bfb9b94ebe wallet: remove duplicate descriptor type check in GetNewDestination (furszy)
76b982a4a5 wallet: remove unused `nAccountingEntryNumber` field (furszy)
599ff5adfc wallet: avoid double TopUp() calls on descriptor wallets (furszy)
Pull request description:
Found it while was digging over a `getnewaddress` timeout on the functional test suite.
### Context:
We are calling `TopUp()` twice in the following flows for descriptor wallets:
A) `CWallet::GetNewDestination`:
1) Calls spk_man->TopUp()
2) Calls spk_man->GetNewDestination() --> which, after the basic script checks, calls TopUp() again.
B) `CWallet::GetReservedDestination`:
1) Calls spk_man->TopUp()
2) Calls spk_man->GetReservedDestination() --> which calls to GetNewDestination (which calls to TopUp again).
### Changes:
Move `TopUp()` responsibility from the wallet class to each scriptpubkeyman.
So each spkm can decide to call it or not after perform the basic checks
for the new destination request.
Aside from that, remove the unused `nAccountingEntryNumber` wallet field. And a duplicated descriptor type check in `GetNewDestination`
ACKs for top commit:
aureleoules:
re-ACK bfb9b94ebe.
achow101:
ACK bfb9b94ebe
theStack:
Code-review ACK bfb9b94ebe
Tree-SHA512: 3ab73f37729e50d6c6a4434f676855bc1fb404619d63c03e5b06ce61c292c09c59d64cb1aa3bd9277b06f26988956991d62c90f9d835884f41ed500b43a12058
b01682a812 refactor: revert m_next_resend to not be std::atomic (stickies-v)
9245f45670 wallet: only update m_next_resend when actually resending (stickies-v)
7fbde8af5c refactor: carve out tx resend timer logic into ShouldResend (stickies-v)
01f3534632 refactor: remove unused locks for ResubmitWalletTransactions (stickies-v)
c6e8e11fb0 wallet: fix capitalization in docstring (stickies-v)
Pull request description:
This PR addresses the outstanding comments/issues from #25768:
- capitalization [typo](https://github.com/bitcoin/bitcoin/pull/25768#discussion_r958572522) in docstring
- remove [unused locks](01f3534632) that we previously needed for `ReacceptWalletTransactions()`
- before #25768, only `ResendWalletTransactions()` would reset `m_next_resend` (formerly called `nNextResend`). By unifying it with `ReacceptWalletTransactions()` into `ResubmitWalletTransactions()`, the number of callsites that would reset the `m_next_resend` timer increased
- since `m_next_resend` is only used in case of `relay=true` (formerly `ResendWalletTransactions()`), this is unintuitive
- it leads to [unexpected behaviour](https://github.com/bitcoin/bitcoin/pull/25768#issuecomment-1252619427) such as transactions potentially never being rebroadcasted.
- it makes the ResubmitWalletTransactions()` logic [more complicated than strictly necessary](https://github.com/bitcoin/bitcoin/pull/25768#discussion_r962828563)
- since #25768, we relied on an earlier call of `ResubmitWalletTransactions(relay=false, force=true)` to initialize `m_next_resend()`, I think we can more elegantly do that by just providing `m_next_resend` with a default value
- just to highlight: this commit introduces behaviour change
Note: the `if (!fBroadcastTransactions)` in `CWallet:ShouldResend()` is duplicated on purpose, since it potentially avoids the slightly more expensive `if (!chain().isReadyToBroadcast())` check afterwards. I don't have a strong view on it, so happy to remove that additional check to reduce the diff, too.
ACKs for top commit:
aureleoules:
ACK b01682a812
achow101:
ACK b01682a812
Tree-SHA512: ac5f1d8858f8dd736dd1480f385984d660c1916b62a42562317020e8f9fd6a30bd8f23d973d47e4c9480d744c5ba39fdbefd69568a5eb0589a8422d7e5971c1c
Since m_next_resend is now only called from MaybeResendWalletTxs()
we don't have any potential race conditions anymore, so the usage
of std::atomic can be reverted.
We only want to relay our resubmitted transactions once every 12-36h.
By separating the timer update logic out of ResubmitWalletTransactions
and into MaybeResendWalletTxs we avoid non-relay calls (previously in
the separate ReacceptWalletTransactions function) from resetting that
timer.
Moves the logic of whether or not transactions should actually be
resent out of the function that's resending them. This reduces
responsibilities of ResubmitWalletTransactions and allows
carving out the updating of m_next_resend in a future commit.
3405f3eed5 test: Test that an unconfirmed not-in-mempool chain is rebroadcast (Andrew Chow)
10d91c5abe wallet: Deduplicate Resend and ReacceptWalletTransactions (Andrew Chow)
Pull request description:
Currently `ResendWalletTransactions` (used for normal rebroadcasts) will attempt to rebroadcast all of the transactions in the wallet in the order they are stored in `mapWallet`. This ends up being random as `mapWallet` is a `std::unordered_map`. However `ReacceptWalletTransactions` (used for adding to the mempool on loading) first sorts the txs by wallet insertion order, then submits them. The result is that `ResendWalletTranactions` will fail to rebroadcast child transactions if their txids happen to be lexicographically less than their parent's txid. This PR resolves this issue by combining `ReacceptWalletTransactions` and `ResendWalletTransactions` into a new `ResubmitWalletTransactions` so that the iteration code and basic checks are shared.
A test has also been added that checks that such transaction chains are rebroadcast correctly.
ACKs for top commit:
naumenkogs:
utACK 3405f3eed5
1440000bytes:
reACK 3405f3eed5
furszy:
Late code review ACK 3405f3ee
stickies-v:
ACK 3405f3eed5
Tree-SHA512: 1240d9690ecc2ae8d476286b79e2386f537a90c41dd2b8b8a5a9c2a917aa3af85d6aee019fbbb05e772985a2b197e2788305586d9d5dac78ccba1ee5aa31d77a
53e7ed075c doc: Release notes and other docs for migration (Andrew Chow)
9c44bfe244 Test migratewallet (Andrew Chow)
0b26e7cdf2 descriptors: addr() and raw() should return false for ToPrivateString (Andrew Chow)
31764c3f87 Add migratewallet RPC (Andrew Chow)
0bf7b38bff Implement MigrateLegacyToDescriptor (Andrew Chow)
e7b16f925a Implement MigrateToSQLite (Andrew Chow)
5b62f095e7 wallet: Refactor SetupDescSPKMs to take CExtKey (Andrew Chow)
22401f17e0 Implement LegacyScriptPubKeyMan::DeleteRecords (Andrew Chow)
35f428fae6 Implement LegacyScriptPubKeyMan::MigrateToDescriptor (Andrew Chow)
ea1ab390e4 scriptpubkeyman: Implement GetScriptPubKeys in Legacy (Andrew Chow)
e664af2976 Apply label to all scriptPubKeys of imported combo() (Andrew Chow)
Pull request description:
This PR adds a new `migratewallet` RPC which migrates a legacy wallet to a descriptor wallet. Migrated wallets will need a new backup. If a wallet has watchonly stuff in it, a new watchonly descriptor wallet will be created containing those watchonly things. The related transactions, labels, and descriptors for those watchonly things will be removed from the original wallet. Migrated wallets will not have any of the legacy things be available for fetching from `getnewaddress` or `getrawchangeaddress`. Wallets that have private keys enabled will have newly generated descriptors. Wallets with private keys disabled will not have any active `ScriptPubKeyMan`s.
For the basic HD wallet case of just generated keys, in addition to the standard descriptor wallet descriptors using the master key derived from the pre-existing hd seed, the migration will also create 3 descriptors for each HD chain in: a ranged combo external, a ranged combo internal, and a single key combo for the seed (the seed is a valid key that we can receive coins at!). The migrated wallet will then have newly generated descriptors as the active `ScriptPubKeyMan`s. This is equivalent to creating a new descriptor wallet and importing the 3 descriptors for each HD chain. For wallets containing non-HD keys, each key will have its own combo descriptor.
There are also tests.
ACKs for top commit:
Sjors:
tACK 53e7ed075c
w0xlt:
reACK 53e7ed075c
Tree-SHA512: c0c003694ca2e17064922d08e8464278d314e970efb7df874b4fe04ec5d124c7206409ca701c65c099d17779ab2136ae63f1da2a9dba39b45f6d62cf93b5c60a
Both of these functions do almost the exact same thing. They can be
deduplicated so that their behavior matches except for the filtering
aspect. As this function will now always be called on wallet loading,
nNextResend will also always be initialized, so
wallet_resendwallettransactions.py is updated to account for that.
This also resolves a bug where ResendWalletTransactions would fail to
rebroadcast txs in insertion order thereby potentially rebroadcasting a
child transaction before its parent and causing the child to not
actually get rebroadcast.
Also names the combined function to ResubmitWalletTransactions as the
function just submits the transactions to the mempool rather than doing
any sending by itself.
Refactors SetupDescSPKMs so that the DescSPKM loops are in their own
function. This allows us to call it later during migration with a key
that was already generated.
1dc03dda05 [doc] remove non-signaling mentions of BIP125 (glozow)
32024d40f0 scripted-diff: remove mention of BIP125 from non-signaling var names (glozow)
Pull request description:
We have pretty thorough documentation of our RBF policy in doc/policy/mempool-replacements.md. It enumerates each rule with several sentences of rationale. Also, each rule pretty much has its own function (3 and 4 share one), with extensive comments. The doc states explicitly that our rules are similar but differ from BIP125, and contains a record of historical changes to RBF policy.
We should not use "BIP125" as synonymous with our RBF policy because:
- Our RBF policy is different from what is specified in BIP125, for example:
- the BIP does not mention our rule about the replacement feerate being higher (our Rule 6)
- the BIP uses minimum relay feerate for Rule 4, while we have used incremental relay feerate since #9380
- the "inherited signaling" question (CVE-2021-31876). Call it discrepancy, ambiguous wording, doc misinterpretation, or implementation details, I would recommend users refer to doc/policy/mempool-replacements.md
- the signaling policy is configurable, see #25353
- Our RBF policy may change further
- We have already marked BIP125 as only "partially implemented" in docs/bips.md since 1fd49eb498
- See comments from people who are not me recently:
- https://github.com/bitcoin/bitcoin/pull/25038#discussion_r909507429
- https://github.com/bitcoin/bitcoin/pull/25575#issuecomment-1179519204
This PR removes all non-signaling mentions of BIP125 (if people feel strongly, we can remove all mentions of BIP125 period). It may be useful to refer to the concept of "tx opts in to RBF if it has at least one nSequence less than (0xffffffff - 1)" as "BIP125 signaling" because:
- It is succint.
- It has already been widely marketed as BIP125 opt-in signaling.
- Our API uses it when referring to signaling (e.g. getmempoolentry["bip125-replaceable"] and wallet error message "not BIP 125 replaceable"). Changing those is more invasive.
- If/when we have other ways to signal in the future, we can disambiguate them this way. See #25038 which proposes another way of signaling, and where I pulled these commits from.
Alternatives:
- Changing our policy to match BIP125. This doesn't make sense as, for example, we would have to remove the requirement that a replacement tx has a higher feerate (Rule 6).
- Changing BIP125 to match what we have. This doesn't make sense as it would be a significant change to a BIP years after it was finalized and already used as a spec to implement RBF in other places.
- Document our policy as a new BIP and give it a number. This might make sense if we don't expect things to change a lot, and can be done as a next step.
ACKs for top commit:
darosior:
ACK 1dc03dda05
ariard:
ACK 1dc03dda
t-bast:
ACK 1dc03dda05
Tree-SHA512: a3adc2039ec5785892d230ec442e50f47f7062717392728152bbbe27ce1c564141f85253143f53cb44e1331cf47476d74f5d2f4b3cd873fc3433d7a0aa783e02
0cb6d2aec6 Bugfix: Wallet: Document expectations for AddWalletFlags (now InitWalletFlags) correctly (Luke Dashjr)
Pull request description:
Includes some slight refactoring (return type changed, current status checked)
ACKs for top commit:
achow101:
ACK 0cb6d2aec6
w0xlt:
ACK 0cb6d2aec6
ryanofsky:
Code review ACK 0cb6d2aec6. This is a clarifying change, and should prevent the InitWalletFlags method being called incorrectly. I left a comment suggestion, but feel free to ignore it.
Tree-SHA512: fa18e9471b5e89d35cbc01526e6d4dbe4eee8faa9646847248909af1751b33014a6f9a42fe70a1331c0d73adea79008b8fc3ae2b51a641eba3e36d5c631327f6
ef8e2a5b09 tests: Test that external inputs of txs in wallet is handled correctly (Andrew Chow)
eb879634db wallet: Try estimating input size with external data if wallet fails (Andrew Chow)
a537d7aaa0 wallet: SelectExternal actually external inputs (Andrew Chow)
f2d00bfe1a wallet: Add CWallet::IsMine(COutPoint) (Andrew Chow)
Pull request description:
if a transaction is being funded that has an external input, and that input's parent is also in the wallet, we will fail to detect that and fail to fund the transaction. In order to correctly detect such inputs, we need to be doing `IsMine` on all specified inputs in order to use `Select` and `SelectExternal` correctly. Additionally `SelectCoins` needs to call `CalculateMaximumSignedInputSize` with the correct parameters which depends on whether the wallet is able to solve for the input. Because there are some situations where the wallet could find an external input to belong to it (e.g. watching an address - unable to solve, but will be ISMINE_WATCHONLY), instead of switching which `CalculateMaximumSignedInputSize` to use, we should call the one that uses the wallet, and if that fails, try again with the one that uses external solving data.
Also adds a test for this case.
ACKs for top commit:
instagibbs:
ACK ef8e2a5b09
furszy:
ACK ef8e2a5b
ishaanam:
reACK ef8e2a5b09
Tree-SHA512: a43c4aefeed4605f33a36ce87ebb916e2c153fea6d415b02c9a89275e84a7e3bf12840b33c296d2d2bde46350390da48d9262f9567338e3f21d5936aae4caa1e
a6b0c1fcc0 doc: add releases notes for 25504 (listsinceblock updates) (Antoine Poinsot)
0fd2d14454 rpc: add an include_change parameter to listsinceblock (Antoine Poinsot)
55f98d087e rpc: output parent wallet descriptors for coins in listunspent (Antoine Poinsot)
b724476158 rpc: output wallet descriptors for received entries in listsinceblock (Antoine Poinsot)
55a82eaf91 wallet: allow to fetch the wallet descriptors for a given Script (Antoine Poinsot)
Pull request description:
Wallet descriptors are useful for applications using the Bitcoin Core wallet as a backend for tracking coins, as they allow to track coins for multiple descriptors in a single wallet. However there is no information currently given for such applications to link a coin with an imported descriptor, severely limiting the possibilities for such applications of using multiple descriptors in a single wallet. This PR outputs the matching imported descriptor(s) for a given received coin in `listsinceblock` (and friends).
It comes from a need for an application i'm working on, but i think it's something any software using `bitcoind` to track multiple descriptors in a single wallet would have eventually. For instance i'm thinking about the BDK project. Currently, the way to achieve this is to import raw addresses with labels and to have your application be responsible for wallet things like the gap limit.
I'll add this to the output of `listunspent` too if this gets a few Concept ACKs.
ACKs for top commit:
instagibbs:
ACK a6b0c1fcc0
achow101:
re-ACK a6b0c1fcc0
Tree-SHA512: 7a5850e8de98b439ddede2cb72de0208944f8cda67272e8b8037678738d55b7a5272375be808b0f7d15def4904430e089dafdcc037436858ff3292c5f8b75e37
76b3c37fcb refactor: wallet: return util::Result from `GetReservedDestination` methods (Sebastian Falbesoner)
Pull request description:
This PR is a follow-up to #25218, as suggested in comment https://github.com/bitcoin/bitcoin/pull/25218#discussion_r907710067. The interfaces of the methods `ReserveDestination::GetReservedDestination`, `{Legacy,Descriptor,}ScriptPubKeyMan::GetReservedDestination` are improved by returning `util::Result<CTxDestination>` instead of `bool` in order to get rid of the two `CTxDestination&` and `bilingual_str&` out-parameters.
ACKs for top commit:
furszy:
ACK 76b3c37f
Tree-SHA512: bf15560a88d645bcf8768024013d36012cd65caaa4a613e8a055dfd8f29cb4a219c19084606992bad177920cdca3a732ec168e9b9526f9295491f2cf79cc6815
bc886fcb31 Change mapWallet to be a std::unordered_map (Andrew Chow)
272356024d Change getWalletTxs to return a set instead of a vector (Andrew Chow)
97532867cf Change mapTxSpends to be a std::unordered_multimap (Andrew Chow)
1f798fe85b wallet: Cache SigningProviders (Andrew Chow)
8a105ecd1a wallet: Use CalculateMaximumSignedInputSize to indicate solvability (Andrew Chow)
Pull request description:
While running my coin selection simulations, I noticed that towards the end of the simulation, the wallet would become slow to make new transactions. The wallet generally performs much more slowly when there are a large number of transactions and/or a large number of keys. The improvements here are focused on wallets with a large number of transactions as that is what the simulations produce.
Most of the slowdown I observed was due to `DescriptorScriptPubKeyMan::GetSigningProvider` re-deriving keys every time it is called. To avoid this, it will now cache the `SigningProvider` produced so that repeatedly fetching the `SigningProvider` for the same script will not result in the same key being derived over and over. This has a side effect of making the function non-const, which makes a lot of other functions non-const as well. This helps with wallets with lots of address reuse (as my coin selection simulations are), but not if addresses are not reused as keys will end up needing to be derived the first time `GetSigningProvider` is called for a script.
The `GetSigningProvider` problem was also exacerbated by unnecessarily fetching a `SigningProvider` for the same script multiple times. A `SigningProvider` is retrieved to be used inside of `IsSolvable`. A few lines later, we use `GetTxSpendSize` which fetches a `SigningProvider` and then calls `CalculateMaximumSignedInputSize`. We can avoid a second call to `GetSigningProvider` by using `CalculateMaximumSignedInputSize` directly with the `SigningProvider` already retrieved for `IsSolvable`.
There is an additional slowdown where `ProduceSignature` with a dummy signer is called twice for each output. The first time is `IsSolvable` checks that `ProduceSignature` succeeds, thereby informing whether we have solving data. The second is `CalculateMaximumSignedInputSize` which returns -1 if `ProduceSignature` fails, and returns the input size otherwise. We can reduce this to one call of `ProduceSignature` by using `CalculateMaximumSignedInputSize`'s result to set `solvable`.
Lastly, a lot of time is spent looking in `mapWallet` and `mapTxSpends` to determine whether an output is already spent. The performance of these lookups is slightly improved by changing those maps to use `std::unordered_map` and `std::unordered_multimap` respectively.
ACKs for top commit:
Xekyo:
ACK bc886fcb31
furszy:
diff re-reACK bc886fcb
Tree-SHA512: fd710fe1224ef67d2bb83d6ac9e7428d9f76a67f14085915f9d80e1a492d2c51cb912edfcaad1db11c2edf8d2d97eb7ddd95bfb364587fb1f143490fd72c9ec1
Our RBF policy is different from the rules specified in BIP125. For
example, the BIP does not mention Rule 6, and our Rule 4 uses the
(configurable) incremental relay feerate (distinct from the
minimum relay feerate). Those interested in our policy should refer to
doc/policy/mempool-replacements.md instead. These rules may also
continue to diverge with package RBF and other RBF improvements. Keep
references to the BIP125 signaling wrt sequence numbers, since that is
still correct and widely used. It is helpful to refer to this as "BIP125
signaling" since it is unambiguous and succint, especially if we have
multiple ways to signal replaceability in the future.
The rule numbers in doc/policy/mempool-replacements.md correspond
largely to those of BIP 125, so we can still refer to them like "Rule 5."
Rename `BResult` class to `util::Result` and update the class interface to be
more compatible with `std::optional` and with a full-featured result class
implemented in https://github.com/bitcoin/bitcoin/pull/25665. Motivation for
this change is to update existing `BResult` usages now so they don't have to
change later when more features are added in #25665.
This change makes the following improvements originally implemented in #25665:
- More explicit API. Drops potentially misleading `BResult` constructor that
treats any bilingual string argument as an error. Adds `util::Error`
constructor so it is never ambiguous when a result is being assigned an error
or non-error value.
- Better type compatibility. Supports `util::Result<bilingual_str>` return
values to hold translated messages which are not errors.
- More standard and consistent API. `util::Result` supports most of the same
operators and methods as `std::optional`. `BResult` had a less familiar
interface with `HasRes`/`GetObj`/`ReleaseObj` methods. The Result/Res/Obj
naming was also not internally consistent.
- Better code organization. Puts `src/util/` code in the `util::` namespace so
naming reflects code organization and it is obvious where the class is coming
from. Drops "B" from name because it is undocumented what it stands for
(bilingual?)
- Has unit tests.
9e04cfaa76 test: add coverage for wallet inconsistent state during sync (furszy)
77de5c693f wallet: guard and alert about a wallet invalid state during chain sync (furszy)
Pull request description:
Follow-up work to my comment in #25239.
Guarding and alerting the user about a wallet invalid state during chain synchronization.
#### Explanation
if the `AddToWallet` tx write fails, the method returns a wtx `nullptr` without removing the recently added transaction from the wallet's map.
Which makes that `AddToWalletIfInvolvingMe` return false (even when the tx is on the wallet's map already), --> which makes `SyncTransaction` skip the `MarkInputsDirty` call --> which leads to a wallet invalid state where the inputs of this new transaction are not marked dirty, while the transaction that spends them still exist on the in-memory wallet tx map.
Plus, as we only store the arriving transaction inside `AddToWalletIfInvolvingMe` when we synchronize/scan block/s from the chain and nowhere else, it makes sense to treat the transaction db write error as a runtime error to notify the user about the problem. Otherwise, the user will lose all the not stored transactions after a wallet shutdown (without be able to recover them automatically on the next startup because the chain sync would be above the block where the txs arrived).
Note:
On purpose, the first commit adds test coverage for it. Showing how the wallet can end up in an invalid state. The second commit corrects it with the proposed solution.
ACKs for top commit:
achow101:
re-ACK 9e04cfaa76
jonatack:
ACK 9e04cfaa76
Tree-SHA512: 81f765eca40547d7764833d8ccfae686b67c7728c84271bc00dc51272de643dafc270014079dcc9727b47577ba67b340aeb5f981588b54e69a06abea6958aa96
ab3c06db1a doc: Release notes for default RBF (Andrew Chow)
61d9149e78 rpc: Default rbf enabled (Andrew Chow)
e3c33637ba wallet: Enable -walletrbf by default (Andrew Chow)
Pull request description:
The GUI currently opts in to RBF by default, but RPCs do not, and `-walletrbf` is default disabled. This PR makes the default in those two places to also opt in.
The last time this was proposed (#9527), the primary objections were the novelty at the time, the inability to bump transactions, and the gui not having the option to disable rbf. In the 5 years since, RBF usage has steadily grown, with ~27% of txs opting in. The GUI has the option to enable/disable RBF, and is also defaulted to having it enabled. And we have the ability to bump RBF'd transactions in both the RPC and the GUI. So I think it makes sense to finally change the default to always opt in to RBF.
ACKs for top commit:
darosior:
reACK ab3c06db1a
aureleoules:
ACK ab3c06db1a.
glozow:
utACK ab3c06db1a
Tree-SHA512: 81b012c5033e270f86a87a6a196ccc549eb54b158eebf88e917cc6621d40d7bdcd1566b602688907dd5d364b95a557b29f97dce869cea512e339588262c027b6
Add new interfaces::BlockInfo struct to be able to pass extra block
information (file and undo information) to indexes which they are
updated to use high level interfaces::Chain notifications.
This commit does not change behavior in any way.
-Context:
If `AddToWallet` db write fails, the method returns a wtx nullptr without
removing the recently added transaction from the wallet's map.
-Problem:
When a db write error occurs, `AddToWalletIfInvolvingMe` return false even
when the tx is on the wallet's map already --> which makes `SyncTransaction`
skip the `MarkInputsDirty` call --> which leads to a wallet invalid state
where the inputs of this new transaction are not marked dirty, while the
transaction that spends them still exist on the in-memory wallet tx map.
Plus, as we only store arriving transaction inside `AddToWalletIfInvolvingMe`
when we synchronize/scan blocks from the chain and nowhere else, it makes sense
to treat the tx db write error as a runtime error to notify the user about the
problem. Otherwise, the user will lose all the not stored transactions after a
wallet shutdown (without be able to recover them automatically on the next
startup because the chain sync would be above the block where the txs arrived).
We currently expose a method to get the signing providers, which allows
to infer a descriptor from the scriptPubKey. But in order to identify
"on" what descriptor a coin was received, we need access to the
descriptors that were imported to the wallet.
111ea3ab71 wallet: refactor GetNewDestination, use BResult (furszy)
22351725bc send: refactor CreateTransaction flow to return a BResult<CTransactionRef> (furszy)
198fcca162 wallet: refactor, include 'FeeCalculation' inside 'CreatedTransactionResult' (furszy)
7a45c33d1f Introduce generic 'Result' class (furszy)
Pull request description:
Based on a common function signature pattern that we have all around the sources:
```cpp
bool doSomething(arg1, arg2, arg3, arg4, &result_obj, &error_string) {
// do something...
if (error) {
error_string = "something bad happened";
return false;
}
result = goodResult;
return true;
}
```
Introduced a generic class `BResult` that encapsulate the function boolean result, the result object (in case of having it) and, in case of failure, the string error reason.
Obtaining in this way cleaner function signatures and removing boilerplate code:
```cpp
BResult<Obj> doSomething(arg1, arg2, arg3, arg4) {
// do something...
if (error) return "something bad happened";
return goodResult;
}
```
Same cleanup applies equally to the function callers' side as well. There is no longer need to add the error string and the result object declarations before calling the function:
Before:
```cpp
Obj result_obj;
std::string error_string;
if (!doSomething(arg1, arg2, arg3, arg4, result_obj, error_string)) {
LogPrintf("Error: %s", error_string);
}
return result_obj;
```
Now:
```cpp
BResult<Obj> op_res = doSomething(arg1, arg2, arg3, arg4);
if (!op_res) {
LogPrintf("Error: %s", op_res.GetError());
}
return op_res.GetObjResult();
```
### Initial Implementation:
Have connected this new concept to two different flows for now:
1) The `CreateTransaction` flow. --> 7ba2b87c
2) The `GetNewDestination` flow. --> bcee0912
Happy note: even when introduced a new class into the sources, the amount of lines removed is almost equal to added ones :).
Extra note: this work is an extended version (and a decoupling) of the work that is inside #24845 (which does not contain the `GetNewDestination` changes nor the inclusion of the `FeeCalculation` field inside `CreatedTransactionResult`).
ACKs for top commit:
achow101:
ACK 111ea3ab71
w0xlt:
reACK 111ea3ab71
theStack:
re-ACK 111ea3ab71
MarcoFalke:
review ACK 111ea3ab71🎏
Tree-SHA512: 6d84d901a4cb923727067f25ff64542a40edd1ea84fdeac092312ac684c34e3688a52ac5eb012717d2b73f4cb742b9d78e458eb0e9cb9d6d72a916395be91f69
230a2f4cc3 wallet test: Add unit test for wallet scan save_progress option (Ryan Ofsky)
a89ddfbe22 wallet: Save wallet scan progress (w0xlt)
Pull request description:
Currently, the wallet scan progress is not saved.
If it is interrupted, it will be necessary to start from scratch on the next load.
This PR changes this and the progress is saved right after checking a block.
Close https://github.com/bitcoin/bitcoin/issues/25010
ACKs for top commit:
furszy:
re-ACK 230a2f4
achow101:
ACK 230a2f4cc3
ryanofsky:
Code review ACK 230a2f4cc3. Only change since last review is tweaking whitespace and adding log print
Tree-SHA512: 1a9dec207ed22b3443fb06a4daf967637bc02bcaf71c070b7dc33605d0cab959551e4014c9e92293a63f54c5cbcc98bb9f8844a8c60bc32a1482b1c4130fab32
d54c5c8b1b wallet: use CCoinControl to estimate signature size (S3RK)
a94659c84e wallet: replace GetTxSpendSize with CalculateMaximumSignedInputSize (S3RK)
Pull request description:
Currently `DummySignTx` and `DummySignInput` use different ways to determine signature size.
This PR unifies the way wallet estimates signature size for various inputs.
Instead of passing boolean flags from calling code the `use_max_sig` is now calculated at the place of signature creation using information available in `CCoinControl`
ACKs for top commit:
achow101:
ACK d54c5c8b1b
theStack:
Code-review ACK d54c5c8b1b
Tree-SHA512: e790903ad4683067070aa7dbf7434a1bd142282a5bc425112e64d88d27559f1a2cd60c68d6022feaf6b845237035cb18ece10f6243d719ba28173b69bd99110a
d69045e291 test: add coverage for 'listreceivedbyaddress' no change addrs return (furszy)
324f00a642 refactor: 'ListReceived' use optional for filtered address (furszy)
b459fc122f refactor: RPC 'ListReceived', encapsulate m_address_book access (furszy)
fa9f2ab8fd refactor: RPC 'listlabels', encapsulate 'CWallet::ListAddrBookLabels' functionality (furszy)
83e42c4b94 refactor: use 'ForEachAddrBookEntry' in RPC 'getaddressesbylabel' (furszy)
2b48642499 refactor: use ForEachAddrBookEntry in interfaces::getAddresses (furszy)
032842ae41 wallet: implement ForEachAddrBookEntry method (furszy)
09649bc95d refactor: implement general 'ListAddrBookAddresses' for addressbook destinations lookup (furszy)
192eb1e61c refactor: getAddress don't access m_address_book, use FindAddressEntry function (furszy)
Pull request description:
### Context
The wallet's `m_address_book` field is being accessed directly from several places across the sources.
### Problem
Code structure wise, we shouldn't be accessing it directly. It could end up being modified by mistake (from a place that has nothing to do with the wallet like an RPC command or the GUI) and cause a bigger issue: like an address book entry 'purpose' string change, which if done badly (from 'send' to 'receive'), could end up in a user sharing a "receive" address that he/she doesn't own.
### Solution
Encapsulate `m_address_book` access inside the wallet.
-------------------------------------------------------
Extra Note:
This is the initial step towards decoupling the address book functionality from the wallet's sources. In other words, the creation of the `AddressBookManager` (which will be coming in a follow-up PR).
ACKs for top commit:
achow101:
ACK d69045e291
theStack:
ACK d69045e291✅
w0xlt:
ACK d69045e291
Tree-SHA512: dba17acd86f171b4e9af0223bbbcad380048570f6a2f6a92732a51f01abe8806debaf65c9e9e5569fa76a541903cbb50adcb5f56ef77858151c698ae6b218e2a
Currently, the wallet scan progress is not saved.
If it is interrupted, it will be necessary to start from
scratch on the next load.
With this change, progress is saved every 60 seconds.
Co-authored-by: furszy <matiasfurszyfer@protonmail.com>
Co-authored-by: Jon Atack <jon@atack.com>
Co-authored-by: Ryan Ofsky <ryan@ofsky.org>
This will be used in a follow-up commit to prevent extra 'GetWalletTx' lookups if the function caller already have the wtx and can just provide the scriptPubKey directly.
