
in the type.
To allow for the move of functions to BlockManager methods all call
sites require an instantiated BlockManager, or a callback to one.
If transactions are being added to the mempool at a rate faster than 7tx/s
(INVENTORY_BROADCAST_PER_SECOND) then peers' inventory_to_send queue can
become relatively large. If this happens, increase the number of txids
we include in an INV message (normally capped at 35) by 5 for each 1000
txids in the queue.
This will tend to clear a temporary excess out reasonably quickly; an
excess of 4000 invs to send will be cleared down to 1000 in about 30
minutes, while an excess of 20000 invs would be cleared down to 1000 in
about 60 minutes.
Under which circumstances we process received 'mempool' P2P messages
caused confusion in #27426. Rather than bikeshedding the formulation
of the IF-statement, this adds a comment clarifing when we process
the message. Also, correcting the comment of `m_send_mempool`.
Co-authored-by: willcl-ark <will8clark@gmail.com>
be55f545d5 move-only: Extract common/args and common/config.cpp from util/system (TheCharlatan)
Pull request description:
This pull request is part of the `libbitcoinkernel` project https://github.com/bitcoin/bitcoin/issues/24303https://github.com/bitcoin/bitcoin/projects/18 and more specifically its "Step 2: Decouple most non-consensus code from libbitcoinkernel". It is part of a series of patches splitting up the `util/system` files. Its preceding pull request is https://github.com/bitcoin/bitcoin/pull/27254.
The pull request contains an extraction of ArgsManager related functions from util/system into their own common/ file.
The background of this commit is an ongoing effort to decouple the libbitcoinkernel library from the ArgsManager. The ArgsManager belongs into the common library, since the kernel library should not depend on it. See [doc/design/libraries.md](https://github.com/bitcoin/bitcoin/blob/master/doc/design/libraries.md) for more information on this rationale.
ACKs for top commit:
MarcoFalke:
re-ACK be55f545d5🚲
ryanofsky:
Code review ACK be55f545d5. Just small cleanups since the last review.
hebasto:
ACK be55f545d5, I have reviewed the code and it looks OK, I agree it can be merged.
Tree-SHA512: 90eb03334af0155b823030b4f2ecf286d35058d700ee2ddbbaa445be19e31eb0fe982656f35bd14ecee3ad2c3d0db3746855cb8f3777eff7253713e42873e111
0076bed45e logging: log ASN when using `-asmap` (brunoerg)
9836c76ae0 net: add `GetMappedAS` in `CConnman` (brunoerg)
Pull request description:
When using `-asmap`, you can check the ASN assigned to the peers only with the RPC command `getpeerinfo` (check `mapped_as` field), however, it's not possible to check it in logs (e.g. see in logs the ASN of the peers when a new outbound peer has been connected). This PR includes the peers' ASN in debug output when using `-asmap`.
Obs: Open this primarily to chase some Concept ACK, I've been using this on my node to facilitate to track the peers' ASN especially when reading the logs.
ACKs for top commit:
Sjors:
tACK 0076bed45e
jamesob:
ACK 0076bed45e ([`jamesob/ackr/27412.1.brunoerg.logging_net_add_asn_from`](https://github.com/jamesob/bitcoin/tree/ackr/27412.1.brunoerg.logging_net_add_asn_from))
achow101:
ACK 0076bed45e
Tree-SHA512: c19cd11e8ab49962021f390459aadf6d33d221ae9a2c3df331a25d6865a8df470e2c8828f6e5219b8a887d6ab5b3450d34be9e26c00cca4d223b4ca64d51111b
This is an extraction of ArgsManager related functions from util/system
into their own common file.
Config file related functions are moved to common/config.cpp.
The background of this commit is an ongoing effort to decouple the
libbitcoinkernel library from the ArgsManager. The ArgsManager belongs
into the common library, since the kernel library should not depend on
it. See doc/design/libraries.md for more information on this rationale.
55c4795c57 [net processing] Use TxRelay::m_relay_txs over CNode::m_relays_txs (dergoegge)
Pull request description:
`CNode::m_relays_txs` is meant to only be used for the eviction logic in `net`. `TxRelay::m_relay_txs` will hold the same value and is meant to be used on the application layer to determine if we will/should relay transactions to a peer.
(Shameless plug: we should really better specify the interface for updating eviction data to avoid refactors like this in the future -> #25572)
ACKs for top commit:
MarcoFalke:
lgtm ACK 55c4795c57
Tree-SHA512: 59cfd23e32568fd96cda5570790e518242a6c76d4edf5b7d1a2a7f9724d590d2a38395504e05be0af4e98dd5c0056fc0be6568eab2818934692483a186e5181d
Taking cs_main is no longer necessary since we moved
`m_recently_announced_invs` to `Peer` and `mapRelay` is actually only
accessed from the message processing thread.
3566aa7d49 [net] Remove CNode friends (dergoegge)
3eac5e7cd1 [net] Add CNode helper for send byte accounting (dergoegge)
60441a3432 scripted-diff: [net] Rename CNode process queue members (dergoegge)
6693c499f7 [net] Make cs_vProcessMsg a non-recursive mutex (dergoegge)
23d9352654 [net] Make CNode msg process queue members private (dergoegge)
897e342d6e [net] Encapsulate CNode message polling (dergoegge)
cc5cdf8776 [net] Deduplicate marking received message for processing (dergoegge)
ad44aa5c64 [net] Add connection type getter to CNode (dergoegge)
Pull request description:
We should define clear interfaces between CNode, CConnman and PeerManager. This PR makes a small step in that direction by ending the friendship of CNode, CConnman and ConnmanTestMsg. CNode's message processing queue is made private in the process and its mutex is turned into a non-recursive mutex.
ACKs for top commit:
jnewbery:
utACK 3566aa7d49
vasild:
ACK 3566aa7d49
theStack:
re-ACK 3566aa7d49
brunoerg:
re-ACK 3566aa7d49
Tree-SHA512: 26b87da5054e32401b693b2904e9c5f40e35a53937c0b6cf44b8597034ad07bacf27d87cdffc54d3e7ccfebde4231ef30a38d326f88cc18133bbb34688ead567
c9d548c91f net: remove CService::ToStringPort() (Vasil Dimov)
fd4f0f41e9 gui: simplify OptionsDialog::updateDefaultProxyNets() (Vasil Dimov)
96c791dd20 net: remove CService::ToString() use ToStringAddrPort() instead (Vasil Dimov)
944a9de08a net: remove CNetAddr::ToString() and use ToStringAddr() instead (Vasil Dimov)
043b9de59a scripted-diff: rename ToStringIP[Port]() to ToStringAddr[Port]() (Vasil Dimov)
Pull request description:
Before this PR we had the somewhat confusing combination of methods:
`CNetAddr::ToStringIP()`
`CNetAddr::ToString()` (duplicate of the above)
`CService::ToStringIPPort()`
`CService::ToString()` (duplicate of the above, overrides a non-virtual method from `CNetAddr`)
`CService::ToStringPort()`
Avoid [overriding non-virtual methods](https://github.com/bitcoin/bitcoin/pull/25349/#issuecomment-1185226396).
"IP" stands for "Internet Protocol" and while sometimes "IP addresses" are called just "IPs", it is incorrect to call Tor or I2P addresses "IPs". Thus use "Addr" instead of "IP".
Change the above to:
`CNetAddr::ToStringAddr()`
`CService::ToStringAddrPort()`
The changes touch a lot of files, but are mostly mechanical.
ACKs for top commit:
sipa:
utACK c9d548c91f
achow101:
ACK c9d548c91f
jonatack:
re-ACK c9d548c91f only change since my previous reviews is rebase, but as a sanity check rebased to current master and at each commit quickly re-reviewed and re-verified clean build and green unit tests
LarryRuane:
ACK c9d548c91f
Tree-SHA512: 633fb044bdecf9f551b5e3314c385bf10e2b78e8027dc51ec324b66b018da35e5b01f3fbe6295bbc455ea1bcd1a3629de1918d28de510693afaf6a52693f2157
faf7b4f1fc Add BlockManager::IsPruneMode() (MarcoFalke)
fae71fe27e Add BlockManager::GetPruneTarget() (MarcoFalke)
fa0f0436d8 Add BlockManager::LoadingBlocks() (MarcoFalke)
Pull request description:
Requested in https://github.com/bitcoin/bitcoin/pull/25781#discussion_r1061323795, but adding getters seems unrelated from removing globals, so I split it out for now.
ACKs for top commit:
dergoegge:
Code review ACK faf7b4f1fc
brunoerg:
crACK faf7b4f1fc
Tree-SHA512: 204d0e9a0e8b78175482f89b4ce620fba0e65d8e49ad845d187af44d3843f4c733a01bac1ffe5a5319f524d8346123693a456778b69d6c75268c447eb8839642
39b93649c4 test: add functional test for IBD stalling logic (Martin Zumsande)
0565951f34 p2p: Make block stalling timeout adaptive (Martin Zumsande)
Pull request description:
During IBD, there is the following stalling mechanism if we can't proceed with assigning blocks from a 1024 lookahead window because all of these blocks are either already downloaded or in-flight: We'll mark the peer from which we expect the current block that would allow us to advance our tip (and thereby move the 1024 window ahead) as a possible staller. We then give this peer 2 more seconds to deliver a block (`BLOCK_STALLING_TIMEOUT`) and if it doesn't, disconnect it and assign the critical block we need to another peer.
Now the problem is that this second peer is immediately marked as a potential staller using the same mechanism and given 2 seconds as well - if our own connection is so slow that it simply takes us more than 2 seconds to download this block, that peer will also be disconnected (and so on...), leading to repeated disconnections and no progress in IBD. This has been described in #9213, and I have observed this when doing IBD on slower connections or with Tor - sometimes there would be several minutes without progress, where all we did was disconnect peers and find new ones.
The `2s` stalling timeout was introduced in #4468, when blocks weren't full and before Segwit increased the maximum possible physical size of blocks - so I think it made a lot of sense back then.
But it would be good to revisit this timeout now.
This PR makes the timout adaptive (idea by sipa):
If we disconnect a peer for stalling, we now double the timeout for the next peer (up to a maximum of 64s). If we connect a block, we half it again up to the old value of 2 seconds. That way, peers that are comparatively slower will still get disconnected, but long phases of disconnecting all peers shouldn't happen anymore.
Fixes #9213
ACKs for top commit:
achow101:
ACK 39b93649c4
RandyMcMillan:
Strong Concept ACK 39b93649c4
vasild:
ACK 39b93649c4
naumenkogs:
ACK 39b93649c4
Tree-SHA512: 85bc57093b2fb1d28d7409ed8df5a91543909405907bc129de7c6285d0810dd79bc05219e4d5aefcb55c85512b0ad5bed43a4114a17e46c35b9a3f9a983d5754
fa035fe2d6 Remove unused CDataStream::SetType (MarcoFalke)
fa29e73cda Use DataStream where possible (MarcoFalke)
fa9becfe1c streams: Add DataStream without ser-type and ser-version (MarcoFalke)
Pull request description:
This was done in the context of https://github.com/bitcoin/bitcoin/pull/25284 , but I think it also makes sense standalone.
The basic idea is that serialization type should not be initialized when it is not needed. Same for the serialization version.
So do this here for `DataStream`. `CDataStream` remains in places where it is not yet possible.
ACKs for top commit:
stickies-v:
re-ACK [fa035fe](fa035fe2d6)
aureleoules:
diff re-ACK fa035fe2d6fa0e6640ba..fa035fe2d6
Tree-SHA512: cb5e53d0df7c94319ffadc6ea1d887fc38516decaf43f0673396d79cc62d450a1a61173654a91b8c2b52d2cecea53fe4a500b8f6466596f35731471163fb051c
c58c249a5b net_processing: indicate more work to do when orphans are ready to reconsider (Anthony Towns)
ecb0a3e425 net_processing: Don't process tx after processing orphans (Anthony Towns)
c583775706 net_processing: only process orphans before messages (Anthony Towns)
be2304676b txorphange: Drop redundant originator arg from GetTxToReconsider (Anthony Towns)
a4fe09973a txorphanage: index workset by originating peer (Anthony Towns)
Pull request description:
We currently process orphans by assigning them to the peer that provided a missing parent; instead assign them to the peer that provided the orphan in the first place. This prevents a peer from being able to marginally delay another peer's transactions and also simplifies the internal API slightly. Because we're now associating orphan processing with the peer that provided the orphan originally, we no longer process orphans immediately after receiving the parent, but defer until a future call to `ProcessMessage`.
Based on #26295
ACKs for top commit:
naumenkogs:
utACK c58c249a5b
glozow:
ACK c58c249a5b
mzumsande:
Code Review ACK c58c249a5b
Tree-SHA512: 3186c346f21e60440266a2a80a9d23d7b96071414e14b2b3bfe50457c04c18b1eab109c3d8c2a7726a6b10a2eda1f0512510a52c102da112820a26f5d96f12de
When PR#15644 made orphan processing interruptible, it also introduced a
potential 100ms delay between processing of the first and second newly
reconsiderable orphan, because it didn't check if the orphan work set
was non-empty after invoking ProcessMessage(). This adds that check, so
that ProcessMessages() will return true if there are orphans to process,
usually avoiding the 100ms delay in CConnman::ThreadMessageHandler().
If we made progress on orphans, consider that enough work for this peer
for this round of ProcessMessages. This also allows cleaning up the api
for TxOrphange:GetTxToReconsider().
Previously, when we processed a new tx we would attempt to ATMP any
orphans that considered the new tx a parent immediately, but would only
accept at most one such tx, leaving any others to be considered on a
future run of ProcessMessages(). With this patch, we don't attempt any
orphan processing immediately after receiving a tx, instead deferring
all of them until the next call to ProcessMessages().
Both methods do the same thing, so simplify to having just one.
`ToString()` is too generic in this case and it is unclear what it does,
given that there are similar methods:
`ToStringAddr()` (inherited from `CNetAddr`),
`ToStringPort()` and
`ToStringAddrPort()`.
