This removes the need to actually track misbehavior score (see further commit), because any
Misbehaving node will immediately hit the discouragement threshold.
With the Misbehavior score gone for non-connecting headers (see previous
commit), there is no need to only treat headers messages with up to 8
headers as potential BIP130 announcements. BIP130 does not specify such
a limit; it was purely a heuristic.
This misbehavior was originally intended to prevent bandwidth wastage due to
actually observed very broken (but likely non-malicious) nodes that respond
to GETHEADERS with a response unrelated to the request, triggering a request
cycle.
This has however largely been addressed by the previous commit, which causes
non-connecting HEADERS that are received while a GETHEADERS has not been
responded to, to be ignored, as long as they do not time out (2 minutes).
With that, the specific misbehavior is largely irrelevant (for inbound peers,
it is now harmless; for outbound peers, the eviction logic will eventually
kick them out if they're not keeping up with headers at all).
Since https://github.com/bitcoin/bitcoin/pull/25454 we keep track of the last
GETHEADERS request that was sent and wasn't responded to. So far, every incoming
HEADERS message is treated as a response to whatever GETHEADERS was last sent,
regardless of its contents.
This commit makes this tracking more accurate, by only treating HEADERS messages
which (1) are empty, (2) connect to our existing block header tree, or (3) are a
continuation of a low-work headers sync as responses that clear the "outstanding
GETHEADERS" state (m_last_getheaders_timestamp).
That means that HEADERS messages which do not satisfy any of the above criteria
will be ignored, not triggering a GETHEADERS, and potentially (for now, but see
later commit) increase misbehavior score.
5deb0b024e build, test, doc: Temporarily remove Android-related stuff (Hennadii Stepanov)
Pull request description:
Previously, our Android builds were geared towards generating APKs, which relied on Qt. However, after migrating to C++20, compiling for Android became unfeasible due to Qt 5.15's compatibility limitations with NDK only up to r25, which includes an outdated embedded libc++ (see https://github.com/bitcoin/bitcoin/issues/29360).
All removed stuff will be reinstated after migrating the build system to CMake and upgrading Qt to version 6.x.
This PR makes possible a clean migration to the CMake-based build system as it removes code, which is not used at this moment.
ACKs for top commit:
vasild:
ACK 5deb0b024e
fanquake:
ACK 5deb0b024e - given none of this is currently tested/wont compile. Can be revisted in future.
Tree-SHA512: 3bc2ccfe881e11cc1d78c27acd6f1d86cfba86821ef3bb5eca2e80d978fdfa13659ec82284dcaadc507e2394524dea91d4b8f81d0030c1cef9708df8be76bf07
7c8abf3c20 bench: bugfix, properly release wallet before erasing directory (furszy)
Pull request description:
Simple fix for #29816.
Since the wallet is appended to the global `WalletContext` during
creation, merely calling `reset()` on the benchmark shared_pointer
is insufficient to destruct the wallet. This no destruction of the
wallet object results in keeping the db connection open, which
was causes the `fs::remove_all()` failure on Windows.
ACKs for top commit:
maflcko:
utACK 7c8abf3c20
kevkevinpal:
utACK [7c8abf3](7c8abf3c20)
hebasto:
re-ACK 7c8abf3c20, I agree with changes since my recent [review](https://github.com/bitcoin/bitcoin/pull/30122#pullrequestreview-2061694682).
Tree-SHA512: 279df65bea8f7aa02af0a2efed62dca9bf9b29cb748eb369c602d223e08a8a907dea7b1bffbd3dab91b1656c1d91b18a9a0534bc3f153bd751414b0e6230b3a4
9ddf39dd87 fuzz: Handle missing BDBRO errors (Ava Chow)
Pull request description:
Adds error messages that were not being handled. Also removes error messages that no longer exist.
Fixes #30166
ACKs for top commit:
dergoegge:
reACK 9ddf39dd87
TheCharlatan:
ACK 9ddf39dd87
Tree-SHA512: 2597536a1e5d030653dfcb02fd892f7492f5a091def787f6cbd421b8bca9544847684a498e9458ea99ae7de5a8a6d91532ff904d1e39222d324939d31d2eb3f0
949abebea0 [fuzz] Avoid collecting initialization coverage (dergoegge)
Pull request description:
Our coverage reports include coverage of initialization code, which can be misleading when trying to evaluate the coverage a fuzz harness achieves through fuzzing alone.
This PR proposes to make fuzz coverage reports more accurate by resetting coverage counters after initialization code has been run. This makes it easier to evaluate which code was actually reached through fuzzing (e.g. to spot fuzz blockers).
ACKs for top commit:
maflcko:
utACK 949abebea0
brunoerg:
nice, utACK 949abebea0
Tree-SHA512: c8579bda4f3d71d199b9331fbe6316fce375a906743d0bc216bb94958dc03fdc9a951ea50cfeb487494a75668ae3c16471a82f7e5fdd912d781dc29d063e2c5b
fa6d4891c7 refactor: Use type-safe time in txorphanage (MarcoFalke)
Pull request description:
This allows to remove manual conversions like multiplication by `60`, and uses a type-safe type instead of a raw `int64_t`.
ACKs for top commit:
epiccurious:
utACK fa6d4891c7.
dergoegge:
Code review ACK fa6d4891c7
brunoerg:
utACK fa6d4891c7
Tree-SHA512: c187d0e579b1131afcef8c901f5662c18ab867fa2a99fbb13b67bb1e10b2047128194bfef8329cde0d51e1c35d6227ae292b823968f37ea9422975e46e01846a
Both `GetSelectionWaste()` and `ComputeAndSetWaste()` now are part of
`SelectionResult`. Instead of `ComputeAndSetWaste()` being a wrapper for
`GetSelectionWaste()`, we combine them to a new function
`RecalculateWaste()`.
As I was combining the logic of the two functions, I noticed that
`GetSelectionWaste()` was making the odd assumption that the
`change_cost` being set to zero means that no change is created.
However, if we build transactions at a feerate of zero with the
`discard_feerate` also set to zero, we'd organically have a
`change_cost` of zero, even when we create change on a transaction.
This commit cleans up this duplicate meaning of `change_cost` and relies
on `GetChange()` to figure out whether there is change on basis of the
`min_viable_change` and whatever is left after deducting fees.
Since this broke a bunch of tests that relied on the double-meaning of
`change_cost` a bunch of tests had to be fixed.
fac7298529 fuzz: Fix wallet_bdb_parser stdlib error matching (MarcoFalke)
Pull request description:
The stdlib error string is an implementation detail and can not be relied upon.
Ref: `libc++abi: terminating due to uncaught exception of type std::runtime_error: AutoFile::read: end of file: unspecified iostream_category error`
ACKs for top commit:
achow101:
ACK fac7298529
Tree-SHA512: 588acc71a05d97855d6bb65380411e8486692536434eadee7697de09f80b128ff2f90a31fd0e8384d084b554d2f3978efd076082e070e721cf05b07c94cc83b1
2fd34ba504 Add sanity checks for various ATMPArgs booleans (Greg Sanders)
20d8936d8b [refactor] make some members MemPoolAccept-wide (glozow)
cbbfe719b2 cpfp carveout is excluded in packages (glozow)
69f7ab05ba Add m_allow_sibling_eviction as separate ATMPArgs flag (Greg Sanders)
57ee3029dd Add description for m_test_accept (Greg Sanders)
Pull request description:
First few commits of https://github.com/bitcoin/bitcoin/pull/28984 to set the stage for the package RBF logic.
These refactors are preparation for evaluating an RBF in a multi-proposed-transaction context instead of only a single proposed transaction. Also, carveouts and sibling evictions only should work in single RBF cases so add logic to preclude multi-tx cases in the future.
No behavior changes aside from bailing earlier from failed carve-outs.
ACKs for top commit:
glozow:
reACK 2fd34ba504 via range-diff
sr-gi:
utACK [2fd34ba](2fd34ba504)
theStack:
re-ACK 2fd34ba504
Tree-SHA512: 5071c5b8d9b8d2c9faa278c8c4df31de288cb407a68e4d55544c588caff6c86160cce7825453549c6ed69e29d9ccb5ee2d4a518b18f563bfb12f2ced073fe42a
542e13b293 rpc: Enhance metadata of the dumptxoutset output (Fabian Jahr)
4d8e5edbaa assumeutxo: Add documentation on dumptxoutset serialization format (Fabian Jahr)
c14ed7f384 assumeutxo: Add test for changed coin size value (Fabian Jahr)
de95953d87 rpc: Optimize serialization disk space of dumptxoutset (Fabian Jahr)
Pull request description:
The second attempt at implementing the `dumptxoutset` space optimization as suggested in #25675. Closes #25675.
This builds on the work done in #26045, addresses open feedback, adds some further improvements (most importantly usage of compact size), documentation, and an additional test.
The [original snapshot at height 830,000](https://github.com/bitcoin/bitcoin/pull/29551) came in at 10.82 GB. With this change, the same snapshot is 8.94 GB, a reduction of 17.4%.
This also enhances the metadata of the output file and adds the following data to allow for better error handling and make future upgrades easier:
- A newly introduced utxo set magic
- A version number
- The network magic
- The block height
ACKs for top commit:
achow101:
ACK 542e13b293
TheCharlatan:
Re-ACK 542e13b293
theStack:
ACK 542e13b293
Tree-SHA512: 0825d30e5c3c364062db3c6cbca4e3c680e6e6d3e259fa70c0c2b2a7020f24a47406a623582040988d5c7745b08649c31110df4c10656aa25f3f27eb35843d99
84900ac34f doc: add release-notes-27064.md (Matthew Zipkin)
855dd8d592 system: use %LOCALAPPDATA% as default datadir on windows (Matthew Zipkin)
Pull request description:
Closes https://github.com/bitcoin/bitcoin/issues/2391
This PR changes the default datadir location on Windows from `C:\Users\Username\AppData\Roaming\Bitcoin` to `C:\Users\Username\AppData\Local\Bitcoin`. This change only applies to fresh installs. To preserve backwards compatibility, on startup we check for the existence of `C:\Users\Username\AppData\Roaming\Bitcoin\chainstate` and if it is there, we continue using the "Roaming" directory as the default datadir location.
[Note that in Windows 11 this change may be moot:](https://learn.microsoft.com/en-us/uwp/api/windows.storage.applicationdata.roamingfolder?view=winrt-22621)
> Roaming data and settings is no longer supported as of Windows 11. The recommended replacement is [Azure App Service](https://learn.microsoft.com/en-us/azure/app-service/). Azure App Service is widely supported, well documented, reliable, and supports cross-platform/cross-ecosystem scenarios such as iOS, Android and web. Settings stored here no longer roam (as of Windows 11), but the settings store is still available.
ACKs for top commit:
achow101:
ACK 84900ac34f
BenWestgate:
crACK 84900ac34f
hebasto:
re-ACK 84900ac34f, only addressed feedback since my recent [review](https://github.com/bitcoin/bitcoin/pull/27064#pullrequestreview-2028718273).
Tree-SHA512: 807c6e89571287e2c8f4934229aec91ef28e7d0a675234acf1b7d085c24c7b73a08b6e345fbfc9038e6239187b6b69c08490ddaa1c057de5ea975c4a000bba42
No change in behavior.
For single transaction acceptance, this is a simple refactor:
Workspace::m_all_conflicting
Workspace::m_conflicting_fees
Workspace::m_conflicting_size
Workspace::m_replaced_transactions
are now grouped under a new SubPackageState struct that is
a member of MemPoolAccept.
And local variables m_total_vsize and m_total_modified_fees are now
SubpackageState members so they can be accessed from
PackageMempoolChecks.
We want these to be package-wide variables because
- Transactions could conflict with the same tx (just not the same
prevout), or their conflicts could share descendants.
- We want to compare conflicts with the package fee rather than
individual transaction fee.
We reset these MemPoolAccept-wide fields for each subpackage
evaluation to not cause state leaking, similar to temporary
coins.
The behavior is not new, but this rule exits earlier than before.
Previously, a carve out could have been granted in PreChecks() but then
nullified in PackageMempoolChecks() when CheckPackageLimits() is called
with the default limits.
154b2b2296 [fuzz] V3_MAX_VSIZE and effective ancestor/descendant size limits (glozow)
a29f1df289 [policy] restrict all v3 transactions to 10kvB (glozow)
d578e2e354 [policy] explicitly require non-v3 for CPFP carve out (glozow)
Pull request description:
Opening for discussion / conceptual review.
We like the idea of a smaller maximum transaction size because:
- It lowers potential replacement cost (i.e. harder to do Rule 3 pinning via gigantic transaction)
- They are easier to bin-pack in block template production
- They equate to a tighter memory limit in data structures that are bounded by a number of transactions (e.g. orphanage and vExtraTxnForCompact). For example, the current memory bounds for orphanage is 100KvB * 100 = 40MB, and guaranteeing 1 tx per peer would require reserving a pretty large space.
History for `MAX_STANDARD_TX_WEIGHT=100KvB` (copied from https://github.com/bitcoin/bitcoin/pull/29873#issuecomment-2115459510):
- 2010-09-13 In 3df62878c3 satoshi added a 100kB (MAX_BLOCK_SIZE_GEN/5 with MBS_GEN = MAX_BLOCK_SIZE/2) limit on new transactions in CreateTransaction()
- 2013-02-04 https://github.com/bitcoin/bitcoin/pull/2273 In gavin gave that constant a name, and made it apply to transaction relay as well
Lowering `MAX_STANDARD_TX_WEIGHT` for all txns is not being proposed, as there are existing apps/protocols that rely on large transactions. However, it's been brought up that we should consider this for TRUCs (which is especially designed to avoid Rule 3 pinning).
This reduction should be ok because using nVersion=3 isn't standard yet, so this wouldn't break somebody's existing use case. If we find that this is too small, we can always increase it later. Decreasing would be much more difficult.
~[Expected size of a commitment transaction](https://github.com/lightning/bolts/blob/master/03-transactions.md#expected-weight-of-the-commitment-transaction) is within (900 + 172 * 483 + 224) / 4 = 21050vB~ EDIT: this is incorrect, but perhaps not something that should affect how we choose this number.
ACKs for top commit:
sdaftuar:
ACK 154b2b2296
achow101:
ACK 154b2b2296
instagibbs:
ACK 154b2b2296
t-bast:
ACK 154b2b2296
murchandamus:
crACK 154b2b2296
Tree-SHA512: 89392a460908a8ea9f547d90e00f5181de0eaa9d2c4f2766140a91294ade3229b3d181833cad9afc93a0d0e8c4b96ee2f5aeda7c50ad7e6f3a8320b9e0c5ae97
d7707d9843 rpc: avoid copying into UniValue (Cory Fields)
Pull request description:
These are the simple (and hopefully obviously correct) copies that can be moves instead.
This is a follow-up from https://github.com/bitcoin/bitcoin/pull/30094#issuecomment-2108751842
As it turns out, there are hundreds of places where we copy UniValues needlessly. It should be the case that moves are always preferred over copies, so there should be no downside to these changes.
willcl-ark, however, noticed that memory usage may increase in some cases. Logically this makes no sense to me. The only plausible explanation imo is that because the moves are faster, more ops/second occur in some cases.
This list of moves was obtained by changing the function signatures of the UniValue functions to accept only rvalues, then compiling and fixing them up one by one. There still exist many places where copies are being made. These can/should be fixed up, but weren't done here for the sake of doing the easy ones first.
I ran these changes through clang-tidy with `performance-move-const-arg` and `bugprone-use-after-move` and no bugs were detected (though that's obviously not to say it can be trusted 100%).
As stated above, there are still lots of other less trivial fixups to do after these including:
- Using non-const UniValues where possible so that moves can happen
- Refactoring code in order to be able to move a UniValue without introducing a use-after-move
- Refactoring functions to accept UniValues by value rather than by const reference
ACKs for top commit:
achow101:
ACK d7707d9843
ryanofsky:
Code review ACK d7707d9843. No changes since last review other than rebase. I agree benchmarks showing increased peak memory usage and RSS are surprising, but number of allocations is down as expected, and runtime is also decreased.
willcl-ark:
ACK d7707d9843
Tree-SHA512: 7f511be73984553c278186286a7d161a34b2574c7f5f1a0edc87c2913b4c025a0af5241ef9af2df17547f2e4ef79710aa5bbb762fc9472435781c0488dba3435
1e54d61c46 test: add coverage for `mapped_as` from `getrawaddrman` (brunoerg)
8c2714907d net: rpc: return peer's mapped AS in getrawaddrman (brunoerg)
Pull request description:
This PR adds two new fields in `getrawaddrman` RPC: "mapped_as" and "source_mapped_as". These fields are used to return the ASN (Autonomous System Number) mapped to the peer and its source. With these informations we can have a better view of the bucketing logic with ASMap specially in projects like [addrman-observer](https://github.com/0xb10c/addrman-observer).
ACKs for top commit:
fjahr:
Code review ACK 1e54d61c46
virtu:
ACK [1e54d61](1e54d61c46)
0xB10C:
ACK 1e54d61c46
glozow:
ACK 1e54d61c46
Tree-SHA512: af86bcc7a2e69bebd3fa9eaa2e527e0758c44c0a958de7292514d5f99f8f01f5df3bae11400451268e0255f738ff3acccc77f48fe129937512f1e9d9963c4c5e
a057869aa3 build: pass --with-ecmult-gen-kb=86 to secp256k1 (fanquake)
ca3d945dc6 Squashed 'src/secp256k1/' changes from d8311688bd..06bff6dec8 (fanquake)
Pull request description:
This includes changes from the 0.5.0 release: https://github.com/bitcoin-core/secp256k1/releases/tag/v0.5.0
> New function secp256k1_ec_pubkey_sort that sorts public keys using lexicographic (of compressed serialization) order.
> The implementation of the point multiplication algorithm used for signing and public key generation was changed, resulting in improved performance for those operations.
> The related configure option --ecmult-gen-precision was replaced with --ecmult-gen-kb (ECMULT_GEN_KB for CMake).
> This changes the supported precomputed table sizes for these operations. The new supported sizes are 2 KiB, 22 KiB, or 86 KiB (while the old supported sizes were 32 KiB, 64 KiB, or 512 KiB).
ACKs for top commit:
hebasto:
ACK a057869aa3, I've got a zero diff with my local branch, which reproduces the subtree update, and `ecmult gen table size = 86 KiB` in the configure summary.
jonasnick:
utACK a057869aa3
Tree-SHA512: 907012b0d7e0a6bd68b245c238e968f2318d8ac5de5ec9070245de8391c996eb5ec6428184d028f6f0f54d3b2f5a8292ad7081177e1c331397879505436dc38e
b3efb48673 protocol: make message types constexpr (Vasil Dimov)
2fa9de06c2 net: make the list of known message types a compile time constant (Vasil Dimov)
Pull request description:
Turn the `std::vector` to `std::array` because it is cheaper and allows us to have the number of the messages as a compile time constant: `ALL_NET_MESSAGE_TYPES.size()` which can be used in future code to build other `std::array`s with that size.
---
This change is part of https://github.com/bitcoin/bitcoin/pull/29418 but it makes sense on its own and would be good to have it, regardless of the fate of https://github.com/bitcoin/bitcoin/pull/29418. Also, if this is merged, that would reduce the size of https://github.com/bitcoin/bitcoin/pull/29418, thus the current standalone PR.
ACKs for top commit:
achow101:
ACK b3efb48673
jonatack:
ACK b3efb48673
maflcko:
utACK b3efb48673🎊
willcl-ark:
ACK b3efb48673
Tree-SHA512: 6d3860c138c64514ebab13d97ea67893e2d346dfac30a48c3d9bc769a1970407375ea4170afdb522411ced306a14a9af4eede99e964d1fb1ea3efff5d5eb57af
This carve out is intended to allow a second child under restricted
circumstances, but this topology is not allowed for v3 transactions.
As CPFP carve out does not explicitly require a second child to actually
exist, it has the effect of granting a free +10KvB descendant size limit
when a single child is enough to bust the descendant limit.
d35ba1b3f1 util: avoid using thread_local variable that has a destructor (Vasil Dimov)
Pull request description:
Store the thread name in a `thread_local` variable of type `char[]` instead of `std::string`. This avoids calling the destructor when the thread exits. This is a workaround for
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=278701
For type-safety, return `std::string` from
`util::ThreadGetInternalName()` instead of `char[]`.
As a side effect of this change, we no longer store a reference to a `thread_local` variable in `CLockLocation`. This was dangerous because if the thread quits while the reference still exists (in the global variable `lock_data`, see inside `GetLockData()`) then the reference will become dangling.
ACKs for top commit:
laanwj:
Code review ACK d35ba1b3f1
hebasto:
re-ACK d35ba1b3f1.
theuni:
utACK d35ba1b3f1
Tree-SHA512: a2a3bc4401654d6e99db5b9c46a7051855f5a26886142298662e681b78dd581ff4c6bebe42f649b8e1fb8a78d569c6117302db2cd6362e884a22f2a5839b7d43
d51fbab4b3 wallet, test: Be able to always swap BDB endianness (Ava Chow)
0b753156ce test: Test bdb_ro dump of wallet without reset LSNs (Ava Chow)
c1984f1282 test: Test dumping dbs with overflow pages (Ava Chow)
fd7b16e391 test: Test dumps of other endian BDB files (Ava Chow)
6ace3e953f bdb: Be able to make byteswapped databases (Ava Chow)
d9878903fb Error if LSNs are not reset (Ava Chow)
4d7a3ae78e Berkeley RO Database fuzz test (TheCharlatan)
3568dce9e9 tests: Add BerkeleyRO to db prefix tests (Ava Chow)
70cfbfdadf wallettool: Optionally use BERKELEY_RO as format when dumping BDB wallets (Ava Chow)
dd57713f6e Add MakeBerkeleyRODatabase (Ava Chow)
6e50bee67d Implement handling of other endianness in BerkeleyRODatabase (Ava Chow)
cdd61c9cc1 wallet: implement independent BDB deserializer in BerkeleyRODatabase (Ava Chow)
ecba230979 wallet: implement BerkeleyRODatabase::Backup (Ava Chow)
0c8e728476 wallet: implement BerkeleyROBatch (Ava Chow)
756ff9b478 wallet: add dummy BerkeleyRODatabase and BerkeleyROBatch classes (Ava Chow)
ca18aea5c4 Add AutoFile::seek and tell (Ava Chow)
Pull request description:
Split from #26596
This PR adds `BerkeleyRODatabase` which is an independent implementation of a BDB file parser. It provides read only access to a BDB file, and can therefore be used as a read only database backend for wallets. This will be used for dumping legacy wallet records and migrating legacy wallets without the need for BDB itself.
Wallettool's `dump` command is changed to use `BerkeleyRODatabase` instead of `BerkeleyDatabase` (and `CWallet` itself) to demonstrate that this parser works and to test it against the existing wallettool functional tests.
ACKs for top commit:
josibake:
reACK d51fbab4b3
TheCharlatan:
Re-ACK d51fbab4b3
furszy:
reACK d51fbab4b3
laanwj:
re-ACK d51fbab4b3
theStack:
ACK d51fbab4b3
Tree-SHA512: 1e7b97edf223b2974eed2e9eac1179fc82bb6359e0a66b7d2a0c8b9fa515eae9ea036f1edf7c76cdab2e75ad994962b134b41056ccfbc33b8d54f0859e86657b
