fae405556d scripted-diff: Rename CBlockTreeDB -> BlockTreeDB (MarcoFalke)
faf63039cc Fixup style of moved code (MarcoFalke)
fa65111b99 move-only: Move CBlockTreeDB to node/blockstorage (MarcoFalke)
fa8685597e index: Drop legacy -txindex check (MarcoFalke)
fa69148a0a scripted-diff: Use blocks_path where possible (MarcoFalke)
Pull request description:
The only reason for the check was to print a warning about an increase in storage use. Now that 22.x is EOL and everyone should have migrated (or decided to not care about storage use), remove the check.
Also, a move-only commit is included. (Rebased from https://github.com/bitcoin/bitcoin/pull/22242)
ACKs for top commit:
TheCharlatan:
ACK fae405556d, though I lack historical context to really judge the second commit fa8685597e.
stickies-v:
ACK fae405556d
Tree-SHA512: 9da8f48767ae52d8e8e21c09a40c949cc0838794f1856cc5f58a91acd3f00a3bca818c8082242b3fdc9ca5badb09059570bb3870850d3807b75a8e23b5222da1
fb02ba3c5f mempool_entry: improve struct packing (Anthony Towns)
1a118062fb net_processing: Clean up INVENTORY_BROADCAST_MAX constants (Anthony Towns)
6fa49937e4 test: Check tx from disconnected block is immediately requestable (glozow)
e4ffabbffa net_processing: don't add txids to m_tx_inventory_known_filter (Anthony Towns)
6ec1809d33 net_processing: drop m_recently_announced_invs bloom filter (Anthony Towns)
a70beafdb2 validation: when adding txs due to a block reorg, allow immediate relay (Anthony Towns)
1e9684f39f mempool_entry: add mempool entry sequence number (Anthony Towns)
Pull request description:
This PR replaces the `m_recently_announced_invs` bloom filter with a simple sequence number tracking the mempool state when we last considered sending an INV message to a node. This saves 33kB per peer (or more if we raise the rate at which we relay transactions over the network, in which case we would need to increase the size of the bloom filter proportionally).
The philosophy here (compare with #18861 and #19109) is that we consider the rate limiting on INV messages to only be about saving bandwidth and not protecting privacy, and therefore after you receive an INV message, it's immediately fair game to request any transaction that was in the mempool at the time the INV message was sent. We likewise consider the BIP 133 feefilter and BIP 37 bloom filters to be bandwidth optimisations here, and treat transactions as requestable if they would have been announced without those filters. Given that philosophy, tracking the timestamp of the last INV message and comparing that against the mempool entry time allows removal of each of `m_recently_announced_invs`, `m_last_mempool_req` and `UNCONDITIONAL_RELAY_DELAY` and associated logic.
ACKs for top commit:
naumenkogs:
ACK fb02ba3c5f
amitiuttarwar:
review ACK fb02ba3c5f
glozow:
reACK fb02ba3c5f
Tree-SHA512: cbba5ee04c86df26b6057f3654c00a2b45ec94d354f4f157a769cecdaa0b509edaac02b3128afba39b023e82473fc5e28c915a787f84457ffe66638c6ac9c2d4
The block index (CBlockTreeDB) is required to write and read blocks, so
move it to blockstorage. This allows to drop the txdb.h include from
`node/blockstorage.h`.
Can be reviewed with:
--color-moved=dimmed-zebra --color-moved-ws=ignore-all-space
1cd45d4e08 test: move random.h include header from setup_common.h to cpp (Jon Atack)
1b246fdd14 test: move remaining random test util code from setup_common to random (jonatack)
Pull request description:
and drop the `util/random` dependency on `util/setup_common`. This improves code separation and allows `util/setup_common` to call `util/random` functions without creating a circular dependency, thereby addressing https://github.com/bitcoin/bitcoin/pull/26940#issuecomment-1497266140 by glozow (thanks!)
ACKs for top commit:
MarcoFalke:
lgtm ACK 1cd45d4e08🌂
Tree-SHA512: 6ce63d9103ba9b04eebbd8ad02fe9aa79e356296533404034a1ae88e9b7ca0bc9a5c51fd754b71cf4e7b55b18bcd4d5474b2d588edee3851e3b3ce0e4d309a93
At present, during init, we traverse the chain (once per index)
to confirm that all necessary blocks to sync each index up to
the current tip are present.
To make the process more efficient, we can fetch the oldest block
from the indexers and perform the chain data existence check from
that point only once.
This also moves the pruning violation check to the end of the
'loadinit' thread, which is where the reindex, block loading and
chain activation processes happen.
Making the node's startup process faster, allowing us to remove
the global g_indexes_ready_to_sync flag, and enabling the
execution of the pruning violation verification even when the
reindex or reindex-chainstate flags are enabled (which has being
skipped so far).
FatalError replaces what previously was the AbortNode function in
shutdown.cpp.
This commit is part of the libbitcoinkernel project and further removes
the shutdown's and, more generally, the kernel library's dependency on
interface_ui with a kernel notification method. By removing interface_ui
from the kernel library, its dependency on boost is reduced to just
boost::multi_index. At the same time it also takes a step towards
de-globalising the interrupt infrastructure.
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: TheCharlatan <seb.kung@gmail.com>
This is done in addition with the following commit. Both have the goal
of getting rid of direct calls to AbortNode from kernel code. This extra
flushError method is added to notify specifically about errors that
arrise when flushing (syncing) block data to disk. Unlike other
instances, the current calls to AbortNode in the blockstorage flush
functions do not report an error to their callers.
This commit is part of the libbitcoinkernel project and further removes
the shutdown's and, more generally, the kernel library's dependency on
interface_ui with a kernel notification method. By removing interface_ui
from the kernel library, its dependency on boost is reduced to just
boost::multi_index. At the same time it also takes a step towards
de-globalising the interrupt infrastructure.
This and the following commit seek to decouple the libbitcoinkernel
library from the shutdown code. As a library, it should it should have
its own flexible interrupt infrastructure without relying on node-wide
globals.
The commit takes the first step towards this goal by de-globalising
`ShutdownRequested` calls in kernel code.
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: TheCharlatan <seb.kung@gmail.com>
If -acceptstalefeeestimates option is passed stale fee estimates can now
be read when operating in regtest environments.
Additionally, this commit updates all declarations of the CBlockPolicyEstimator
class to include a the second constructor variable.
and drop the util/random dependency on util/setup_common.
This improves code separation and avoids creating a circular dependency if
setup_common needs to call the util/random functions.
Since the kernel library no longer depends on the system file, move it
to the common library instead in accordance to the diagram in
doc/design/libraries.md.
This commit is part of the libbitcoinkernel project and seeks to remove
the ChainstateManager's and, more generally, the kernel library's
dependency on interface_ui with options methods in this and the following
few commits. By removing interface_ui from the kernel library, its
dependency on boost is reduced to just boost::multi_index.
Define a new kernel notification class with virtual methods for
notifying about internal kernel events. Create a new file in the node
library for defining a function creating the default set of notification
methods such that these do not need to be re-defined all over the
codebase. As a first step, add a `blockTip` method, wrapping
`uiInterface.NotifyBlockTip`.
This is achieved by letting the index sync thread wait until
reindex-chainstate is finished.
This also disables the pruning check when reindexing the chainstate (which is
incompatible with prune mode) because there would be no chain at this point
in init.
Add a blocks_dir field to the BlockManager options. Move functions
relying on the global gArgs to get the blocks_dir into the BlockManager
class.
This should eventually allow users of the BlockManager to not rely on
the global Args and instead pass in their own options.
This commit effectively moves the definition of these constants
out of the chainparamsbase to their own file.
Using the ChainType enums provides better type safety compared to
passing around strings.
The commit is part of an ongoing effort to decouple the libbitcoinkernel
library from the ArgsManager and other functionality that should not be
part of the kernel library.
bf77fc9cb4 [test] mempool full in package accept (glozow)
b51ebccc28 [validation] set PackageValidationState when mempool full (glozow)
563a2ee4f5 [policy] disallow transactions under min relay fee, even in packages (glozow)
c4554fe894 [test] package cpfp bumps parents <mempoolminfee but >=minrelaytxfee (glozow)
ac463e87df [test util] mock mempool minimum feerate (glozow)
Pull request description:
Part of package relay, see #27463.
Note that this still allows packages to bump transactions that are below the dynamic mempool minimum feerate, which means this still solves the "mempool is congested and my presigned 1sat/vB tx is screwed" problem for all transactions.
On master, the package policy (only accessible through regtest-only RPC submitpackage) allows 0-fee (or otherwise below min relay feerate) transactions if they are bumped by a child. However, with default package limits, we don't yet have a DoS-resistant way of ensuring these transactions remain bumped throughout their time in the mempool. Primarily, the fee-bumping child may later be replaced by another transaction that doesn't bump the parent(s). The parent(s) could potentially stay bumped by other transactions, but not enough to ever be selected by the `BlockAssembler` (due to `blockmintxfee`).
For example, (tested [here](https://github.com/glozow/bitcoin/commits/26933-motivation)):
- The mempool accepts 24 below-minrelayfeerate transactions ("0-fee parents"), all bumped by a single high-fee transaction ("the fee-bumping child"). The fee-bumping child also spends a confirmed UTXO.
- Two additional children are added to each 0-fee parent. These children each pay a feerate slightly above the minimum relay feerate (e.g. 1.9sat/vB) such that, for each 0-fee parent, the total fees of its two children divided by the total size of the children and parent is above the minimum relay feerate.
- If a block template is built now, all transactions would be selected.
- A transaction replaces the the fee-bumping child, spending only the confirmed UTXO and not any of the outputs from the 0-fee parents.
- The 0-fee parents now each have 2 children. Their descendant feerates are above minrelayfeerate, which means that they remain in the mempool, even if the mempool evicts all below-minrelayfeerate packages.
- If a block template is built now, none of the 0-fee parents or their children would be selected.
- Even more low-feerate descendants can be added to these below-minrelayfeerate packages and they will not be evicted until they expire or the mempool reaches capacity.
Unless we have a DoS-resistant way of ensuring package CPFP-bumped transactions are always bumped, allowing package CPFP to bump below-minrelayfeerate transactions can result in these problematic situations. See #27018 which proposes a partial solution with some limitations, and contains discussion about potential improvements to eviction strategy. While no adequate solution exists, for now, avoid these situations by requiring all transactions to meet min relay feerate.
ACKs for top commit:
ajtowns:
reACK bf77fc9cb4
instagibbs:
re-ACK bf77fc9cb4
Tree-SHA512: 28940f41493a9e280b010284316fb8caf1ed7b2090ba9a4ef8a3b2eafc5933601074b142f4f7d4e3c6c4cce99d3146f5c8e1393d9406c6f2070dd41c817985c9
This is an extraction of ArgsManager related functions from util/system
into their own common file.
Config file related functions are moved to common/config.cpp.
The background of this commit is an ongoing effort to decouple the
libbitcoinkernel library from the ArgsManager. The ArgsManager belongs
into the common library, since the kernel library should not depend on
it. See doc/design/libraries.md for more information on this rationale.
0af16e7134 doc: add release note for #25574 (Martin Zumsande)
57ef2a4812 validation: report if pruning prevents completion of verification (Martin Zumsande)
0c7785bb25 init, validation: Improve handling if VerifyDB() fails due to insufficient dbcache (Martin Zumsande)
d6f781f1cf validation: return VerifyDBResult::INTERRUPTED if verification was interrupted (Martin Zumsande)
6360b5302d validation: Change return value of VerifyDB to enum type (Martin Zumsande)
Pull request description:
`VerifyDB()` can fail to complete due to insufficient dbcache at the level 3 checks. This PR improves the error handling in this case in the following ways:
- The rpc `-verifychain` now returns false if the check can't be completed due to insufficient cache
- During init, we only log a warning if the default values for `-checkblocks` and `-checklevel` are taken and the check doesn't complete. However, if the user actively specifies one of these args, we return with an InitError if we can't complete the check.
This PR also changes `-verifychain` RPC to return `false` if the verification didn't finish due to missing block data (pruning) or due to being interrupted by the node being shutdown.
Previously, this PR also included a fix for a possible assert during verification - this was done in #27009 (now merged).
ACKs for top commit:
achow101:
ACK 0af16e7134
ryanofsky:
Code review ACK 0af16e7134. Only small suggested changes since the last review, like renaming some of the enum values. I did leave more suggestions, but they are not very important and could be followups
john-moffett:
ACK 0af16e7134
MarcoFalke:
lgtm re-ACK 0af16e7134 🎚
Tree-SHA512: 84b4f767cf9bfbafef362312757c9bf765b41ae3977f4ece840e40c52a2266b1457832df0cdf70440be0aac2168d9b58fc817238630b0b6812f3836ca950bc0e
The rpc command verifychain now fails if the dbcache was not sufficient
to complete the verification at the specified level and depth.
In the same situation, the VerifyDB check during Init will now fail (and lead to
an early shutdown) if the user has explicitly specified -checkblocks or
-checklevel but the check couldn't be executed because of the limited
cache. If the user didn't change any of the two and is using the defaults, log a warning
but don't prevent the node from starting up.
Use DBParams struct to remove ArgsManager uses from txdb.
To reduce size of this commit, this moves references to gArgs variable out of
txdb.cpp to calling code in chainstate.cpp. But these moves are temporary. The
gArgs references in chainstate.cpp are moved out to calling code in init.cpp in
later commits.
This commit does not change behavior.
04528054fc [bench] BlockAssembler with mempool packages (glozow)
6ce265acf4 [test util] lock cs_main before pool.cs in PopulateMempool (glozow)
8791410662 [test util] randomize fee in PopulateMempool (glozow)
cba5934eb6 [miner] allow bypassing TestBlockValidity (glozow)
c058852308 [refactor] parameterize BlockAssembler::Options in PrepareBlock (glozow)
a2de971ba1 [refactor] add helper to apply ArgsManager to BlockAssembler::Options (glozow)
Pull request description:
Performance of block template building matters as miners likely want to be able to start mining on a block with transactions asap after a block is found. We would want to know if a mempool PR accidentally caused, for example, a 100x slowdown. An `AssembleBlock()` bench exists, but it operates on a mempool with 101 transactions, each with 0 ancestors or descendants and with the same fee. Adding a bench with a more complex mempool is useful because (1) it's more realistic (2) updating packages can potentially cause the algorithm to take a long time.
ACKs for top commit:
kevkevinpal:
Tested ACK [0452805](04528054fc)
achow101:
ACK 04528054fc
stickies-v:
ACK 04528054f
Tree-SHA512: 38c138d6a75616651f9b1faf4e3a1cd833437a486f4e84308fbee958e8462bb570582c88f7ba7ab99d80191e97855ac2cf27c43cc21585d3e4b0e227effe2fb5
This makes the contents of the mempool more realistic and iterating by
ancestor feerate order more meaningful. If transactions have varying
feerates, it's also more likely that packages will need to be updated
during block template assembly.
c8dc0e3eaa refactor: Inline `CTxMemPoolEntry` class's functions (Hennadii Stepanov)
75bbe594e5 refactor: Move `CTxMemPoolEntry` class to its own module (Hennadii Stepanov)
Pull request description:
This PR:
- gets rid of the `policy/fees` -> `txmempool` -> `policy/fees` circular dependency
- is an alternative to #13949, which nukes only one circular dependency
ACKs for top commit:
ryanofsky:
Code review ACK c8dc0e3eaa. Just include and whitespace changes since last review, and there's a moveonly commit now so it's very easy to review
theStack:
Code-review ACK c8dc0e3eaa
glozow:
utACK c8dc0e3eaa, agree these changes are an improvement.
Tree-SHA512: 36ece824e6ed3ab1a1e198b30a906c8ac12de24545f840eb046958a17315ac9260c7de26e11e2fbab7208adc3d74918db7a7e389444130f8810548ca2e81af41
aaaa7bd0ba iwyu: Add missing includes (MacroFake)
fa9ebec096 Remove g_parallel_script_checks (MacroFake)
fa7c834b9f Move ::fCheckBlockIndex into ChainstateManager (MacroFake)
fa43188d86 Move ::fCheckpointsEnabled into ChainstateManager (MacroFake)
cccca83099 Move ::nMinimumChainWork into ChainstateManager (MacroFake)
fa29d0b57c Move ::hashAssumeValid into ChainstateManager (MacroFake)
faf44876db Move ::nMaxTipAge into ChainstateManager (MacroFake)
Pull request description:
It seems preferable to assign globals to a class (in this case `ChainstateManager`), than to leave them dangling. This should clarify scope for code-readers, as well as clarifying unit test behaviour.
ACKs for top commit:
dergoegge:
Code review ACK aaaa7bd0ba
ryanofsky:
Code review ACK aaaa7bd0ba. No changes since last review, other than rebase
aureleoules:
reACK aaaa7bd0ba
Tree-SHA512: 83ec3ba0fb4f1dad95810d4bd4e578454e0718dc1bdd3a794cc4e48aa819b6f5dad4ac4edab3719bdfd5f89cbe23c2740a50fd56c1ff81c99e521c5f6d4e898d
This changes the flag for the bitcoin-chainstate executable. Previously
it was false, now it is the chain's default value (still false for the
main chain).
in TestingSetup(). This is used in the following commit to test
reinitializing chainstates after snapshot validation and cleanup.
Best reviewed with `git diff --color-moved=dimmed-zebra`.
