b3e78dc91d refactor: Don't use global chainparams in chainstatemanager method (TheCharlatan)
382b692a50 Split non/kernel chainparams (Carl Dong)
edabbc78a3 Add factory functions for Main/Test/Sig/Reg chainparams (Carl Dong)
d938098398 Remove UpdateVersionBitsParameters (Carl Dong)
84b85786f0 Decouple RegTestChainParams from ArgsManager (Carl Dong)
76cd4e7c96 Decouple SigNetChainParams from ArgsManager (Carl Dong)
Pull request description:
This pull request is part of the `libbitcoinkernel` project https://github.com/bitcoin/bitcoin/issues/24303https://github.com/bitcoin/bitcoin/projects/18 and more specifically its "Step 2: Decouple most non-consensus code from libbitcoinkernel". dongcarl is the original author of this patchset, these commits were taken from https://github.com/dongcarl/bitcoin/tree/2022-03-libbitcoinkernel-chainparams-args-only.
#### Context
The bitcoin kernel library currently relies on code containing user configurations through the `ArgsManager`. This is not optimal, since as a stand-alone library it should not rely on bitcoind's argument parsing logic. Instead, its interfaces should accept control and options structs that control the kernel library's desired configuration.
Similar work towards decoupling the `ArgsManager` from the kernel has been done in
https://github.com/bitcoin/bitcoin/pull/25290, https://github.com/bitcoin/bitcoin/pull/25487, https://github.com/bitcoin/bitcoin/pull/25527 and https://github.com/bitcoin/bitcoin/pull/25862.
#### Changes
By moving the `CChainParams` class definition into the kernel and giving it new factory functions `CChainParams::{RegTest,SigNet,Main,TestNet}`it can be constructed without an `ArgsManager` reference, unlike the current factory function `CreateChainParams`.
The first few commits remove uses of `ArgsManager` within `CChainParams`. Then the `CChainParams` definition is moved to a new file in the `kernel/` subdirectory.
ACKs for top commit:
MarcoFalke:
re-ACK b3e78dc91d🛁
ryanofsky:
Code review ACK b3e78dc91d. Only changes since last review were recent review suggestions.
ajtowns:
ACK b3e78dc91d
Tree-SHA512: 3835aca1d3e3c75cc3303dd584bab3a77e58f6c678724a5e359fe4b0e17e0763a00931ee6191f516b9fde50496f59cc691f0709c0254206db3863bbf7ab2cacd
Moves chainparams code not using the ArgsManager to the kernel.
Subsequently use the kernel chainparams header now where possible in
order to further decouple chainparams call sites from gArgs.
fa1b4e5c32 Use steady clock in FlushStateToDisk (MarcoFalke)
1111e2f8b4 Use steady clock in SeedStrengthen and FindBestImplementation (MarcoFalke)
Pull request description:
There may be a theoretical deadlock for the duration of the offset when the system clock is adjusted into a past time while executing `SeedStrengthen`.
Fix this by using steady clock.
Do the same in `FindBestImplementation`, which shouldn't be affected, because it discards outlier measurements. However, doing the same there for consistency seems fine.
Do the same in `FlushStateToDisk`, which should make the flushes more steady, if the system clock is adjusted by a large offset.
ACKs for top commit:
john-moffett:
ACK fa1b4e5c32
willcl-ark:
ACK fa1b4e5c3
Tree-SHA512: cc625e796b186accd53222bd64eb57d0512bc7e588312d254349b542bbc5e5daac348ff2b3b3f7dc5ae0bbbae2ec11fdbf3022cf2164211633765a4b0108e83e
2b373fe49d docs: update assumeutxo.md (James O'Beirne)
87a1108c81 test: add snapshot completion unittests (James O'Beirne)
d70919a88f refactor: make MempoolMutex() public (James O'Beirne)
7300ced9de log: add LoadBlockIndex() message for assumedvalid blocks (James O'Beirne)
d96c59cc5c validation: add ChainMan logic for completing UTXO snapshot validation (James O'Beirne)
f2a4f3376f move-only-ish: init: factor out chainstate initialization (James O'Beirne)
637a90b973 add Chainstate::HasCoinsViews() (James O'Beirne)
c29f26b47b validation: add CChainState::m_disabled and ChainMan::isUsable (James O'Beirne)
5ee22cdafd add ChainstateManager.GetSnapshot{BaseHeight,BaseBlock}() (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11) (parent PR: https://github.com/bitcoin/bitcoin/pull/15606)
Part two of replacing https://github.com/bitcoin/bitcoin/pull/24232.
---
When a user activates a snapshot, the serialized UTXO set data is used to create an "assumed-valid" chainstate, which becomes active in an attempt to get the node to network tip as quickly as possible. Simultaneously in the background, the already-existing chainstate continues "conventional" IBD to both accumulate full block data and serve as a belt-and-suspenders to validate the assumed-valid chainstate.
Once the background chainstate's tip reaches the base block of the snapshot used, we set `m_stop_use` on that chainstate and immediately take the hash of its UTXO set; we verify that this matches the assumeutxo value in the source code. Note that while we ultimately want to remove this background chainstate, we don't do so until the following initialization process, when we again check the UTXO set hash of the background chainstate, and if it continues to match, we remove the (now unnecessary) background chainstate, and move the (previously) assumed-valid chainstate into its place. We then reinitialize the chainstate in the normal way.
As noted in previous comments, we could do the filesystem operations "inline" immediately when the background validation completes, but that's basically just an optimization that saves disk space until the next restart. It didn't strike me as worth the risk of moving chainstate data around on disk during runtime of the node, though maybe my concerns are overblown.
The final result of this completion process is a fully-validated chain, where the only evidence that the user synced using assumeutxo is the existence of a `base_blockhash` file in the `chainstate` directory.
ACKs for top commit:
achow101:
ACK 2b373fe49d
Tree-SHA512: a204e1d6e6932dd83c799af3606b01a9faf893f04e9ee1a36d63f2f1ccfa9118bdc1c107d86976aa0312814267e6a42074bf3e2bf1dead4b2513efc6d955e13d
Trigger completion when a background validation chainstate reaches the
same height as a UTXO snapshot, and handle cleaning up the chainstate
on subsequent startup.
75db62ba4c refactor: Move calculation logic out from `CheckSequenceLocksAtTip()` (Hennadii Stepanov)
3bc434f459 refactor: Add `CalculateLockPointsAtTip()` function (Hennadii Stepanov)
Pull request description:
This PR is follow up for bitcoin/bitcoin#22677 and bitcoin/bitcoin#23683.
On master (013daed9ac) it is not obvious that `CheckSequenceLocksAtTip()` function can modify its `LockPoints* lp` parameter which leads to https://github.com/bitcoin/bitcoin/pull/22677#discussion_r762040101.
This PR:
- separates the lockpoint calculate logic from `CheckSequenceLocksAtTip()` function into a new `CalculateLockPointsAtTip()` one
- cleans up the `CheckSequenceLocksAtTip()` function interface
- makes code easier to reason about (hopefully)
ACKs for top commit:
achow101:
ACK 75db62ba4c
stickies-v:
re-ACK 75db62b
Tree-SHA512: 072c3fd9cd1e1b0e0bfc8960a67b01c80a9f16d6778f374b6944ade03a020415ce8b8ab2593b0f5e787059c8cf90af798290b4c826785d41955092f6e12e7486
0af16e7134 doc: add release note for #25574 (Martin Zumsande)
57ef2a4812 validation: report if pruning prevents completion of verification (Martin Zumsande)
0c7785bb25 init, validation: Improve handling if VerifyDB() fails due to insufficient dbcache (Martin Zumsande)
d6f781f1cf validation: return VerifyDBResult::INTERRUPTED if verification was interrupted (Martin Zumsande)
6360b5302d validation: Change return value of VerifyDB to enum type (Martin Zumsande)
Pull request description:
`VerifyDB()` can fail to complete due to insufficient dbcache at the level 3 checks. This PR improves the error handling in this case in the following ways:
- The rpc `-verifychain` now returns false if the check can't be completed due to insufficient cache
- During init, we only log a warning if the default values for `-checkblocks` and `-checklevel` are taken and the check doesn't complete. However, if the user actively specifies one of these args, we return with an InitError if we can't complete the check.
This PR also changes `-verifychain` RPC to return `false` if the verification didn't finish due to missing block data (pruning) or due to being interrupted by the node being shutdown.
Previously, this PR also included a fix for a possible assert during verification - this was done in #27009 (now merged).
ACKs for top commit:
achow101:
ACK 0af16e7134
ryanofsky:
Code review ACK 0af16e7134. Only small suggested changes since the last review, like renaming some of the enum values. I did leave more suggestions, but they are not very important and could be followups
john-moffett:
ACK 0af16e7134
MarcoFalke:
lgtm re-ACK 0af16e7134 🎚
Tree-SHA512: 84b4f767cf9bfbafef362312757c9bf765b41ae3977f4ece840e40c52a2266b1457832df0cdf70440be0aac2168d9b58fc817238630b0b6812f3836ca950bc0e
and remove m_snapshot_validated. This state can now be inferred by the
number of isUsable chainstates.
m_disabled is used to signal that a chainstate should no longer be used
by validation logic; it is used as a sentinel when background validation
completes or if the snapshot chainstate is found to be invalid.
isUsable is a convenience method that incorporates m_disabled.
The rpc command verifychain now fails if the dbcache was not sufficient
to complete the verification at the specified level and depth.
In the same situation, the VerifyDB check during Init will now fail (and lead to
an early shutdown) if the user has explicitly specified -checkblocks or
-checklevel but the check couldn't be executed because of the limited
cache. If the user didn't change any of the two and is using the defaults, log a warning
but don't prevent the node from starting up.
This does not change behavior. It is in preparation for
special handling of the case where VerifyDB doesn't finish
for various reasons, but doesn't fail.
Add CoinsViewOptions struct to remove ArgsManager uses from txdb.
To reduce size of this commit, this moves references to gArgs variable out of
txdb.cpp to calling code in validation.cpp. But these moves are temporary. The
gArgs references in validation.cpp are moved out to calling code in init.cpp in
later commits.
This commit does not change behavior.
282019cd3d refactor: add kernel/cs_main.* (fanquake)
Pull request description:
One place to find / include `cs_main`.
No more:
> // Actually declared in validation.cpp; can't include because of circular dependency.
> extern RecursiveMutex cs_main;
Ultimately, no more need to include `validation.h` (which also includes (heavy/boost filled) `txmempool.h`) everywhere for `cs_main`. See #26087 for another example of why that is useful.
ACKs for top commit:
ajtowns:
ACK 282019cd3d
Tree-SHA512: 142835b794873e7a09c3246d6101843ae81ec0c6295e6873130c98a2abfa5f7282748d0f1a37237a779cc71c3bc0a75d03b20313ef5398c83d4814215cbc8287
This value creates an extremely confusing interface as its existence is
dependent upon implementation details (whether something was submitted
on its own, etc). MempoolAcceptResult::m_effective_feerate is much more
helpful, as it always exists for submitted transactions.
07dfbb5bb8 Make static nLastFlush and nLastWrite Chainstate members (Aurèle Oulès)
Pull request description:
Fixes #22189.
The `static std::multimap<uint256, FlatFilePos> mapBlocksUnknownParent; ` referenced in the issue was already fixed by #25571. I don't believe Chainstate references any other static variables.
ACKs for top commit:
jamesob:
ACK 07dfbb5bb8 ([`jamesob/ackr/26513.1.aureleoules.make_static_nlastflush_a`](https://github.com/jamesob/bitcoin/tree/ackr/26513.1.aureleoules.make_static_nlastflush_a))
theStack:
Concept and code-review ACK 07dfbb5bb8
Tree-SHA512: 0f26463c079bbc5e0e62707d4ca4c8c9bbb99edfa3391d48d4915d24e2a1190873ecd4f9f11da25b44527671cdc82c41fd8234d56a4592a246989448d34406b0
d885bb2f6e test: Test exclusion of OP_RETURN from getblockstats (Fabian Jahr)
ba9d288b24 test: Fix getblockstats test data generator (Fabian Jahr)
2ca5a496c2 rpc: Improve getblockstats (Fabian Jahr)
cb94db119f validation, index: Add unspendable coinbase helper functions (Fabian Jahr)
Pull request description:
Fixes #19885
The genesis block does not have undo data saved to disk so the RPC errored because of that.
ACKs for top commit:
achow101:
ACK d885bb2f6e
aureleoules:
ACK d885bb2f6e
stickies-v:
ACK d885bb2f6
Tree-SHA512: f37bda736ed605b7a41a81eeb4bfbb5d2b8518f847819e5d6a090548a61caf1455623e15165d72589ab3f4478252b00e7b624f9313ad6708cac06dd5edb62e9a
aaaa7bd0ba iwyu: Add missing includes (MacroFake)
fa9ebec096 Remove g_parallel_script_checks (MacroFake)
fa7c834b9f Move ::fCheckBlockIndex into ChainstateManager (MacroFake)
fa43188d86 Move ::fCheckpointsEnabled into ChainstateManager (MacroFake)
cccca83099 Move ::nMinimumChainWork into ChainstateManager (MacroFake)
fa29d0b57c Move ::hashAssumeValid into ChainstateManager (MacroFake)
faf44876db Move ::nMaxTipAge into ChainstateManager (MacroFake)
Pull request description:
It seems preferable to assign globals to a class (in this case `ChainstateManager`), than to leave them dangling. This should clarify scope for code-readers, as well as clarifying unit test behaviour.
ACKs for top commit:
dergoegge:
Code review ACK aaaa7bd0ba
ryanofsky:
Code review ACK aaaa7bd0ba. No changes since last review, other than rebase
aureleoules:
reACK aaaa7bd0ba
Tree-SHA512: 83ec3ba0fb4f1dad95810d4bd4e578454e0718dc1bdd3a794cc4e48aa819b6f5dad4ac4edab3719bdfd5f89cbe23c2740a50fd56c1ff81c99e521c5f6d4e898d
Making the checks to identify BIP30 available outside of validation.cpp is needed for reporting and tracking statistics on specific blocks and the UTXO set correctly.
5d3f98d278 refactor: Replace m_params with chainman.GetParams() (Aurèle Oulès)
Pull request description:
Fixes a TODO introduced in #24595.
Removes `m_params` from `CChainState` class and replaces it with `m_chainman.GetParams()`.
ACKs for top commit:
MarcoFalke:
review ACK 5d3f98d278🌎
Tree-SHA512: de0fe31450d281cc7307c0d820495e86c93c7998e77a148db2c703da66cff1059e6560c041f1864913c42075aa24d259c2623d45e929ca0a8056ed330a9f9978
This changes the flag for the bitcoin-chainstate executable. Previously
it was false, now it is the chain's default value (still false for the
main chain).
This changes the minimum chain work for the bitcoin-chainstate
executable. Previously it was uint256{}, now it is the chain's default
minimum chain work.
bf95976061 doc: add note about snapshot chainstate init (James O'Beirne)
e4d7995286 test: add testcases for snapshot initialization (James O'Beirne)
cced4e7336 test: move-only-ish: factor out LoadVerifyActivateChainstate() (James O'Beirne)
51fc9241c0 test: allow on-disk coins and block tree dbs in tests (James O'Beirne)
3c361391b8 test: add reset_chainstate parameter for snapshot unittests (James O'Beirne)
00b357c215 validation: add ResetChainstates() (James O'Beirne)
3a29dfbfb2 move-only: test: make snapshot chainstate setup reusable (James O'Beirne)
8153bd9247 blockmanager: avoid undefined behavior during FlushBlockFile (James O'Beirne)
ad67ff377c validation: remove snapshot datadirs upon validation failure (James O'Beirne)
34d1590331 add utilities for deleting on-disk leveldb data (James O'Beirne)
252abd1e8b init: add utxo snapshot detection (James O'Beirne)
f9f1735f13 validation: rename snapshot chainstate dir (James O'Beirne)
d14bebf100 db: add StoragePath to CDBWrapper/CCoinsViewDB (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11) (parent PR: https://github.com/bitcoin/bitcoin/pull/15606)
---
Half of the replacement for #24232. The original PR grew larger than expected throughout the review process.
This change adds the ability to initialize a snapshot-based chainstate during init if one is detected on disk. This is of course unused as of now (aside from in unittests) given that we haven't yet enabled actually loading snapshots.
Don't be scared! There are some big move-only commits in here.
Accompanying changes include:
- moving the snapshot coinsdb directory from being called `chainstate_[base blockhash]` to `chainstate_snapshot`, since we only support one snapshot in use at a time. This simplifies some logic, but it necessitates writing that base blockhash out to a file within the coinsdb dir. See [discussion here](https://github.com/bitcoin/bitcoin/pull/24232#discussion_r832762880).
- adding a simple fix in `FlushBlockFile()` that avoids a crash when attemping to flush to disk before `LoadBlockIndexDB()` is called, which happens when calling `MaybeRebalanceCaches()` during multiple chainstate init.
- improving the unittest to allow testing with on-disk chainstates - necessary to test a simulated restart and re-initialization.
ACKs for top commit:
naumenkogs:
utACK bf95976061
ariard:
Code Review ACK bf9597606
ryanofsky:
Code review ACK bf95976061. Changes since last review: rebasing, switching from CAutoFile to AutoFile, adding comments, switching from BOOST_CHECK to Assert in test util, using chainman.GetMutex() in tests, destroying one ChainstateManager before creating a new one in tests
fjahr:
utACK bf95976061
aureleoules:
ACK bf95976061
Tree-SHA512: 15ae75caf19f8d12a12d2647c52897904d27b265a7af6b4ae7b858592eeadb8f9da6c2394b6baebec90adc28742c053e3eb506119577dae7c1e722ebb3b7bcc0
Add functionality for activating a snapshot-based chainstate if one is
detected on-disk.
Also cautiously initialize chainstate cache usages so that we don't
somehow blow past our cache allowances during initialization, then
rebalance at the end of init.
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
