This and the following commit seek to decouple the libbitcoinkernel
library from the shutdown code. As a library, it should it should have
its own flexible interrupt infrastructure without relying on node-wide
globals.
The commit takes the first step towards this goal by de-globalising
`ShutdownRequested` calls in kernel code.
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: TheCharlatan <seb.kung@gmail.com>
32e2ffc393 Remove the syscall sandbox (fanquake)
Pull request description:
After initially being merged in #20487, it's no-longer clear that an internal syscall sandboxing mechanism is something that Bitcoin Core should have/maintain, especially when compared to better maintained/supported alterantives, i.e [firejail](https://github.com/netblue30/firejail).
There is more related discussion in #24771.
Note that given where it's used, the sandbox also gets dragged into the kernel.
If it's removed, this should not require any sort of deprecation, as this was only ever an opt-in, experimental feature.
Closes #24771.
ACKs for top commit:
davidgumberg:
crACK 32e2ffc393
achow101:
ACK 32e2ffc393
dergoegge:
ACK 32e2ffc393
Tree-SHA512: 8cf71c5623bb642cb515531d4a2545d806e503b9d57bfc15a996597632b06103d60d985fd7f843a3c1da6528bc38d0298d6b8bcf0be6f851795a8040d71faf16
After initially being merged in #20487, it's no-longer clear that an
internal syscall sandboxing mechanism is something that Bitcoin Core
should have/maintain, especially when compared to better
maintained/supported alterantives, i.e firejail.
Note that given where it's used, the sandbox also gets dragged into the
kernel.
There is some related discussion in #24771.
This should not require any sort of deprecation, as this was only ever
an opt-in, experimental feature.
Closes #24771.
Since the kernel library no longer depends on the system file, move it
to the common library instead in accordance to the diagram in
doc/design/libraries.md.
With the previous move of AlertNotify out of the validation file, and
thus out of the kernel library, ScheduleBatchPriority is the last
remaining function used by the kernel library from util/system. Move it
to its own file, such that util/system can be moved out of the util
library in the following few commits.
Moving util/system out of the kernel library removes further networking
as well as shell related code from it.
This is achieved by letting the index sync thread wait until
reindex-chainstate is finished.
This also disables the pruning check when reindexing the chainstate (which is
incompatible with prune mode) because there would be no chain at this point
in init.
Add a stop_after_block_import field to the BlockManager options. Use
this field instead of the global gArgs.
This should allow users of the BlockManager to not rely on the global
Args.
Add a blocks_dir field to the BlockManager options. Move functions
relying on the global gArgs to get the blocks_dir into the BlockManager
class.
This should eventually allow users of the BlockManager to not rely on
the global Args and instead pass in their own options.
Remove access to the global gArgs for the fastprune argument and
replace it by adding a field to the existing BlockManager Options
struct.
When running `clang-tidy-diff` on this commit, there is a diagnostic
error: `unknown type name 'uint64_t' [clang-diagnostic-error] uint64_t
prune_target{0};`, which is fixed by including cstdint.
This should eventually allow users of the BlockManager to not rely on
the global gArgs and instead pass in their own options.
This is a commit in preparation for the next few commits. The functions
are moved to methods to avoid their re-declaration for the purpose of
passing in BlockManager options.
The functions that were now moved into the BlockManager should no longer
use the params as an argument, but instead use the member variable.
In the moved ReadBlockFromDisk and UndoReadFromDisk, change
the function signature to accept a reference to a CBlockIndex instead of
a raw pointer. The pointer is expected to be non-null, so reflect that
in the type.
To allow for the move of functions to BlockManager methods all call
sites require an instantiated BlockManager, or a callback to one.
8f14fc8622 test: cover fastprune with excessive block size (Matthew Zipkin)
271c23e87f blockstorage: Adjust fastprune limit if block exceeds blockfile size (Martin Zumsande)
Pull request description:
The debug-only `-fastprune` option used in several tests is not always safe to use:
If a `-fastprune` node receives a block larger than the maximum blockfile size of `64kb` bad things happen: The while loop in `BlockManager::FindBlockPos` never terminates, and the node runs oom because memory for `m_blockfile_info` is allocated in each iteration of the loop.
The same would happen if a naive user used `-fastprune` on anything other than regtest (so this can be tested by syncing on signet for example, the first block that crashes the node is at height 2232).
Change the approach by raising the blockfile size to the size of the block, if that block otherwise wouldn't fit (idea by TheCharlatan).
ACKs for top commit:
ryanofsky:
Code review ACK 8f14fc8622. Added new assert, test, and comment since last review
TheCharlatan:
ACK 8f14fc8622
pinheadmz:
ACK 8f14fc8622
Tree-SHA512: df2fea30613ef9d40ebbc2416eacb574f6d7d96847db5c33dda22a29a2c61a8db831aa9552734ea4477e097f253dbcb6dcb1395d43d2a090cc0588c9ce66eac3
If the added block exceeds the blockfile size in test-only
-fastprune mode, the node would get stuck in an infinite loop and
run out of memory.
Avoid this by raising the blockfile size to the size of the added block
in this situation.
Co-authored-by: TheCharlatan <seb.kung@gmail.com>
This is an extraction of ArgsManager related functions from util/system
into their own common file.
Config file related functions are moved to common/config.cpp.
The background of this commit is an ongoing effort to decouple the
libbitcoinkernel library from the ArgsManager. The ArgsManager belongs
into the common library, since the kernel library should not depend on
it. See doc/design/libraries.md for more information on this rationale.
The fs.* files are already part of the libbitcoin_util library. With the
introduction of the fs_helpers.* it makes sense to move fs.* into the
util/ directory as well.
b3e78dc91d refactor: Don't use global chainparams in chainstatemanager method (TheCharlatan)
382b692a50 Split non/kernel chainparams (Carl Dong)
edabbc78a3 Add factory functions for Main/Test/Sig/Reg chainparams (Carl Dong)
d938098398 Remove UpdateVersionBitsParameters (Carl Dong)
84b85786f0 Decouple RegTestChainParams from ArgsManager (Carl Dong)
76cd4e7c96 Decouple SigNetChainParams from ArgsManager (Carl Dong)
Pull request description:
This pull request is part of the `libbitcoinkernel` project https://github.com/bitcoin/bitcoin/issues/24303https://github.com/bitcoin/bitcoin/projects/18 and more specifically its "Step 2: Decouple most non-consensus code from libbitcoinkernel". dongcarl is the original author of this patchset, these commits were taken from https://github.com/dongcarl/bitcoin/tree/2022-03-libbitcoinkernel-chainparams-args-only.
#### Context
The bitcoin kernel library currently relies on code containing user configurations through the `ArgsManager`. This is not optimal, since as a stand-alone library it should not rely on bitcoind's argument parsing logic. Instead, its interfaces should accept control and options structs that control the kernel library's desired configuration.
Similar work towards decoupling the `ArgsManager` from the kernel has been done in
https://github.com/bitcoin/bitcoin/pull/25290, https://github.com/bitcoin/bitcoin/pull/25487, https://github.com/bitcoin/bitcoin/pull/25527 and https://github.com/bitcoin/bitcoin/pull/25862.
#### Changes
By moving the `CChainParams` class definition into the kernel and giving it new factory functions `CChainParams::{RegTest,SigNet,Main,TestNet}`it can be constructed without an `ArgsManager` reference, unlike the current factory function `CreateChainParams`.
The first few commits remove uses of `ArgsManager` within `CChainParams`. Then the `CChainParams` definition is moved to a new file in the `kernel/` subdirectory.
ACKs for top commit:
MarcoFalke:
re-ACK b3e78dc91d🛁
ryanofsky:
Code review ACK b3e78dc91d. Only changes since last review were recent review suggestions.
ajtowns:
ACK b3e78dc91d
Tree-SHA512: 3835aca1d3e3c75cc3303dd584bab3a77e58f6c678724a5e359fe4b0e17e0763a00931ee6191f516b9fde50496f59cc691f0709c0254206db3863bbf7ab2cacd
Moves chainparams code not using the ArgsManager to the kernel.
Subsequently use the kernel chainparams header now where possible in
order to further decouple chainparams call sites from gArgs.
error is a low-level function with a sole dependency on LogPrintf, which
is defined in logging.h
The background of this commit is an ongoing effort to decouple the
libbitcoinkernel library from the ArgsManager defined in system.h.
Moving the function out of system.h allows including it from a separate
source file without including the ArgsManager definitions from system.h.
3141eab9c6 test: add functional test for ScanAndUnlinkAlreadyPrunedFiles (Andrew Toth)
e252909e56 test: add unit test for ScanAndUnlinkAlreadyPrunedFiles (Andrew Toth)
77557dda4a prune: scan and unlink already pruned block files on startup (Andrew Toth)
Pull request description:
There are a few cases where we can mark a block and undo file as pruned in our block index, but not actually remove the files from disk.
1. If we call `FindFilesToPrune` or `FindFilesToPruneManual` and crash before `UnlinkPrunedFiles`.
2. If on Windows there is an open file handle to the file somewhere else when calling `fs::remove` in `UnlinkPrunedFiles` (https://en.cppreference.com/w/cpp/filesystem/remove, https://learn.microsoft.com/en-us/windows/win32/api/fileapi/nf-fileapi-deletefilew#remarks). This could be from another process, or if we are calling `ReadBlockFromDisk`/`ReadRawBlockFromDisk` without having a lock on `cs_main` (which has been allowed since ccd8ef65f9).
This PR mitigates this by scanning all pruned block files on startup after `LoadBlockIndexDB` and unlinking them again.
ACKs for top commit:
achow101:
ACK 3141eab9c6
pablomartin4btc:
re-ACK with added functional test 3141eab9c6.
furszy:
Code review ACK 3141eab9
theStack:
Code-review ACK 3141eab9c6
Tree-SHA512: 6c73bc57838ad1b7e5d441af3c4d6bf4c61c4382e2b86485e57fbb74a61240710c0ceeceb8b4834e610ecfa3175c6955c81ea4b2285fee11ca6383f472979d8d
bf95976061 doc: add note about snapshot chainstate init (James O'Beirne)
e4d7995286 test: add testcases for snapshot initialization (James O'Beirne)
cced4e7336 test: move-only-ish: factor out LoadVerifyActivateChainstate() (James O'Beirne)
51fc9241c0 test: allow on-disk coins and block tree dbs in tests (James O'Beirne)
3c361391b8 test: add reset_chainstate parameter for snapshot unittests (James O'Beirne)
00b357c215 validation: add ResetChainstates() (James O'Beirne)
3a29dfbfb2 move-only: test: make snapshot chainstate setup reusable (James O'Beirne)
8153bd9247 blockmanager: avoid undefined behavior during FlushBlockFile (James O'Beirne)
ad67ff377c validation: remove snapshot datadirs upon validation failure (James O'Beirne)
34d1590331 add utilities for deleting on-disk leveldb data (James O'Beirne)
252abd1e8b init: add utxo snapshot detection (James O'Beirne)
f9f1735f13 validation: rename snapshot chainstate dir (James O'Beirne)
d14bebf100 db: add StoragePath to CDBWrapper/CCoinsViewDB (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11) (parent PR: https://github.com/bitcoin/bitcoin/pull/15606)
---
Half of the replacement for #24232. The original PR grew larger than expected throughout the review process.
This change adds the ability to initialize a snapshot-based chainstate during init if one is detected on disk. This is of course unused as of now (aside from in unittests) given that we haven't yet enabled actually loading snapshots.
Don't be scared! There are some big move-only commits in here.
Accompanying changes include:
- moving the snapshot coinsdb directory from being called `chainstate_[base blockhash]` to `chainstate_snapshot`, since we only support one snapshot in use at a time. This simplifies some logic, but it necessitates writing that base blockhash out to a file within the coinsdb dir. See [discussion here](https://github.com/bitcoin/bitcoin/pull/24232#discussion_r832762880).
- adding a simple fix in `FlushBlockFile()` that avoids a crash when attemping to flush to disk before `LoadBlockIndexDB()` is called, which happens when calling `MaybeRebalanceCaches()` during multiple chainstate init.
- improving the unittest to allow testing with on-disk chainstates - necessary to test a simulated restart and re-initialization.
ACKs for top commit:
naumenkogs:
utACK bf95976061
ariard:
Code Review ACK bf9597606
ryanofsky:
Code review ACK bf95976061. Changes since last review: rebasing, switching from CAutoFile to AutoFile, adding comments, switching from BOOST_CHECK to Assert in test util, using chainman.GetMutex() in tests, destroying one ChainstateManager before creating a new one in tests
fjahr:
utACK bf95976061
aureleoules:
ACK bf95976061
Tree-SHA512: 15ae75caf19f8d12a12d2647c52897904d27b265a7af6b4ae7b858592eeadb8f9da6c2394b6baebec90adc28742c053e3eb506119577dae7c1e722ebb3b7bcc0
bcb0cacac2 reindex, log, test: fixes #21379 (mruddy)
Pull request description:
Fixes #21379.
The blocks/blk?????.dat files are mutated and become increasingly malformed, or corrupt, as a result of running the re-indexing process.
The mutations occur after the re-indexing process has finished, as new blocks are appended, but are a result of a re-indexing process miscalculation that lingers in the block manager's `m_blockfile_info` `nSize` data until node restart.
These additions to the blk files are non-fatal, but also not desirable.
That is, this is a form of data corruption that the reading code is lenient enough to process (it skips the extra bytes), but it adds some scary looking log messages as it encounters them.
The summary of the problem is that the re-index process double counts the size of the serialization header (magic message start bytes [4 bytes] + length [4 bytes] = 8 bytes) while calculating the blk data file size (both values already account for the serialization header's size, hence why it is over accounted).
This bug manifests itself in a few different ways, after re-indexing, when a new block from a peer is processed:
1. If the new block will not fit into the last blk file processed while re-indexing, while remaining under the 128MiB limit, then the blk file is flushed to disk and truncated to a size that is 8 greater than it should be. The truncation adds zero bytes (see `FlatFileSeq::Flush` and `TruncateFile`).
1. If the last blk file processed while re-indexing has logical space for the new block under the 128 MiB limit:
1. If the blk file was not already large enough to hold the new block, then the zeros are, in effect, added by `fseek` when the file is opened for writing. Eight zero bytes are added to the end of the last blk file just before the new block is written. This happens because the write offset is 8 too great due to the miscalculation. The result is 8 zero bytes between the end of the last block and the beginning of the next block's magic + length + block.
1. If the blk file was already large enough to hold the new block, then the current existing file contents remain in the 8 byte gap between the end of the last block and the beginning of the next block's magic + length + block. Commonly, when this occcurs, it is due to the blk file containing blocks that are not connected to the block tree during reindex and are thus left behind by the reindex process and later overwritten when new blocks are added. The orphaned blocks can be valid blocks, but due to the nature of concurrent block download, the parent may not have been retrieved and written by the time the node was previously shutdown.
ACKs for top commit:
LarryRuane:
tested code-review ACK bcb0cacac2
ryanofsky:
Code review ACK bcb0cacac2. This is a disturbing bug with an easy fix which seems well-worth merging.
mzumsande:
ACK bcb0cacac2 (reviewed code and did some testing, I agree that it fixes the bug).
w0xlt:
tACK bcb0cacac2
Tree-SHA512: acc97927ea712916506772550451136b0f1e5404e92df24cc05e405bb09eb6fe7c3011af3dd34a7723c3db17fda657ae85fa314387e43833791e9169c0febe51
If we call FlushBlockFile() without having intitialized the block index
with LoadBlockIndexDB(), we may be indexing into an empty vector.
Specifically this is an issue when we call MaybeRebalanceCaches() during
chainstate init before the block index has been loaded, which calls
FlushBlockFile().
Also add an assert to avoid undefined behavior.
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
dd065dae9f refactor: Make mapBlocksUnknownParent local, and rename it (Hennadii Stepanov)
Pull request description:
This PR is a second attempt at #19594. This PR has two motivations:
- Improve code hygiene by eliminating a global variable, `mapBlocksUnknownParent`
- Fix fuzz test OOM when running too long ([see #19594 comment](https://github.com/bitcoin/bitcoin/pull/19594#issuecomment-958801638))
A minor added advantage is to release `mapBlocksUnknownParent` memory when the reindexing phase is done. The current situation is somewhat similar to a memory leak because this map exists unused for the remaining lifetime of the process. It's true that this map should be empty of data elements after use, but its internal metadata (indexing structures, etc.) can have non-trivial size because there can be many thousands of simultaneous elements in this map.
This PR helps our efforts to reduce the use of global variables. This variable isn't just global, it's hidden inside a function (it looks like a local variable but has the `static` attribute).
This global variable exists because the `-reindex` processing code calls `LoadExternalBlockFile()` multiple times (once for each block file), but that function must preserve some state between calls (the `mapBlocksUnknownParent` map). This PR fixes this by allocating this map as a local variable in the caller's scope and passing it in on each call. When reindexing completes, the map goes out of scope and is deallocated.
I tested this manually by reindexing on mainnet and signet. Also, the existing `feature_reindex.py` functional test passes.
ACKs for top commit:
mzumsande:
re-ACK dd065dae9f
theStack:
re-ACK dd065dae9f
shaavan:
reACK dd065dae9f
Tree-SHA512: 9cd20e44d2fa1096dd405bc107bc065ea8f904f5b3f63080341b08d8cf57b790df565f58815c2f331377d044d5306708b4bf6bdfc5ef8d0ed85d8e97d744732c
Also:
1. Have CChainState::LoadMempool and ::ThreadImport take in paths and
pass it through untouched to LoadMempool.
2. Make LoadMempool exit early if the load_path is empty.
3. Adjust the call to ::ThreadImport in ::AppInitMain to correctly pass
in an empty path if mempool persistence is disabled.
This fixes a blk file size calculation made during reindex that results in increased blk file malformity.
The fix is to avoid double counting the size of the serialization header during reindex.
This adds a unit test to reproduce the bug before the fix and to ensure that it does not recur.
These changes include a log message change also so as to not be as alarming. This is a common and recoverable
data corruption. These messages can now be filtered by the debug log reindex category.
In previous commits in this patchset, we've made sure that every
Unload/UnloadBlockIndex member function resets its own members, and does
not reach out to globals.
This means that their corresponding classes' default destructors can now
replace them, and do an even more thorough job without the need to be
updated for every new member variable.
Therefore, we can remove them, and also remove UnloadBlockIndex since
that's not used anymore.
Unfortunately, chainstatemanager_loadblockindex relies on
CChainState::UnloadBlockIndex, so that needs to stay for now.
This change also introduces an aditional buffer of 10 blocks (PRUNE_LOCK_BUFFER) that will not be pruned before the best block.
Co-authored-by: Luke Dashjr <luke-jr+git@utopios.org>
-----
Code Reviewer Notes
Call graph of relevant functions:
UnloadBlockIndex() <-- Moved from
calls ChainstateManager::Unload()
which calls BlockManager::Unload() <-- Moved to
So calling UnloadBlockIndex() would still run this moved code. The code
will also now run when ~BlockManager gets called, which makes sense.
