Introduce two new options to reach the I2P network:
* `-i2psam=<ip:port>` point to the I2P SAM proxy. If this is set then
the I2P network is considered reachable and we can make outgoing
connections to I2P peers via that proxy. We listen for and accept
incoming connections from I2P peers if the below is set in addition to
`-i2psam=<ip:port>`
* `-i2pacceptincoming` if this is set together with `-i2psam=<ip:port>`
then we accept incoming I2P connections via the I2P SAM proxy.
Implement the following commands from the I2P SAM protocol:
* HELLO: needed for all of the remaining ones
* DEST GENERATE: to generate our private key and destination
* NAMING LOOKUP: to convert .i2p addresses to destinations
* SESSION CREATE: needed for STREAM CONNECT and STREAM ACCEPT
* STREAM CONNECT: to make outgoing connections
* STREAM ACCEPT: to accept incoming connections
Introduce two high level, convenience methods in the `Sock` class:
* `SendComplete()`: keep trying to send the specified data until either
successfully sent all of it, timeout or interrupted.
* `RecvUntilTerminator()`: read until a terminator is encountered (never
after it), timeout or interrupted.
These will be convenient in the I2P SAM implementation.
`SendComplete()` can also be used in the SOCKS5 implementation instead
of calling `send()` directly.
Previously `Sock::Wait()` would not have signaled to the caller whether
a timeout or one of the requested events occurred since that was not
needed by any of the callers.
Such functionality will be needed in the I2P implementation, thus extend
the `Sock::Wait()` method.
Recognize also I2P addresses in the form `base32hashofpublickey.b32.i2p`
from `CNetAddr::SetSpecial()`.
This makes `Lookup()` support them, which in turn makes it possible to
manually connect to an I2P node by using
`-proxy=i2p_socks5_proxy:port -addnode=i2p_address.b32.i2p:port`
Co-authored-by: Lucas Ontivero <lucasontivero@gmail.com>
Our local (bind) address is already saved in `CNode::addrBind` and there
is no need to re-retrieve it again with `GetBindAddress()`.
Also, for I2P connections `CNode::addrBind` would contain our I2P
address, but `GetBindAddress()` would return something like
`127.0.0.1:RANDOM_PORT`.
Isolate the second half of `CConnman::AcceptConnection()` into a new
separate method, which could be reused if we accept incoming connections
by other means than `accept()` (first half of
`CConnman::AcceptConnection()`).
Call `GetBindAddress()` earlier in `CConnman::AcceptConnection()`. That
is specific to the TCP protocol and makes the code below it reusable for
other protocols, if the caller provides `addr_bind`, retrieved by other
means.
This check is related to an `accept()` failure. So do the check earlier,
closer to the `accept()` call.
This will allow to isolate the `accept()`-specific code at the beginning
of `CConnman::AcceptConnection()` and reuse the code that follows it.
`fclose()` is flushing any buffered data to disk, so if it fails then
that could mean that the data was not completely written to disk.
Thus, check if `fclose()` succeeds and only then claim success from
`WriteBinaryFile()`.
If an error occurs and `fread()` returns `0` (nothing was read) then the
code before this patch would have returned "success" with a partially
read contents of the file.
Extract `ReadBinaryFile()` and `WriteBinaryFile()` from `torcontrol.cpp`
to its own `readwritefile.{h,cpp}` files, so that it can be reused from
other modules.
faa06ecc9c build: Bump minimum Qt version to 5.9.5 (Hennadii Stepanov)
Pull request description:
Close #20104.
ACKs for top commit:
laanwj:
Code review ACK faa06ecc9c
jarolrod:
ACK faa06ecc9c
fanquake:
ACK faa06ecc9c - this should be ok to do now.
Tree-SHA512: 7295472b5fd37ffb30f044e88c39d375a5a5187d3f2d44d4e73d0eb0c7fd923cf9949c2ddab6cddd8c5da7e375fff38112b6ea9779da4fecce6f024d05ba9c08
Collects all the orphan handling globals into a single member var in
net_processing, and ensures access is encapuslated into the interface
functions. Also adds doxygen comments for methods.
All the interesting functionality of AddOrphanTx is already in other
functions, so call those functions directly in the one place that
AddOrphanTx was used.
Rather than checking net_processing's internal implementation of
AddOrphanTx, test txorphanage's exported AddTx interface. Note that
this means AddToCompactExtraTransactions is no longer tested here.
EraseOrphansFor was called both with and without g_cs_orphans held,
correct that so that it's always called with it already held.
LimitOrphanTxSize was always called with g_cs_orphans held, so
add annotations and don't lock it a second time.
70d3c5d0b9 gui: add "Last Block" (CNodeStats::nLastBlockTime) to peer details (Jon Atack)
a21be7c401 gui: add "Last Tx" (CNodeStats::nLastTXTime) to peer details (Jon Atack)
4dc2fd6c37 qt: add RPCConsole::TimeDurationField helper, call systime only once (Jon Atack)
Pull request description:
- add `RPCConsole::TimeDurationField` helper to replace repeated code and call system time only once in `RPCConsole::updateDetailWidget`
- add "Last Tx" (`CNodeStats::nLastTXTime`) field to peer details
- add "Last Block" (`CNodeStats::nLastBlockTime`) field to peer details
ACKs for top commit:
hebasto:
re-ACK 70d3c5d0b9
Tree-SHA512: 2611b71fd358ba9ffb6a6206275c08ecb5e683b6f87d022faaaba9802a15030430113afdb434814a9ae2681d04429aa733164bc110b64337ceaae12a0420f4f1
fae216a73d scripted-diff: Rename MakeFuzzingContext to MakeNoLogFileContext (MarcoFalke)
fa4fbec03e scripted-diff: Rename PROVIDE_MAIN_FUNCTION -> PROVIDE_FUZZ_MAIN_FUNCTION (MarcoFalke)
Pull request description:
Split out two renames from #21003:
* `PROVIDE_FUZZ_MAIN_FUNCTION`. *Reason*: This in only used by fuzzing, so the name should indicate that.
* `MakeNoLogFileContext`. *Reason*: Better reflects what the helper does. Also, prepares it to be used in non-fuzz tests in the future.
ACKs for top commit:
practicalswift:
cr ACK fae216a73d: scripted-diff looks correct
Tree-SHA512: e5d347746f5da72b0c86fd4f07ac2e4b3016e88e8c97a830c73bd79d0af6d0245fe7712487fc20344d6cc25958941716c1678124a123930407e3a437265b71df
5440c07457 qt: Rename "Edit label" to "Edit address label" (Wladimir J. van der Laan)
22664d6287 Revert "qt: Remove Transactionview Edit Label Action" (Wladimir J. van der Laan)
Pull request description:
This reverts PR #211.
I disagree with this change, I use the functionality a lot, it was the primary way I used to organize and edit transactions labels and am sad to see this go.
> you can edit a sending address in the send tab Address Book
Using the address book should not be encouraged at all! A while ago it was even proposed to remove it. There's rarely need to scroll through all historical addresses used and unused. The transaction list does just fine for this.
> While all other actions apply directly to the selected transaction, the Edit Label action applies to the selected transaction's address.
**In practice** when bitcoin is used in the commonly advised way, generate a new address for each transaction, those are equivalent though.
I doubt I (and **luke-jr**) will be the only users that will stumblle on this. Further discussion here: https://github.com/bitcoin-core/gui/pull/211#issuecomment-784755998
ACKs for top commit:
hebasto:
ACK 5440c07457, verified that 22664d6287 is a clean revert of 8f9644890a.
Tree-SHA512: 3a86a730279bc454d0bd25d874dbfb6b1c0492480e66c3164e7c60d8658d622d4522de11bf8564876dc3ee056b53db71ecbe8a37281bf25d41a27e6e0d72ad8f
bb3da8fe41 qt: Disable requests context menu actions when appropriate (Jarol Rodriguez)
Pull request description:
The recent requests table will allow you to copy data points even if they do not exist. This PR implements checks to disable the `copy label`, `copy message`, and `copy amount` context menu actions if the respective fields are empty. This brings the recent requests table context menu behavior closer to the behavior seen in the transaction view.
On a payment request entry which does not have a value for label, message, or amount:
| Master | PR |
| ----------- | ----------- |
|<img width="169" alt="Screen Shot 2021-02-19 at 1 22 28 AM" src="https://user-images.githubusercontent.com/23396902/108466086-167adc00-7251-11eb-8bd6-13984042bdb3.png">| <img width="169" alt="Screen Shot 2021-02-19 at 1 21 49 AM" src="https://user-images.githubusercontent.com/23396902/108466185-3e6a3f80-7251-11eb-9dd8-492ed07fd638.png">|
`copy URI` never needs to be disabled as an entry in the recent requests table must have a URI even if it doesn't have a label, message, or amount. #213 will add a `copy address` context menu action. This also does not need a check as an entry must be associated with an address.
Below are some more examples of how this PR will behave:
**Has Label, Message, and Amount**
<img width="780" alt="Screen Shot 2021-02-19 at 12 05 38 AM" src="https://user-images.githubusercontent.com/23396902/108466507-c18b9580-7251-11eb-8875-f3aeb9c4c8e9.png">
**Has Label and Amount, but no Message**
<img width="780" alt="Screen Shot 2021-02-19 at 12 05 58 AM" src="https://user-images.githubusercontent.com/23396902/108466421-9b65f580-7251-11eb-97eb-a3bfaa21fa7d.png">
ACKs for top commit:
hebasto:
re-ACK bb3da8fe41
Tree-SHA512: d98f1a6e05ebf6d9d056bc5754aca78ca7ecda93f497dba88187b947ca4a261eb7dc5e8c872956315acaa0008cc39320fb5806e17117e0c873090ad917ca4a3d
ca5bd1c8e5 qt: Prevent the main window popup menu (Hennadii Stepanov)
Pull request description:
https://github.com/bitcoin/bitcoin/issues/11168 is not fixed by https://github.com/bitcoin/bitcoin/pull/11169 completely, as users are allowed to right click on the menu bar:
This PR moves the context menu prohibition from `QToolBar` instance to its parent `BitcoinGUI` instance, which is derived from `QMainWindow`.
ACKs for top commit:
jarolrod:
ACK ca5bd1c8e5, tested on Ubuntu 20.04 Qt 5.12. Confirming that I can replicate the behavior described on `master` and this `PR` fixes it.
leonardojobim:
tACK ca5bd1c8e5
Tree-SHA512: a654ecf7ee35bb271df039be77077c1e1f9514e332587ba8622cea18da6a5b3ae8a7eb421e404ec5993c31a2f4d028e0e456fcc01facdbf61a2bc3b1e8423982
