19d51a2907 qt: Avoid unnecessary translations (Hennadii Stepanov)
Pull request description:
Working on translation, I found these translations introduced in #79, that are unnecessary (assuming the universal nature of the "BTC" string).
ACKs for top commit:
jarolrod:
ACK 19d51a2907
Tree-SHA512: b45551a54a323c5ba3779f4c1d7c8e7ec4d19a2e95fe70153f48234393bf1449a08e6bd24519ec035ebd4a98080a56af45e7a21546b47152e493b8e1b8f4345e
This change fixes broken Android APK build when the `depends/sources`
directory contains Qt source archives of different versions (e.g., Qt
version update pull request in CI with the cached `depends/sources`
directory).
51a3ac242c Have OutputGroup determine the value to use (Andrew Chow)
6d6d278475 Change SelectCoins_test to actually test SelectCoins (Andrew Chow)
9d3bd74ab4 Remove CreateTransaction while loop and some related variables (Andrew Chow)
6f0d5189af Remove use_bnb and bnb_used (Andrew Chow)
de26eb0e1f Do both BnB and Knapsack coin selection in SelectCoinsMinConf (Andrew Chow)
01dc8ebda5 Have KnapsackSolver actually use effective values (Andrew Chow)
bf26e018de Roll static tx fees into nValueToSelect instead of having it be separate (Andrew Chow)
cc3f14b27c Move output reductions for fee to after coin selection (Andrew Chow)
d97d25d950 Make cost_of_change part of CoinSelectionParams (Andrew Chow)
af5867c896 Move some calculations to common code in SelectCoinsMinConf (Andrew Chow)
1bf4a62cb6 scripted-diff: rename some variables (Andrew Chow)
Pull request description:
Changes `KnapsackSolver` to use effective values instead of just the nominal txout value. Since fees are taken into account during the selection itself, we finally get rid of the `CreateTransaction` loop as well as a few other things that only were only necessary because of that loop.
This should not change coin selection behavior at all (except maybe remove weird edge cases that were caused by the loop). In order to keep behavior the same, `KnapsackSolver` will select outputs with a negative effective value (as it did before).
ACKs for top commit:
ryanofsky:
Code review ACK 51a3ac242c. Looks good to go!
instagibbs:
review ACK 51a3ac242c
meshcollider:
re-light-utACK 51a3ac242c
Tree-SHA512: 372c27e00edcd5dbf85177421ba88f20bfdaf1791b6e3dc022c44876ecc379403e2375ed69e71c512c49e6af87641001ff385c4b25ab93684b3a08a53bf3824e
4f504f826b rpc: fix code comment for bumpfee/psbtbumpfee output (Jon Atack)
5cb7ac23fb rpc: fix docs for bumpfee psbt update (Jon Atack)
Pull request description:
Follow-up to #21544 and #20891 for the `bumpfee_helper` used for RPCs bumpfee and psbtbumpfee:
- "psbt" field is only returned in psbtbumpfee and not bumpfee
- bumpfee raises if private keys are disabled, so the txid help "Only returned when wallet private keys are enabled." no longer makes sense; remove it
- add missing space in RPC examples ("Bump the fee, get the new transaction'stxid")
- update txid/psbt code comments
ACKs for top commit:
klementtan:
ACK [`4f504f8`](4f504f826b)
Tree-SHA512: 194faf8af52383eb8ac5cd22825265931bcde135dac79d8ecc4f84f698070da9b9373c00eef8623961881bb293157c7c9a0d71d1bcccf481ae3605a2d1444ed8
a7a43e8fe8 Factor feefilter logic out (amadeuszpawlik)
c0385f10a1 Remove -feefilter option (amadeuszpawlik)
Pull request description:
net: Remove -feefilter option, as it is debug only and isn't used in any tests. Checking this option for every peer on every iteration of the message handler is unnecessary, as described in #21545.
refactor: Move feefilter logic out into a separate `MaybeSendFeefilter(...)` function to improve readability of the already long `SendMessages(...)`. fixes #21545
The configuration option `-feefilter` has been added in 9e072a6e66: _"Implement "feefilter" P2P message"_
According to the [BIP133](https://github.com/bitcoin/bips/blob/master/bip-0133.mediawiki), turning the fee filter off was ment for:
> [...] a node [...] using prioritisetransaction to accept transactions whose actual fee rates might fall below the node's mempool min fee [in order to] disable the fee filter to make sure it is exposed to all possible txid's
`-feefilter` was subsequently set as debug only in #8150, with the motivation that the help message was too difficult to translate.
ACKs for top commit:
jnewbery:
Code review ACK a7a43e8fe8
promag:
Code review ACK a7a43e8fe8.
MarcoFalke:
review ACK a7a43e8fe8🦁
Tree-SHA512: 8ef9a2f255597c0279d3047dcc968fd30fb7402e981b69206d08eed452c705ed568c24e646e98d06eac118eddd09205b584f45611d1c874abf38f48b08b67630
This adds a new descriptor with syntax e.g. tr(KEY,{S1,{{S2,S3},S4})
where KEY is a key expression for the internal key and S_i are
script expression for the leaves. They have to be organized in
nested {A,B} groups, with exactly two elements.
tr() only exists at the top level, and inside the script expressions
only pk() scripts are allowed for now.
That results in a much safer interface (making the tweak commit
to the key implicitly using a fixed tag means it can't be used for
unrelated tweaking).
This is just a small simplification to prepare for the follow-up instruction
of a CTxDestination variant for taproot outputs.
In the old code, WITNESS_V1_TAPROOT and WITNESS_UNKNOWN both produced
{version, program} as Solver() output. Change this so that WITNESS_V1_TAPROOT
produces just {program}, like WITNESS_V0_* do.
Only allow "packages" with no conflicts, sorted in order of dependency,
and no more than 25 for now. Note that these groups of transactions
don't necessarily need to adhere to some strict definition of a package
or have any dependency relationships. Clients are free to pass in a
batch of 25 unrelated transactions if they want to.
Maximum number of transactions allowed in a package is 25, equal to the
default mempool descendant limit: if a package has more transactions
than this, either it would fail default mempool descendant limit or the
transactions don't all have a dependency relationship (but then they
shouldn't be in a package together). Same rationale for 101KvB virtual
size package limit.
Note that these policies are only used in test accepts so far.
This allows us to easily create transaction chains for package
validation. We don't test_accept if submit=false because we want to be
able to make transactions that wouldn't pass ATMP (i.e. a child
transaction in a package would fail due to missing inputs).
Only allow test accepts for now. Use the CoinsViewTemporary to keep
track of coins created by each transaction so that subsequent
transactions can spend them. Uncache all coins since we only
ever do test accepts (Note this is different from ATMP which doesn't
uncache for valid test_accepts) to minimize impact on the coins cache.
Require that the input txns have no conflicts and be ordered
topologically. This commit isn't able to detect unsorted packages.
fe3d17df04 net: ignore block-relay-only peers when skipping DNS seed (Anthony Towns)
Pull request description:
Since #17428 bitcoind will attempt to reconnect to two block-relay-only anchors before doing any other outbound connections. When determining whether to use DNS seeds, it will currently see these two peers and decide "we're connected to the p2p network, so no need to lookup DNS" -- but block-relay-only peers don't do address relay, so if your address book is full of invalid addresses (apart from your anchors) this behaviour will prevent you from recovering from that situation.
This patch changes it so that it only skips use of DNS seeds when there are two full-outbound peers, not just block-relay-only peers.
ACKs for top commit:
Sjors:
utACK fe3d17d
amitiuttarwar:
ACK fe3d17df04, this impacts the very common case where we stop/start a node, persisting anchors & have a non-empty addrman (although, to be clear, wouldn't be particularly problematic in the common cases where the addrman has valid addresses)
mzumsande:
ACK fe3d17df04
jonatack:
ACK fe3d17df04
prayank23:
tACK fe3d17df04
Tree-SHA512: 9814b0d84321d7f45b5013eb40c420a0dd93bf9430f5ef12dce50d1912a18d5de2070d890a8c6fe737a3329b31059b823bc660b432d5ba21f02881dc1d951e94
0829516d1f [refactor] Remove unused ForEachNodeThen() template (John Newbery)
09cc66c00e scripted-diff: rename address relay fields (John Newbery)
76568a3351 [net processing] Move addr relay data and logic into net processing (John Newbery)
caba7ae8a5 [net processing] Make RelayAddress() a member function of PeerManagerImpl (John Newbery)
86acc96469 [net processing] Take NodeId instead of CNode* as originator for RelayAddress() (John Newbery)
Pull request description:
This continues the work of moving application layer data into net_processing, by moving all addr data into the new Peer object added in #19607.
For motivation, see #19398.
ACKs for top commit:
laanwj:
Code review ACK 0829516d1f
mzumsande:
ACK 0829516d1f, reviewed the code and ran tests.
sipa:
utACK 0829516d1f
hebasto:
re-ACK 0829516d1f
Tree-SHA512: efe0410fac288637f203eb37d1999910791e345872d37e1bd5cde50e25bb3cb1c369ab86b3a166ffd5e06ee72e4508aa2c46d658be6a54e20b4f220d2f57d0a6
fafd121026 refactor: Make CFeeRate constructor architecture-independent (MarcoFalke)
Pull request description:
Currently the constructor is architecture dependent. This is confusing for several reasons:
* It is impossible to create a transaction larger than the max value of `uint32_t`, so a 64-bit `size_t` is not needed
* Policy (and consensus) code should be arch-independent
* The current code will print spurious compile errors when compiled on 32-bit systems:
```
policy/feerate.cpp:23:22: warning: result of comparison of constant 9223372036854775807 with expression of type 'size_t' (aka 'unsigned int') is always true [-Wtautological-constant-out-of-range-compare]
assert(nBytes_ <= uint64_t(std::numeric_limits<int64_t>::max()));
```
Fix all issues by making it arch-independent. Also, fix `{}` style according to dev notes.
ACKs for top commit:
theStack:
re-ACK fafd121026
promag:
Code review ACK fafd121026.
Tree-SHA512: e16f75bad9ee8088b87e873906d9b5633449417a6996a226a2f37d33a2b7d4f2fd91df68998a77e52163de20b40c57fadabe7fe3502e599cbb98494178591833
aca0e5dcdb Remove `GetDataDir(bool fNetSpecific = true)` function (Kiminuo)
b3e67f20a0 scripted-diff: Replace `GetDataDir(true)` calls with `gArgs.GetDataDirNet()` calls (Kiminuo)
4c3a5dcbfc scripted-diff: Replace `GetDataDir()` calls with `gArgs.GetDataDirNet()` calls (Kiminuo)
13bd8bb053 Make `ArgsManager.GetDataDirPath` private and drop needless suffix (Kiminuo)
4d8189f620 scripted-diff: Change `ArgsManager.GetDataDirPath()` to `ArgsManager.GetDataDirBase()` in tests (Kiminuo)
0f53df47d5 Add `ArgsManager.GetDataDirBase()` and `ArgsManager.GetDataDirNet()` as an intended replacement for `ArgsManager.GetDataDirPath(net_identifier)` (Kiminuo)
716de29dd8 Make `m_cached_blocks_path` mutable. Make `ArgsManager::GetBlocksDirPath()` const. (Kiminuo)
Pull request description:
This PR is a follow up PR to #21244. The PR attempts to move us an inch towards the [goal](https://github.com/bitcoin/bitcoin/pull/21244#discussion_r615307465) by removing `GetDataDir(net_specific)` and replacing it by `gArgs.GetDataDir(net_specific)` calls.
The approach of this PR attempts to be similar to the one chosen in "De-globalize ChainstateManager" (#20158). The goal is to pass `ArgsManager` to functions (or ideally to have `ArgsManager` as a member of a class where needed; inspiration from here: #21789) instead of having it as a global variable (i.e. `gArgs`).
**Notes:**
* First commit makes `m_cached_blocks_path` `mutable` as was suggested [here](https://github.com/bitcoin/bitcoin/pull/21244#discussion_r615274095) but not fully applied in #21244. (`m_cached_datadir_path` and `m_cached_network_datadir_path` were marked as `mutable` in #21244) This commit can be in a separate PR too.
* Other commits deal with removing of `GetDataDir(net_specific)` function.
* This was originally part of #21244 but it was [left]((https://github.com/bitcoin/bitcoin/pull/21244#pullrequestreview-633779754)) for a follow up PR.
* I think that the proposed changes show nicely where there is reliance on `gArgs` which is IMO a good thing.
If you know about a better approach how to do this, please share it here.
ACKs for top commit:
hebasto:
ACK aca0e5dcdb
MarcoFalke:
re-ACK aca0e5dcdb👃
Tree-SHA512: deec4d88edb32d7f4c818c3a74ffbb64709685819b88242dcf5dbaa1fb611f3ce2b29d2576ddb9e0dc5e75288e43538968224008c0a80e7149fc81c309f7c9da
fad0867d6a Cleanup -includeconf error message (MarcoFalke)
fa9f711c37 Fix crash when parsing command line with -noincludeconf=0 (MarcoFalke)
Pull request description:
The error message has several issues:
* It may crash instead of cleanly shutting down, when `-noincludeconf=0` is passed
* It doesn't quote the value
* It includes an erroneous trailing `\n`
* It is redundantly mentioning `"-includeconf cannot be used from commandline;"` several times, when once should be more than sufficient
Fix all issues by:
* Replacing `get_str()` with `write()` to fix the crash and quoting issue
* Remove the `\n` and only print the first value to fix the other issues
Before:
```
$ ./src/bitcoind -noincludeconf=0
terminate called after throwing an instance of 'std::runtime_error'
what(): JSON value is not a string as expected
Aborted (core dumped)
$ ./src/bitcoind -includeconf='a b' -includeconf=c
Error: Error parsing command line arguments: -includeconf cannot be used from commandline; -includeconf=a b
-includeconf cannot be used from commandline; -includeconf=c
```
After:
```
$ ./src/bitcoind -noincludeconf=0
Error: Error parsing command line arguments: -includeconf cannot be used from commandline; -includeconf=true
$ ./src/bitcoind -includeconf='a b' -includeconf=c
Error: Error parsing command line arguments: -includeconf cannot be used from commandline; -includeconf="a b"
```
Hopefully fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=34493
Testcase: https://github.com/bitcoin/bitcoin/files/6515429/clusterfuzz-testcase-minimized-system-6328535926046720.log
```
FUZZ=system ./src/test/fuzz/fuzz ./clusterfuzz-testcase-minimized-system-6328535926046720.log
```
See https://github.com/bitcoin/bitcoin/blob/master/doc/fuzzing.md
ACKs for top commit:
sipa:
utACK fad0867d6a
Tree-SHA512: b44af93be6bf71b43669058c1449c4c6999f03b5b01b429851b149b12d77733408cb207e9a3edc6f0bffd6030c4c52165e8e23a1c2718ff5082a6ba254cc94a4
QProgressDialog estimates the time the operation will take (based on
time for steps), and only shows itself if that estimate is beyond
minimumDuration. The default minimumDuration value is 4 seconds, and it
could make users think that the GUI is frozen.
QProgressDialog shows itself if the estimated time an operation will
take is beyond the minimumDuration value.
Direct call show() breaks that behavior on macos.
