From 3d1bb1a122a037e966c2fb2e2113f0440edb8d93 Mon Sep 17 00:00:00 2001 From: Hennadii Stepanov <32963518+hebasto@users.noreply.github.com> Date: Tue, 13 Feb 2024 11:11:52 +0000 Subject: [PATCH] qt: Update translation source file for v27.0 string freeze The diff is produced by running `make -C src translate`. --- src/qt/bitcoinstrings.cpp | 9 +- src/qt/locale/bitcoin_en.ts | 141 +- src/qt/locale/bitcoin_en.xlf | 2732 +++++++++++++++++----------------- 3 files changed, 1476 insertions(+), 1406 deletions(-) diff --git a/src/qt/bitcoinstrings.cpp b/src/qt/bitcoinstrings.cpp index f7ba618d211..6035647f1c2 100644 --- a/src/qt/bitcoinstrings.cpp +++ b/src/qt/bitcoinstrings.cpp @@ -258,6 +258,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Disk space is too low!"), QT_TRANSLATE_NOOP("bitcoin-core", "Do you want to rebuild the block database now?"), QT_TRANSLATE_NOOP("bitcoin-core", "Done loading"), QT_TRANSLATE_NOOP("bitcoin-core", "Dump file %s does not exist."), +QT_TRANSLATE_NOOP("bitcoin-core", "Error committing db txn for wallet transactions removal"), QT_TRANSLATE_NOOP("bitcoin-core", "Error creating %s"), QT_TRANSLATE_NOOP("bitcoin-core", "Error initializing block database"), QT_TRANSLATE_NOOP("bitcoin-core", "Error initializing wallet database environment %s!"), @@ -270,9 +271,10 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Error opening block database"), QT_TRANSLATE_NOOP("bitcoin-core", "Error reading configuration file: %s"), QT_TRANSLATE_NOOP("bitcoin-core", "Error reading from database, shutting down."), QT_TRANSLATE_NOOP("bitcoin-core", "Error reading next record from wallet database"), +QT_TRANSLATE_NOOP("bitcoin-core", "Error starting db txn for wallet transactions removal"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: Cannot extract destination from the generated scriptpubkey"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: Could not add watchonly tx %s to watchonly wallet"), -QT_TRANSLATE_NOOP("bitcoin-core", "Error: Could not delete watchonly transactions"), +QT_TRANSLATE_NOOP("bitcoin-core", "Error: Could not delete watchonly transactions. "), QT_TRANSLATE_NOOP("bitcoin-core", "Error: Couldn't create cursor into database"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: Disk space is low for %s"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: Dumpfile checksum does not match. Computed %s, expected %s"), @@ -282,7 +284,6 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Error: Got value that was not hex: %s"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: Keypool ran out, please call keypoolrefill first"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: Missing checksum"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: No %s addresses available."), -QT_TRANSLATE_NOOP("bitcoin-core", "Error: Not all watchonly txs could be deleted"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: This wallet already uses SQLite"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: This wallet is already a descriptor wallet"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: Unable to begin reading all records in the database"), @@ -294,10 +295,13 @@ QT_TRANSLATE_NOOP("bitcoin-core", "Error: Unable to remove watchonly address boo QT_TRANSLATE_NOOP("bitcoin-core", "Error: Unable to write record to new wallet"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: Unable to write solvable wallet best block locator record"), QT_TRANSLATE_NOOP("bitcoin-core", "Error: Unable to write watchonly wallet best block locator record"), +QT_TRANSLATE_NOOP("bitcoin-core", "Error: address book copy failed for wallet %s"), +QT_TRANSLATE_NOOP("bitcoin-core", "Error: database transaction cannot be executed for wallet %s"), QT_TRANSLATE_NOOP("bitcoin-core", "Failed to listen on any port. Use -listen=0 if you want this."), QT_TRANSLATE_NOOP("bitcoin-core", "Failed to rescan the wallet during initialization"), QT_TRANSLATE_NOOP("bitcoin-core", "Failed to start indexes, shutting down.."), QT_TRANSLATE_NOOP("bitcoin-core", "Failed to verify database"), +QT_TRANSLATE_NOOP("bitcoin-core", "Failure removing transaction: %s"), QT_TRANSLATE_NOOP("bitcoin-core", "Fee rate (%s) is lower than the minimum fee rate setting (%s)"), QT_TRANSLATE_NOOP("bitcoin-core", "Ignoring duplicate -wallet %s."), QT_TRANSLATE_NOOP("bitcoin-core", "Importing…"), @@ -355,6 +359,7 @@ QT_TRANSLATE_NOOP("bitcoin-core", "The wallet will avoid paying less than the mi QT_TRANSLATE_NOOP("bitcoin-core", "This is experimental software."), QT_TRANSLATE_NOOP("bitcoin-core", "This is the minimum transaction fee you pay on every transaction."), QT_TRANSLATE_NOOP("bitcoin-core", "This is the transaction fee you will pay if you send a transaction."), +QT_TRANSLATE_NOOP("bitcoin-core", "Transaction %s does not belong to this wallet"), QT_TRANSLATE_NOOP("bitcoin-core", "Transaction amount too small"), QT_TRANSLATE_NOOP("bitcoin-core", "Transaction amounts must not be negative"), QT_TRANSLATE_NOOP("bitcoin-core", "Transaction change output index out of range"), diff --git a/src/qt/locale/bitcoin_en.ts b/src/qt/locale/bitcoin_en.ts index 7f0e43a1bdb..01b428d46e5 100644 --- a/src/qt/locale/bitcoin_en.ts +++ b/src/qt/locale/bitcoin_en.ts @@ -427,7 +427,7 @@ Signing is only possible with addresses of the type 'legacy'. - + Network activity disabled. A substring of the tooltip. @@ -438,7 +438,7 @@ Signing is only possible with addresses of the type 'legacy'. - + Send coins to a Bitcoin address Send coins to a Bitcoin address @@ -553,7 +553,7 @@ Signing is only possible with addresses of the type 'legacy'. Tabs toolbar - + Syncing Headers (%1%)… @@ -578,7 +578,7 @@ Signing is only possible with addresses of the type 'legacy'. - + Request payments (generates QR codes and bitcoin: URIs) @@ -598,7 +598,7 @@ Signing is only possible with addresses of the type 'legacy'. - + Processed %n block(s) of transaction history. Processed %n block of transaction history. @@ -646,7 +646,7 @@ Signing is only possible with addresses of the type 'legacy'. Up to date - + Ctrl+Q @@ -802,7 +802,7 @@ Signing is only possible with addresses of the type 'legacy'. - + %1 client @@ -1416,7 +1416,7 @@ Signing is only possible with addresses of the type 'legacy'. Bitcoin - + %n GB of space available %n GB of space available @@ -1747,7 +1747,12 @@ The migration process will create a backup of the wallet before migrating. This - + + Font in the Overview tab: + + + + Options set in this dialog are overridden by the command line: @@ -1772,7 +1777,7 @@ The migration process will create a backup of the wallet before migrating. This &Reset Options - + &Network &Network @@ -2044,22 +2049,7 @@ The migration process will create a backup of the wallet before migrating. This - - Monospaced font in the Overview tab: - - - - - embedded "%1" - - - - - closest matching "%1" - - - - + &OK &OK @@ -2069,7 +2059,7 @@ The migration process will create a backup of the wallet before migrating. This &Cancel - + Compiled without external signing support (required for external signing) "External signing" means using devices such as hardware wallets. @@ -2080,25 +2070,25 @@ The migration process will create a backup of the wallet before migrating. This default - + none - + Confirm options reset Window title text of pop-up window shown when the user has chosen to reset options. Confirm options reset - + Client restart required to activate changes. Text explaining that the settings changed will not come into effect until the client is restarted. - + Current settings will be backed up at "%1". Text explaining to the user that the client's current settings will be backed up at a specific location. %1 is a stand-in argument for the backup location's path. @@ -2142,7 +2132,7 @@ The migration process will create a backup of the wallet before migrating. This - + This change would require a client restart. @@ -2155,7 +2145,7 @@ The migration process will create a backup of the wallet before migrating. This OptionsModel - + Could not read setting "%1", %2. @@ -2747,7 +2737,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + %1 kB @@ -2789,6 +2779,21 @@ If you are receiving this error you should request the merchant provide a BIP21 unknown + + + Embedded "%1" + + + + + Default system font "%1" + + + + + Custom… + + QRImageWidget @@ -3293,7 +3298,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Inbound: initiated by peer Explanatory text for an inbound peer connection. @@ -3386,7 +3391,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + &Copy address Context menu action to copy the address of a peer. @@ -3458,7 +3463,12 @@ If you are receiving this error you should request the merchant provide a BIP21 - + + Node window - [%1] + + + + Executing command using "%1" wallet @@ -4363,7 +4373,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 ShutdownWindow - + %1 is shutting down… @@ -5241,7 +5251,7 @@ Go to File > Open Wallet to load a wallet. Send Coins - + @@ -5831,6 +5841,11 @@ Unable to restore backup of wallet. Dump file %s does not exist. + + + Error committing db txn for wallet transactions removal + + Error creating %s @@ -5893,16 +5908,16 @@ Unable to restore backup of wallet. - Error: Cannot extract destination from the generated scriptpubkey - - - - - Error: Could not delete watchonly transactions + Error starting db txn for wallet transactions removal + Error: Cannot extract destination from the generated scriptpubkey + + + + Error: Couldn't create cursor into database @@ -5946,11 +5961,6 @@ Unable to restore backup of wallet. Error: No %s addresses available. - - - Error: Not all watchonly txs could be deleted - - Error: This wallet already uses SQLite @@ -6006,6 +6016,16 @@ Unable to restore backup of wallet. Error: Unable to write watchonly wallet best block locator record + + + Error: address book copy failed for wallet %s + + + + + Error: database transaction cannot be executed for wallet %s + + Failed to listen on any port. Use -listen=0 if you want this. @@ -6026,6 +6046,11 @@ Unable to restore backup of wallet. Failed to verify database + + + Failure removing transaction: %s + + Fee rate (%s) is lower than the minimum fee rate setting (%s) @@ -6301,6 +6326,11 @@ Unable to restore backup of wallet. This is the transaction fee you will pay if you send a transaction. + + + Transaction %s does not belong to this wallet + + Transaction amount too small @@ -6432,12 +6462,17 @@ Unable to restore backup of wallet. - + Error: Could not add watchonly tx %s to watchonly wallet - + + Error: Could not delete watchonly transactions. + + + + User Agent comment (%s) contains unsafe characters. @@ -6457,7 +6492,7 @@ Unable to restore backup of wallet. - + Settings file could not be read diff --git a/src/qt/locale/bitcoin_en.xlf b/src/qt/locale/bitcoin_en.xlf index 0375b6bdbed..2bab80e3ddf 100644 --- a/src/qt/locale/bitcoin_en.xlf +++ b/src/qt/locale/bitcoin_en.xlf @@ -381,12 +381,12 @@ Signing is only possible with addresses of the type 'legacy'. Network activity disabled. - 1004 + 1006 A substring of the tooltip. Proxy is <b>enabled</b>: %1 - 1455 + 1457 Send coins to a Bitcoin address @@ -482,23 +482,23 @@ Signing is only possible with addresses of the type 'legacy'. Syncing Headers (%1%)… - 1048 + 1050 Synchronizing with network… - 1106 + 1108 Indexing blocks on disk… - 1111 + 1113 Processing blocks on disk… - 1113 + 1115 Connecting to peers… - 1120 + 1122 Request payments (generates QR codes and bitcoin: URIs) @@ -517,7 +517,7 @@ Signing is only possible with addresses of the type 'legacy'. 362 - 1129 + 1131 Processed %n block(s) of transaction history. @@ -527,35 +527,35 @@ Signing is only possible with addresses of the type 'legacy'. %1 behind - 1152 + 1154 Catching up… - 1157 + 1159 Last received block was generated %1 ago. - 1176 + 1178 Transactions after this will not yet be visible. - 1178 + 1180 Error - 1218 + 1220 Warning - 1222 + 1224 Information - 1226 + 1228 Up to date - 1133 + 1135 Ctrl+Q @@ -685,18 +685,18 @@ Signing is only possible with addresses of the type 'legacy'. %1 client - 815 + 817 &Hide - 883 + 885 S&how - 884 + 886 - 1001 + 1003 A substring of the tooltip. %n active connection(s) to Bitcoin network. @@ -707,111 +707,111 @@ Signing is only possible with addresses of the type 'legacy'. Click for more actions. - 1011 + 1013 A substring of the tooltip. "More actions" are available via the context menu. Show Peers tab - 1028 + 1030 A context menu item. The "Peers tab" is an element of the "Node window". Disable network activity - 1036 + 1038 A context menu item. Enable network activity - 1038 + 1040 A context menu item. The network activity was disabled previously. Pre-syncing Headers (%1%)… - 1055 + 1057 Error creating wallet - 1194 + 1196 Cannot create new wallet, the software was compiled without sqlite support (required for descriptor wallets) - 1194 + 1196 Error: %1 - 1219 + 1221 Warning: %1 - 1223 + 1225 Date: %1 - 1331 + 1333 Amount: %1 - 1332 + 1334 Wallet: %1 - 1334 + 1336 Type: %1 - 1336 + 1338 Label: %1 - 1338 + 1340 Address: %1 - 1340 + 1342 Sent transaction - 1341 + 1343 Incoming transaction - 1341 + 1343 HD key generation is <b>enabled</b> - 1393 + 1395 HD key generation is <b>disabled</b> - 1393 + 1395 Private key <b>disabled</b> - 1393 + 1395 Wallet is <b>encrypted</b> and currently <b>unlocked</b> - 1416 + 1418 Wallet is <b>encrypted</b> and currently <b>locked</b> - 1424 + 1426 Original message: - 1543 + 1545 Unit to show amounts in. Click to select another unit. - 1582 + 1584 @@ -1279,7 +1279,7 @@ The migration process will create a backup of the wallet before migrating. This 139 - 301 + 303 %n GB of space available @@ -1288,7 +1288,7 @@ The migration process will create a backup of the wallet before migrating. This - 303 + 305 (of %n GB needed) @@ -1297,7 +1297,7 @@ The migration process will create a backup of the wallet before migrating. This - 306 + 308 (%n GB needed for full chain) @@ -1307,18 +1307,18 @@ The migration process will create a backup of the wallet before migrating. This Choose data directory - 323 + 325 At least %1 GB of data will be stored in this directory, and it will grow over time. - 378 + 380 Approximately %1 GB of data will be stored in this directory. - 381 + 383 - 390 + 392 Explanatory text on the capability of the current prune target. (sufficient to restore backups %n day(s) old) @@ -1329,19 +1329,19 @@ The migration process will create a backup of the wallet before migrating. This %1 will download and store a copy of the Bitcoin block chain. - 392 + 394 The wallet will also be stored in this directory. - 394 + 396 Error: Specified data directory "%1" cannot be created. - 250 + 252 Error - 280 + 282 @@ -1363,11 +1363,11 @@ The migration process will create a backup of the wallet before migrating. This %1 is shutting down… - 145 + 146 Do not shut down the computer until this window disappears. - 146 + 147 @@ -1563,419 +1563,425 @@ The migration process will create a backup of the wallet before migrating. This 672 - Options set in this dialog are overridden by the command line: - 899 + Font in the Overview tab: + 779 - Open the %1 configuration file from the working directory. - 944 + Options set in this dialog are overridden by the command line: + 824 - Open Configuration File - 947 + Open the %1 configuration file from the working directory. + 869 - Reset all client options to default. - 957 + Open Configuration File + 872 - &Reset Options - 960 + Reset all client options to default. + 882 + &Reset Options + 885 + + &Network 315 - + Prune &block storage to 61 - + GB 71 - + Reverting this setting requires re-downloading the entire blockchain. 96 - + Maximum database cache size. A larger cache can contribute to faster sync, after which the benefit is less pronounced for most use cases. Lowering the cache size will reduce memory usage. Unused mempool memory is shared for this cache. 108 Tooltip text for Options window setting that sets the size of the database cache. Explains the corresponding effects of increasing/decreasing this value. - + MiB 127 - + Set the number of script verification threads. Negative values correspond to the number of cores you want to leave free to the system. 154 Tooltip text for Options window setting that sets the number of script verification threads. Explains that negative values mean to leave these many cores free to the system. - + (0 = auto, <0 = leave that many cores free) 170 - + This allows you or a third party tool to communicate with the node through command-line and JSON-RPC commands. 192 Tooltip text for Options window setting that enables the RPC server. - + Enable R&PC server 195 An Options window setting to enable the RPC server. - + W&allet 216 - + Whether to set subtract fee from amount as default or not. 222 Tooltip text for Options window setting that sets subtracting the fee from a sending amount as default. - + Subtract &fee from amount by default 225 An Options window setting to set subtracting the fee from a sending amount as default. - + Expert 232 - + Enable coin &control features 241 - + If you disable the spending of unconfirmed change, the change from a transaction cannot be used until that transaction has at least one confirmation. This also affects how your balance is computed. 248 - + &Spend unconfirmed change 251 - + Enable &PSBT controls 258 An options window setting to enable PSBT controls. - + Whether to show PSBT controls. 261 Tooltip text for options window setting that enables PSBT controls. - + External Signer (e.g. hardware wallet) 271 - + &External signer script path 279 - + Automatically open the Bitcoin client port on the router. This only works when your router supports UPnP and it is enabled. 321 - + Map port using &UPnP 324 - + Automatically open the Bitcoin client port on the router. This only works when your router supports NAT-PMP and it is enabled. The external port could be random. 331 - + Map port using NA&T-PMP 334 - + Accept connections from outside. 341 - + Allow incomin&g connections 344 - + Connect to the Bitcoin network through a SOCKS5 proxy. 351 - + &Connect through SOCKS5 proxy (default proxy): 354 - + Proxy &IP: 363 550 - + &Port: 395 582 - + Port of the proxy (e.g. 9050) 420 607 - + Used for reaching peers via: 444 - + IPv4 467 - + IPv6 490 - + Tor 513 - + &Window 643 - + Show the icon in the system tray. 649 - + &Show tray icon 652 - + Show only a tray icon after minimizing the window. 662 - + &Minimize to the tray instead of the taskbar 665 - + M&inimize on close 675 - + &Display 696 - + User Interface &language: 704 - + The user interface language can be set here. This setting will take effect after restarting %1. 717 - + &Unit to show amounts in: 728 - + Choose the default subdivision unit to show in the interface and when sending coins. 741 - + Third-party URLs (e.g. a block explorer) that appear in the transactions tab as context menu items. %s in the URL is replaced by transaction hash. Multiple URLs are separated by vertical bar |. 752 765 - + &Third-party transaction URLs 755 - + Whether to show coin control features or not. 238 - + Connect to the Bitcoin network through a separate SOCKS5 proxy for Tor onion services. 538 - + Use separate SOCKS&5 proxy to reach peers via Tor onion services: 541 - - Monospaced font in the Overview tab: - 777 - - embedded "%1" - 785 + &OK + 965 - closest matching "%1" - 834 - - - &OK - 1040 - - &Cancel - 1053 + 978 - + Compiled without external signing support (required for external signing) - 96 + 152 "External signing" means using devices such as hardware wallets. - + default - 108 + 164 - + none - 194 + 238 - + Confirm options reset - 301 + 347 Window title text of pop-up window shown when the user has chosen to reset options. - + Client restart required to activate changes. - 292 - 371 + 338 + 419 Text explaining that the settings changed will not come into effect until the client is restarted. - + Current settings will be backed up at "%1". - 296 + 342 Text explaining to the user that the client's current settings will be backed up at a specific location. %1 is a stand-in argument for the backup location's path. - + Client will be shut down. Do you want to proceed? - 299 + 345 Text asking the user to confirm if they would like to proceed with a client shutdown. - + Configuration options - 319 + 365 Window title text of pop-up box that allows opening up of configuration file. - + The configuration file is used to specify advanced user options which override GUI settings. Additionally, any command-line options will override this configuration file. - 322 + 368 Explanatory text about the priority order of instructions considered by client. The order from high to low being: command-line, configuration file, GUI settings. - + Continue - 325 + 371 + + + Cancel + 372 + + + Error + 381 - Cancel - 326 + The configuration file could not be opened. + 381 - Error - 335 + This change would require a client restart. + 423 - The configuration file could not be opened. - 335 + The supplied proxy address is invalid. + 451 + + - This change would require a client restart. - 375 + Embedded "%1" + 62 - The supplied proxy address is invalid. - 403 + Default system font "%1" + 63 + + + Custom… + 64 - + Could not read setting "%1", %2. - 199 + 230 - + Form 14 - + The displayed information may be out of date. Your wallet automatically synchronizes with the Bitcoin network after a connection is established, but this process has not completed yet. 76 411 - + Watch-only: 284 - + Available: 294 - + Your current spendable balance 304 - + Pending: 339 - + Total of transactions that have yet to be confirmed, and do not yet count toward the spendable balance 139 - + Immature: 239 - + Mined balance that has not yet matured 210 - + Balances 60 - + Total: 200 - + Your current total balance 249 - + Your current balance in watch-only addresses 323 - + Spendable: 346 - + Recent transactions 395 - + Unconfirmed transactions to watch-only addresses 120 - + Mined balance in watch-only addresses that has not yet matured 158 - + Current total balance in watch-only addresses 268 @@ -1983,7 +1989,7 @@ The migration process will create a backup of the wallet before migrating. This - + Privacy mode activated for the Overview tab. To unmask the values, uncheck Settings->Mask values. 184 @@ -1991,27 +1997,27 @@ The migration process will create a backup of the wallet before migrating. This - + PSBT Operations 14 - + Sign Tx 86 - + Broadcast Tx 102 - + Copy to Clipboard 122 - + Save… 129 - + Close 136 @@ -2019,112 +2025,112 @@ The migration process will create a backup of the wallet before migrating. This - + Failed to load transaction: %1 60 - + Failed to sign transaction: %1 85 - + Cannot sign inputs while wallet is locked. 93 - + Could not sign any more inputs. 95 - + Signed %1 inputs, but more signatures are still required. 97 - + Signed transaction successfully. Transaction is ready to broadcast. 100 - + Unknown error processing transaction. 112 - + Transaction broadcast successfully! Transaction ID: %1 122 - + Transaction broadcast failed: %1 125 - + PSBT copied to clipboard. 134 - + Save Transaction Data 157 - + Partially Signed Transaction (Binary) 159 Expanded name of the binary PSBT file format. See: BIP 174. - + PSBT saved to disk. 166 - + Sends %1 to %2 183 - + own address 187 - + Unable to calculate transaction fee or total transaction amount. 195 - + Pays transaction fee: 197 - + Total Amount 209 - + or 212 - + Transaction has %1 unsigned inputs. 218 - + Transaction is missing some information about inputs. 264 - + Transaction still needs signature(s). 268 - + (But no wallet is loaded.) 271 - + (But this wallet cannot sign transactions.) 274 - + (But this wallet does not have the right keys.) 277 - + Transaction is fully signed and ready for broadcast. 285 - + Transaction status is unknown. 289 @@ -2132,37 +2138,37 @@ The migration process will create a backup of the wallet before migrating. This - + Payment request error 149 - + Cannot start bitcoin: click-to-pay handler 150 - + URI handling 198 214 220 227 - + 'bitcoin://' is not a valid URI. Use 'bitcoin:' instead. 198 - + Cannot process payment request because BIP70 is not supported. Due to widespread security flaws in BIP70 it's strongly recommended that any merchant instructions to switch wallets be ignored. If you are receiving this error you should request the merchant provide a BIP21 compatible URI. 215 238 - + URI cannot be parsed! This can be caused by an invalid Bitcoin address or malformed URI parameters. 228 - + Payment request file handling 237 @@ -2170,52 +2176,52 @@ If you are receiving this error you should request the merchant provide a BIP21 - + User Agent 112 Title of Peers Table column which contains the peer's User Agent string. - + Ping 103 Title of Peers Table column which indicates the current latency of the connection with the peer. - + Peer 85 Title of Peers Table column which contains a unique number used to identify a connection. - + Age 88 Title of Peers Table column which indicates the duration (length of time) since the peer connection started. - + Direction 94 Title of Peers Table column which indicates the direction the peer connection was initiated from. - + Sent 106 Title of Peers Table column which indicates the total amount of network information we have sent to the peer. - + Received 109 Title of Peers Table column which indicates the total amount of network information we have received from the peer. - + Address 91 Title of Peers Table column which contains the IP/Onion/I2P address of the connected peer. - + Type 97 Title of Peers Table column which describes the type of peer connection. The "type" describes why the connection exists. - + Network 100 Title of Peers Table column which states the network the peer connected through. @@ -2224,12 +2230,12 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Inbound 77 An Inbound Connection from a Peer. - + Outbound 79 An Outbound Connection to a Peer. @@ -2238,7 +2244,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Amount 197 @@ -2246,190 +2252,190 @@ If you are receiving this error you should request the merchant provide a BIP21 - + Enter a Bitcoin address (e.g. %1) 133 - + Ctrl+W 421 - + Unroutable 678 - + IPv4 680 network name Name of IPv4 network in peer info - + IPv6 682 network name Name of IPv6 network in peer info - + Onion 684 network name Name of Tor network in peer info - + I2P 686 network name Name of I2P network in peer info - + CJDNS 688 network name Name of CJDNS network in peer info - + Inbound 702 An inbound connection from a peer. An inbound connection is a connection initiated by a peer. - + Outbound 705 An outbound connection to a peer. An outbound connection is a connection initiated by us. - + Full Relay 710 Peer connection type that relays all network information. - + Block Relay 713 Peer connection type that relays network information about blocks and not transactions or addresses. - + Manual 715 Peer connection type established manually through one of several methods. - + Feeler 717 Short-lived peer connection type that tests the aliveness of known addresses. - + Address Fetch 719 Short-lived peer connection type that solicits known addresses from a peer. - + %1 d 731 743 - + %1 h 732 744 - + %1 m 733 745 - + %1 s 735 746 772 - + None 760 - + N/A 766 - + %1 ms 767 785 - + %n second(s) - + %n second(s) 789 - + %n minute(s) - + %n minute(s) 793 - + %n hour(s) - + %n hour(s) 797 - + %n day(s) - + %n day(s) 801 807 - + %n week(s) - + %n week(s) - + %1 and %2 807 807 - + %n year(s) - + %n year(s) - + %1 B 815 - + %1 kB 817 - ../rpcconsole.cpp1004 - - - %1 MB - 819 ../rpcconsole.cpp1006 + %1 MB + 819 + ../rpcconsole.cpp1008 + + %1 GB 821 @@ -2437,31 +2443,31 @@ If you are receiving this error you should request the merchant provide a BIP21 - + &Save Image… 30 - + &Copy Image 31 - + Resulting URI too long, try to reduce the text for label / message. 42 - + Error encoding URI into QR Code. 49 - + QR code support not available. 90 - + Save QR Code 120 - + PNG Image 123 Expanded name of the PNG file format. See: https://en.wikipedia.org/wiki/Portable_Network_Graphics. @@ -2470,7 +2476,7 @@ If you are receiving this error you should request the merchant provide a BIP21 - + N/A 75 101 @@ -2513,307 +2519,307 @@ If you are receiving this error you should request the merchant provide a BIP21 1714 ../rpcconsole.h147 - + Client version 65 - + &Information 43 - + General 58 - + Datadir 114 - + To specify a non-default location of the data directory use the '%1' option. 124 - + Blocksdir 143 - + To specify a non-default location of the blocks directory use the '%1' option. 153 - + Startup time 172 - + Network 201 1145 - + Name 208 - + Number of connections 231 - + Block chain 260 - + Memory Pool 319 - + Current number of transactions 326 - + Memory usage 349 - + Wallet: 443 - + (none) 454 - + &Reset 665 - + Received 745 1505 - + Sent 825 1482 - + &Peers 866 - + Banned peers 942 - + Select a peer to view detailed information. 1010 - ../rpcconsole.cpp1171 + ../rpcconsole.cpp1173 - + The transport layer version: %1 1090 - + Transport 1093 - + The BIP324 session ID string in hex, if any. 1116 - + Session ID 1119 - + Version 1168 - + Whether we relay transactions to this peer. 1240 - + Transaction Relay 1243 - + Starting Block 1292 - + Synced Headers 1315 - + Synced Blocks 1338 - + Last Transaction 1413 - + The mapped Autonomous System used for diversifying peer selection. 1623 - + Mapped AS 1626 - + Whether we relay addresses to this peer. 1649 Tooltip text for the Address Relay field in the peer details area, which displays whether we relay addresses to this peer (Yes/No). - + Address Relay 1652 Text title for the Address Relay field in the peer details area, which displays whether we relay addresses to this peer (Yes/No). - + The total number of addresses received from this peer that were processed (excludes addresses that were dropped due to rate-limiting). 1675 Tooltip text for the Addresses Processed field in the peer details area, which displays the total number of addresses received from this peer that were processed (excludes addresses that were dropped due to rate-limiting). - + The total number of addresses received from this peer that were dropped (not processed) due to rate-limiting. 1701 Tooltip text for the Addresses Rate-Limited field in the peer details area, which displays the total number of addresses received from this peer that were dropped (not processed) due to rate-limiting. - + Addresses Processed 1678 Text title for the Addresses Processed field in the peer details area, which displays the total number of addresses received from this peer that were processed (excludes addresses that were dropped due to rate-limiting). - + Addresses Rate-Limited 1704 Text title for the Addresses Rate-Limited field in the peer details area, which displays the total number of addresses received from this peer that were dropped (not processed) due to rate-limiting. - + User Agent 88 1191 - + Node window 14 - + Current block height 267 - + Open the %1 debug log file from the current data directory. This can take a few seconds for large log files. 397 - + Decrease font size 475 - + Increase font size 495 - + Permissions 1041 - + The direction and type of peer connection: %1 1064 - + Direction/Type 1067 - + The network protocol this peer is connected through: IPv4, IPv6, Onion, I2P, or CJDNS. 1142 - + Services 1214 - + High bandwidth BIP152 compact block relay: %1 1266 - + High Bandwidth 1269 - + Connection Time 1361 - + Elapsed time since a novel block passing initial validity checks was received from this peer. 1384 - + Last Block 1387 - + Elapsed time since a novel transaction accepted into our mempool was received from this peer. 1410 Tooltip text for the Last Transaction field in the peer details area. - + Last Send 1436 - + Last Receive 1459 - + Ping Time 1528 - + The duration of a currently outstanding ping. 1551 - + Ping Wait 1554 - + Min Ping 1577 - + Time Offset 1600 - + Last block time 290 - + &Open 400 - + &Console 426 - + &Network Traffic 613 - + Totals 681 - + Debug log file 390 - + Clear console 515 @@ -2821,154 +2827,158 @@ If you are receiving this error you should request the merchant provide a BIP21 - - In: - 968 - - Out: - 969 + In: + 970 + Out: + 971 + + Inbound: initiated by peer 496 Explanatory text for an inbound peer connection. - + Outbound Full Relay: default 500 Explanatory text for an outbound peer connection that relays all network information. This is the default behavior for outbound connections. - + Outbound Block Relay: does not relay transactions or addresses 503 Explanatory text for an outbound peer connection that relays network information about blocks and not transactions or addresses. - + Outbound Manual: added using RPC %1 or %2/%3 configuration options 508 Explanatory text for an outbound peer connection that was established manually through one of several methods. The numbered arguments are stand-ins for the methods available to establish manual connections. - + Outbound Feeler: short-lived, for testing addresses 514 Explanatory text for a short-lived outbound peer connection that is used to test the aliveness of known addresses. - + Outbound Address Fetch: short-lived, for soliciting addresses 517 Explanatory text for a short-lived outbound peer connection that is used to request addresses from a peer. - + detecting: peer could be v1 or v2 522 Explanatory text for "detecting" transport type. - + v1: unencrypted, plaintext transport protocol 524 Explanatory text for v1 transport type. - + v2: BIP324 encrypted transport protocol 526 Explanatory text for v2 transport type. - + we selected the peer for high bandwidth relay 530 - + the peer selected us for high bandwidth relay 531 - + no high bandwidth relay selected 532 - + Ctrl++ 545 Main shortcut to increase the RPC console font size. - + Ctrl+= 547 Secondary shortcut to increase the RPC console font size. - + Ctrl+- 551 Main shortcut to decrease the RPC console font size. - + Ctrl+_ 553 Secondary shortcut to decrease the RPC console font size. - + &Copy address - 704 + 706 Context menu action to copy the address of a peer. - - &Disconnect - 708 - - 1 &hour - 709 - - - 1 d&ay + &Disconnect 710 - - 1 &week + + 1 &hour 711 - - 1 &year + + 1 d&ay 712 + + 1 &week + 713 + - &Copy IP/Netmask - 738 - Context menu action to copy the IP/Netmask of a banned peer. IP/Netmask is the combination of a peer's IP address and its Netmask. For IP address, see: https://en.wikipedia.org/wiki/IP_address. + 1 &year + 714 - &Unban - 742 + &Copy IP/Netmask + 740 + Context menu action to copy the IP/Netmask of a banned peer. IP/Netmask is the combination of a peer's IP address and its Netmask. For IP address, see: https://en.wikipedia.org/wiki/IP_address. - Network activity disabled - 972 + &Unban + 744 - Executing command without any wallet - 1051 + Network activity disabled + 974 - Ctrl+I - 1376 + Executing command without any wallet + 1053 - Ctrl+T - 1377 - - - Ctrl+N + Ctrl+I 1378 - - Ctrl+P + + Ctrl+T 1379 + + Ctrl+N + 1380 + - Executing command using "%1" wallet - 1049 + Ctrl+P + 1381 + Node window - [%1] + 1399 + + + Executing command using "%1" wallet + 1051 + + Welcome to the %1 RPC console. Use up and down arrows to navigate history, and %2 to clear screen. Use %3 and %4 to increase or decrease the font size. @@ -2976,51 +2986,51 @@ Type %5 for an overview of available commands. For more information on using this console, type %6. %7WARNING: Scammers have been active, telling users to type commands here, stealing their wallet contents. Do not use this console without fully understanding the ramifications of a command.%8 - 902 + 904 RPC console welcome message. Placeholders %7 and %8 are style tags for the warning content, and they are not space separated from the rest of the text intentionally. - + Executing… - 1059 + 1061 A console message indicating an entered command is currently being executed. - + (peer: %1) - 1177 - - - via %1 1179 + + via %1 + 1181 + - + Yes 146 - + No 146 - + To 146 - + From 146 - + Ban for 147 - + Never 189 - + Unknown 147 @@ -3028,72 +3038,72 @@ For more information on using this console, type %6. - + &Amount: 37 - + &Label: 83 - + &Message: 53 - + An optional message to attach to the payment request, which will be displayed when the request is opened. Note: The message will not be sent with the payment over the Bitcoin network. 50 - + An optional label to associate with the new receiving address. 80 - + Use this form to request payments. All fields are <b>optional</b>. 73 - + An optional amount to request. Leave this empty or zero to not request a specific amount. 34 193 - + An optional label to associate with the new receiving address (used by you to identify an invoice). It is also attached to the payment request. 66 - + An optional message that is attached to the payment request and may be displayed to the sender. 96 - + &Create new receiving address 111 - + Clear all fields of the form. 134 - + Clear 137 - + Requested payments history 273 - + Show the selected request (does the same as double clicking an entry) 298 - + Show 301 - + Remove the selected entries from the list 318 - + Remove 321 @@ -3101,63 +3111,63 @@ For more information on using this console, type %6. - + Copy &URI 46 - + &Copy address 47 - + Copy &label 48 - + Copy &message 49 - + Copy &amount 50 - + Base58 (Legacy) 96 - + Not recommended due to higher fees and less protection against typos. 96 - + Base58 (P2SH-SegWit) 97 - + Generates an address compatible with older wallets. 97 - + Bech32 (SegWit) 98 - + Generates a native segwit address (BIP-173). Some old wallets don't support it. 98 - + Bech32m (Taproot) 100 - + Bech32m (BIP-350) is an upgrade to Bech32, wallet support is still limited. 100 - + Could not unlock wallet. 175 - + Could not generate new %1 address 180 @@ -3165,51 +3175,51 @@ For more information on using this console, type %6. - + Request payment to … 14 - + Address: 90 - + Amount: 119 - + Label: 148 - + Message: 180 - + Wallet: 212 - + Copy &URI 240 - + Copy &Address 250 - + &Verify 260 - + Verify this address on e.g. a hardware wallet screen 263 - + &Save Image… 273 - + Payment information 39 @@ -3217,7 +3227,7 @@ For more information on using this console, type %6. - + Request payment to %1 48 @@ -3225,31 +3235,31 @@ For more information on using this console, type %6. - + Date 32 - + Label 32 - + Message 32 - + (no label) 70 - + (no message) 79 - + (no amount requested) 87 - + Requested 130 @@ -3257,150 +3267,150 @@ For more information on using this console, type %6. - + Send Coins 14 ../sendcoinsdialog.cpp762 - + Coin Control Features 90 - + automatically selected 120 - + Insufficient funds! 139 - + Quantity: 231 - + Bytes: 266 - + Amount: 314 - + Fee: 365 - + After Fee: 419 - + Change: 451 - + If this is activated, but the change address is empty or invalid, change will be sent to a newly generated address. 495 - + Custom change address 498 - + Transaction Fee: 704 - + Using the fallbackfee can result in sending a transaction that will take several hours or days (or never) to confirm. Consider choosing your fee manually or wait until you have validated the complete chain. 742 - + Warning: Fee estimation is currently not possible. 751 - + per kilobyte 833 - + Hide 780 - + Recommended: 892 - + Custom: 922 - + Send to multiple recipients at once 1137 - + Add &Recipient 1140 - + Clear all fields of the form. 1120 - + Inputs… 110 - + Choose… 718 - + Hide transaction fee settings 777 - + Specify a custom fee per kB (1,000 bytes) of the transaction's virtual size. Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 satoshis per kvB" for a transaction size of 500 virtual bytes (half of 1 kvB) would ultimately yield a fee of only 50 satoshis. 828 - + When there is less transaction volume than space in the blocks, miners as well as relaying nodes may enforce a minimum fee. Paying only this minimum fee is just fine, but be aware that this can result in a never confirming transaction once there is more demand for bitcoin transactions than the network can process. 863 - + A too low fee might result in a never confirming transaction (read the tooltip) 866 - + (Smart fee not initialized yet. This usually takes a few blocks…) 971 - + Confirmation time target: 997 - + Enable Replace-By-Fee 1055 - + With Replace-By-Fee (BIP-125) you can increase a transaction's fee after it is sent. Without this, a higher fee may be recommended to compensate for increased transaction delay risk. 1058 - + Clear &All 1123 - + Balance: 1178 - + Confirm the send action 1094 - + S&end 1097 @@ -3408,231 +3418,231 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + Copy quantity 95 - + Copy amount 96 - + Copy fee 97 - + Copy after fee 98 - + Copy bytes 99 - + Copy change 100 - + %1 (%2 blocks) 172 - + Sign on device 202 "device" usually means a hardware wallet. - + Connect your hardware wallet first. 205 - + Set external signer script path in Options -> Wallet 209 "External signer" means using devices such as hardware wallets. - + Cr&eate Unsigned 212 - + Creates a Partially Signed Bitcoin Transaction (PSBT) for use with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet. 213 - + %1 to '%2' 316 - + %1 to %2 321 - + To review recipient list click "Show Details…" 388 - + Sign failed 450 - + External signer not found 455 "External signer" means using devices such as hardware wallets. - + External signer failure 461 "External signer" means using devices such as hardware wallets. - + Save Transaction Data 425 - + Partially Signed Transaction (Binary) 427 Expanded name of the binary PSBT file format. See: BIP 174. - + PSBT saved 435 Popup message when a PSBT has been saved to a file - + External balance: 708 - + or 384 - + You can increase the fee later (signals Replace-By-Fee, BIP-125). 366 - + Please, review your transaction proposal. This will produce a Partially Signed Bitcoin Transaction (PSBT) which you can save or copy and then sign with e.g. an offline %1 wallet, or a PSBT-compatible hardware wallet. 335 Text to inform a user attempting to create a transaction of their current options. At this stage, a user can only create a PSBT. This string is displayed when private keys are disabled and an external signer is not available. - + %1 from wallet '%2' 305 - + Do you want to create this transaction? 329 Message displayed when attempting to create a transaction. Cautionary text to prompt the user to verify that the displayed transaction details represent the transaction the user intends to create. - + Please, review your transaction. You can create and send this transaction or create a Partially Signed Bitcoin Transaction (PSBT), which you can save or copy and then sign with, e.g., an offline %1 wallet, or a PSBT-compatible hardware wallet. 340 Text to inform a user attempting to create a transaction of their current options. At this stage, a user can send their transaction or create a PSBT. This string is displayed when both private keys and PSBT controls are enabled. - + Please, review your transaction. 343 Text to prompt a user to review the details of the transaction they are attempting to send. - + Transaction fee 351 - + %1 kvB 356 PSBT transaction creation When reviewing a newly created PSBT (via Send flow), the transaction fee is shown, with "virtual size" of the transaction displayed for context - + Not signalling Replace-By-Fee, BIP-125. 368 - + Total Amount 381 - + Unsigned Transaction 405 PSBT copied Caption of "PSBT has been copied" messagebox - + The PSBT has been copied to the clipboard. You can also save it. 406 - + PSBT saved to disk 435 - + Confirm send coins 484 - + Watch-only balance: 711 - + The recipient address is not valid. Please recheck. 735 - + The amount to pay must be larger than 0. 738 - + The amount exceeds your balance. 741 - + The total exceeds your balance when the %1 transaction fee is included. 744 - + Duplicate address found: addresses should only be used once each. 747 - + Transaction creation failed! 750 - + A fee higher than %1 is considered an absurdly high fee. 754 - + %1/kvB 833 868 882 - + Estimated to begin confirmation within %n block(s). - + Estimated to begin confirmation within %n block(s). - + Warning: Invalid Bitcoin address 977 - + Warning: Unknown change address 982 - + Confirm custom change address 985 - + The address you selected for change is not part of this wallet. Any or all funds in your wallet may be sent to this address. Are you sure? 985 - + (no label) 1006 @@ -3640,68 +3650,68 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + A&mount: 151 - + Pay &To: 35 - + &Label: 128 - + Choose previously used address 60 - + The Bitcoin address to send the payment to 53 - + Alt+A 76 - + Paste address from clipboard 83 - + Alt+P 99 - + Remove this entry 106 - + The amount to send in the selected unit 166 - + The fee will be deducted from the amount being sent. The recipient will receive less bitcoins than you enter in the amount field. If multiple recipients are selected, the fee is split equally. 173 - + S&ubtract fee from amount 176 - + Use available balance 183 - + Message: 192 - + Enter a label for this address to add it to the list of used addresses 141 144 - + A message that was attached to the bitcoin: URI which will be stored with the transaction for your reference. Note: This message will not be sent over the Bitcoin network. 202 @@ -3709,11 +3719,11 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + Send 146 - + Create Unsigned 148 @@ -3721,105 +3731,105 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + Signatures - Sign / Verify a Message 14 - + &Sign Message 27 - + You can sign messages/agreements with your addresses to prove you can receive bitcoins sent to them. Be careful not to sign anything vague or random, as phishing attacks may try to trick you into signing your identity over to them. Only sign fully-detailed statements you agree to. 33 - + The Bitcoin address to sign the message with 51 - + Choose previously used address 58 274 - + Alt+A 68 284 - + Paste address from clipboard 78 - + Alt+P 88 - + Enter the message you want to sign here 100 103 - + Signature 110 - + Copy the current signature to the system clipboard 140 - + Sign the message to prove you own this Bitcoin address 161 - + Sign &Message 164 - + Reset all sign message fields 178 - + Clear &All 181 338 - + &Verify Message 240 - + Enter the receiver's address, message (ensure you copy line breaks, spaces, tabs, etc. exactly) and signature below to verify the message. Be careful not to read more into the signature than what is in the signed message itself, to avoid being tricked by a man-in-the-middle attack. Note that this only proves the signing party receives with the address, it cannot prove sendership of any transaction! 246 - + The Bitcoin address the message was signed with 267 - + The signed message to verify 296 299 - + The signature given when the message was signed 306 309 - + Verify the message to ensure it was signed with the specified Bitcoin address 318 - + Verify &Message 321 - + Reset all verify message fields 335 - + Click "Sign Message" to generate signature 125 @@ -3827,61 +3837,61 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + The entered address is invalid. 119 218 - + Please check the address and try again. 119 126 219 226 - + The entered address does not refer to a key. 126 225 - + Wallet unlock was cancelled. 134 - + No error 145 - + Private key for the entered address is not available. 148 - + Message signing failed. 151 - + Message signed. 163 - + The signature could not be decoded. 232 - + Please check the signature and try again. 233 240 - + The signature did not match the message digest. 239 - + Message verification failed. 245 - + Message verified. 213 @@ -3889,11 +3899,11 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + (press q to shutdown and continue later) 177 - + press q to shutdown 178 @@ -3901,7 +3911,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + kB/s 74 @@ -3909,84 +3919,84 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + conflicted with a transaction with %1 confirmations 44 Text explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents an unconfirmed transaction that conflicts with a confirmed transaction. - + 0/unconfirmed, in memory pool 51 Text explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents an unconfirmed transaction that is in the memory pool. - + 0/unconfirmed, not in memory pool 56 Text explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents an unconfirmed transaction that is not in the memory pool. - + abandoned 62 Text explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents an abandoned transaction. - + %1/unconfirmed 70 Text explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents a transaction confirmed in at least one block, but less than 6 blocks. - + %1 confirmations 75 Text explaining the current status of a transaction, shown in the status field of the details window for this transaction. This status represents a transaction confirmed in 6 or more blocks. - + Status 125 - + Date 128 - + Source 135 - + Generated 135 - + From 140 154 226 - + unknown 154 - + To 155 175 245 - + own address 157 252 - + watch-only 157 226 254 - + label 159 - + Credit 195 207 @@ -3996,98 +4006,98 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 197 - + matures in %n more block(s) - + matures in %n more block(s) - + not accepted 199 - + Debit 259 285 348 - + Total debit 269 - + Total credit 270 - + Transaction fee 275 - + Net amount 297 - + Message 303 315 - + Comment 305 - + Transaction ID 307 - + Transaction total size 308 - + Transaction virtual size 309 - + Output index 310 - + %1 (Certificate was not verified) 326 - + Merchant 329 - + Generated coins must mature %1 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours. 337 - + Debug information 345 - + Transaction 353 - + Inputs 356 - + Amount 375 - + true 376 377 - + false 376 377 @@ -4096,7 +4106,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + This pane shows a detailed description of the transaction 20 @@ -4104,7 +4114,7 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + Details for %1 18 @@ -4112,95 +4122,95 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + Date 258 - + Type 258 - + Label 258 - + Unconfirmed 318 - + Abandoned 321 - + Confirming (%1 of %2 recommended confirmations) 324 - + Confirmed (%1 confirmations) 327 - + Conflicted 330 - + Immature (%1 confirmations, will be available after %2) 333 - + Generated but not accepted 336 - + Received with 375 - + Received from 377 - + Sent to 380 - + Mined 382 - + watch-only 410 - + (n/a) 424 - + (no label) 629 - + Transaction status. Hover over this field to show number of confirmations. 668 - + Date and time that the transaction was received. 670 - + Type of transaction. 672 - + Whether or not a watch-only address is involved in this transaction. 674 - + User-defined intent/purpose of the transaction. 676 - + Amount removed from or added to balance. 678 @@ -4208,162 +4218,162 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + All 73 89 - + Today 74 - + This week 75 - + This month 76 - + Last month 77 - + This year 78 - + Received with 90 - + Sent to 92 - + Mined 94 - + Other 95 - + Enter address, transaction id, or label to search 100 - + Min amount 104 - + Range… 79 - + &Copy address 168 - + Copy &label 169 - + Copy &amount 170 - + Copy transaction &ID 171 - + Copy &raw transaction 172 - + Copy full transaction &details 173 - + &Show transaction details 174 - + Increase transaction &fee 176 - + A&bandon transaction 179 - + &Edit address label 180 - + Show in %1 239 Transactions table context menu action to show the selected transaction in a third-party block explorer. %1 is a stand-in argument for the URL of the explorer. - + Export Transaction History 358 - + Comma separated file 361 Expanded name of the CSV file format. See: https://en.wikipedia.org/wiki/Comma-separated_values. - + Confirmed 370 - + Watch-only 372 - + Date 373 - + Type 374 - + Label 375 - + Address 376 - + ID 378 - + Exporting Failed 381 - + There was an error trying to save the transaction history to %1. 381 - + Exporting Successful 385 - + The transaction history was successfully saved to %1. 385 - + Range: 558 - + to 566 @@ -4371,39 +4381,39 @@ Note: Since the fee is calculated on a per-byte basis, a fee rate of "100 - + No wallet has been loaded. Go to File > Open Wallet to load a wallet. - OR - 45 - + Create a new wallet 50 - + Error 201 211 229 - + Unable to decode PSBT from clipboard (invalid base64) 201 - + Load Transaction Data 207 - + Partially Signed Transaction (*.psbt) 208 - + PSBT file must be smaller than 100 MiB 211 - + Unable to decode PSBT 229 @@ -4411,114 +4421,114 @@ Go to File > Open Wallet to load a wallet. - + Send Coins 227 240 - - Fee bump error - 487 - 542 - 557 - 562 - - - Increasing transaction fee failed - 487 - - Do you want to increase the fee? + Fee bump error 494 - Asks a user if they would like to manually increase the fee of a transaction that has already been created. + 549 + 564 + 569 - Current fee: - 498 + Increasing transaction fee failed + 494 - Increase: - 502 + Do you want to increase the fee? + 501 + Asks a user if they would like to manually increase the fee of a transaction that has already been created. - New fee: - 506 + Current fee: + 505 - Warning: This may pay the additional fee by reducing change outputs or adding inputs, when necessary. It may add a new change output if one does not already exist. These changes may potentially leak privacy. - 514 + Increase: + 509 - Confirm fee bump - 519 + New fee: + 513 - Can't draft transaction. - 542 + Warning: This may pay the additional fee by reducing change outputs or adding inputs, when necessary. It may add a new change output if one does not already exist. These changes may potentially leak privacy. + 521 - PSBT copied - 549 + Confirm fee bump + 526 - Copied to clipboard + Can't draft transaction. 549 - Fee-bump PSBT saved - Can't sign transaction. - 557 + PSBT copied + 556 - Could not commit transaction - 562 + Copied to clipboard + 556 + Fee-bump PSBT saved - Can't display address - 576 + Can't sign transaction. + 564 + Could not commit transaction + 569 + + + Can't display address + 583 + + default wallet - 594 + 601 - + &Export 50 - + Export the data in the current tab to a file 51 - + Backup Wallet 214 - + Wallet Data 216 Name of the wallet data file format. - + Backup Failed 222 - + There was an error trying to save the wallet data to %1. 222 - + Backup Successful 226 - + The wallet data was successfully saved to %1. 226 - + Cancel 263 @@ -4526,318 +4536,318 @@ Go to File > Open Wallet to load a wallet. - + The %s developers 12 - + %s corrupt. Try using the wallet tool bitcoin-wallet to salvage or restoring a backup. 13 - + %s failed to validate the -assumeutxo snapshot state. This indicates a hardware problem, or a bug in the software, or a bad software modification that allowed an invalid snapshot to be loaded. As a result of this, the node will shut down and stop using any state that was built on the snapshot, resetting the chain height from %d to %d. On the next restart, the node will resume syncing from %d without using any snapshot data. Please report this incident to %s, including how you obtained the snapshot. The invalid snapshot chainstate will be left on disk in case it is helpful in diagnosing the issue that caused this error. 16 - + %s request to listen on port %u. This port is considered "bad" and thus it is unlikely that any peer will connect to it. See doc/p2p-bad-ports.md for details and a full list. 28 - + Cannot downgrade wallet from version %i to version %i. Wallet version unchanged. 32 - + Cannot obtain a lock on data directory %s. %s is probably already running. 35 - + Cannot upgrade a non HD split wallet from version %i to version %i without upgrading to support pre-split keypool. Please use version %i or no version specified. 40 - + Disk space for %s may not accommodate the block files. Approximately %u GB of data will be stored in this directory. 44 - + Distributed under the MIT software license, see the accompanying file %s or %s 47 - + Error loading wallet. Wallet requires blocks to be downloaded, and software does not currently support loading wallets while blocks are being downloaded out of order when using assumeutxo snapshots. Wallet should be able to load successfully after node sync reaches height %s 53 - + Error reading %s! Transaction data may be missing or incorrect. Rescanning wallet. 61 - + Error: Dumpfile format record is incorrect. Got "%s", expected "format". 67 - + Error: Dumpfile identifier record is incorrect. Got "%s", expected "%s". 69 - + Error: Dumpfile version is not supported. This version of bitcoin-wallet only supports version 1 dumpfiles. Got dumpfile with version %s 71 - + Error: Legacy wallets only support the "legacy", "p2sh-segwit", and "bech32" address types 77 - + Error: Unable to produce descriptors for this legacy wallet. Make sure to provide the wallet's passphrase if it is encrypted. 83 - + File %s already exists. If you are sure this is what you want, move it out of the way first. 95 - + Invalid or corrupt peers.dat (%s). If you believe this is a bug, please report it to %s. As a workaround, you can move the file (%s) out of the way (rename, move, or delete) to have a new one created on the next start. 104 - + More than one onion bind address is provided. Using %s for the automatically created Tor onion service. 108 - + No dump file provided. To use createfromdump, -dumpfile=<filename> must be provided. 111 - + No dump file provided. To use dump, -dumpfile=<filename> must be provided. 114 - + No wallet file format provided. To use createfromdump, -format=<format> must be provided. 116 - + Please check that your computer's date and time are correct! If your clock is wrong, %s will not work properly. 132 - + Please contribute if you find %s useful. Visit %s for further information about the software. 135 - + Prune configured below the minimum of %d MiB. Please use a higher number. 138 - + Prune mode is incompatible with -reindex-chainstate. Use full -reindex instead. 140 - + Prune: last wallet synchronisation goes beyond pruned data. You need to -reindex (download the whole blockchain again in case of pruned node) 143 - + Rename of '%s' -> '%s' failed. You should resolve this by manually moving or deleting the invalid snapshot directory %s, otherwise you will encounter the same error again on the next startup. 146 - + SQLiteDatabase: Unknown sqlite wallet schema version %d. Only version %d is supported 150 - + The block database contains a block which appears to be from the future. This may be due to your computer's date and time being set incorrectly. Only rebuild the block database if you are sure that your computer's date and time are correct 153 - + The transaction amount is too small to send after the fee has been deducted 165 - + This error could occur if this wallet was not shutdown cleanly and was last loaded using a build with a newer version of Berkeley DB. If so, please use the software that last loaded this wallet 167 - + This is a pre-release test build - use at your own risk - do not use for mining or merchant applications 171 - + This is the maximum transaction fee you pay (in addition to the normal fee) to prioritize partial spend avoidance over regular coin selection. 174 - + This is the transaction fee you may discard if change is smaller than dust at this level 177 - + This is the transaction fee you may pay when fee estimates are not available. 180 - + Total length of network version string (%i) exceeds maximum length (%i). Reduce the number or size of uacomments. 182 - + Unable to replay blocks. You will need to rebuild the database using -reindex-chainstate. 191 - + Unknown wallet file format "%s" provided. Please provide one of "bdb" or "sqlite". 201 - + Unsupported category-specific logging level %1$s=%2$s. Expected %1$s=<category>:<loglevel>. Valid categories: %3$s. Valid loglevels: %4$s. 209 - + Unsupported chainstate database format found. Please restart with -reindex-chainstate. This will rebuild the chainstate database. 212 - + Wallet created successfully. The legacy wallet type is being deprecated and support for creating and opening legacy wallets will be removed in the future. 215 - + Wallet loaded successfully. The legacy wallet type is being deprecated and support for creating and opening legacy wallets will be removed in the future. Legacy wallets can be migrated to a descriptor wallet with migratewallet. 219 - + Warning: Dumpfile wallet format "%s" does not match command line specified format "%s". 224 - + Warning: Private keys detected in wallet {%s} with disabled private keys 227 - + Warning: We do not appear to fully agree with our peers! You may need to upgrade, or other nodes may need to upgrade. 229 - + Witness data for blocks after height %d requires validation. Please restart with -reindex. 232 - + You need to rebuild the database using -reindex to go back to unpruned mode. This will redownload the entire blockchain 235 - + %s is set very high! 244 - + -maxmempool must be at least %d MB 245 - + A fatal internal error occurred, see debug.log for details 246 - + Cannot resolve -%s address: '%s' 248 - + Cannot set -forcednsseed to true when setting -dnsseed to false. 249 - + Cannot set -peerblockfilters without -blockfilterindex. 250 - + Cannot write to data directory '%s'; check permissions. 251 - + %s is set very high! Fees this large could be paid on a single transaction. 26 - + Cannot provide specific connections and have addrman find outgoing connections at the same time. 37 - + Error loading %s: External signer wallet being loaded without external signer support compiled 50 - + Error reading %s! All keys read correctly, but transaction data or address metadata may be missing or incorrect. 58 - + Error: Address book data in wallet cannot be identified to belong to migrated wallets 64 - + Error: Duplicate descriptors created during migration. Your wallet may be corrupted. 74 - + Error: Transaction %s in wallet cannot be identified to belong to migrated wallets 80 - + Failed to calculate bump fees, because unconfirmed UTXOs depend on enormous cluster of unconfirmed transactions. 86 - + Failed to rename invalid peers.dat file. Please move or delete it and try again. 89 - + Fee estimation failed. Fallbackfee is disabled. Wait a few blocks or enable %s. 92 - + Incompatible options: -dnsseed=1 was explicitly specified, but -onlynet forbids connections to IPv4/IPv6 98 - + Invalid amount for %s=<amount>: '%s' (must be at least the minrelay fee of %s to prevent stuck transactions) 101 - + Outbound connections restricted to CJDNS (-onlynet=cjdns) but -cjdnsreachable is not provided 119 - + Outbound connections restricted to Tor (-onlynet=onion) but the proxy for reaching the Tor network is explicitly forbidden: -onion=0 122 - + Outbound connections restricted to Tor (-onlynet=onion) but the proxy for reaching the Tor network is not provided: none of -proxy, -onion or -listenonion is given 125 - + Outbound connections restricted to i2p (-onlynet=i2p) but -i2psam is not provided 129 - + The inputs size exceeds the maximum weight. Please try sending a smaller amount or manually consolidating your wallet's UTXOs 158 - + The preselected coins total amount does not cover the transaction target. Please allow other inputs to be automatically selected or include more coins manually 161 - + Transaction requires one destination of non-0 value, a non-0 feerate, or a pre-selected input 185 - + UTXO snapshot failed to validate. Restart to resume normal initial block download, or try loading a different snapshot. 188 - + Unconfirmed UTXOs are available, but spending them creates a chain of transactions that will be rejected by the mempool 194 - + Unexpected legacy entry in descriptor wallet found. Loading wallet %s The wallet might have been tampered with or created with malicious intent. 197 - + Unrecognized descriptor found. Loading wallet %s The wallet might had been created on a newer version. @@ -4845,564 +4855,584 @@ Please try running the latest software version. 204 - + Unable to cleanup failed migration 238 - + Unable to restore backup of wallet. 241 - + Block verification was interrupted 247 - + Config setting for %s only applied on %s network when in [%s] section. 252 - + Copyright (C) %i-%i 253 - + Corrupted block database detected 254 - + Could not find asmap file %s 255 - + Could not parse asmap file %s 256 - + Disk space is too low! 257 - + Do you want to rebuild the block database now? 258 - + Done loading 259 - + Dump file %s does not exist. 260 - - Error creating %s + + Error committing db txn for wallet transactions removal 261 - - Error initializing block database + + Error creating %s 262 - - Error initializing wallet database environment %s! + + Error initializing block database 263 - - Error loading %s + + Error initializing wallet database environment %s! 264 - - Error loading %s: Private keys can only be disabled during creation + + Error loading %s 265 - - Error loading %s: Wallet corrupted + + Error loading %s: Private keys can only be disabled during creation 266 - - Error loading %s: Wallet requires newer version of %s + + Error loading %s: Wallet corrupted 267 - - Error loading block database + + Error loading %s: Wallet requires newer version of %s 268 - - Error opening block database + + Error loading block database 269 - - Error reading configuration file: %s + + Error opening block database 270 - - Error reading from database, shutting down. + + Error reading configuration file: %s 271 - - Error reading next record from wallet database + + Error reading from database, shutting down. 272 - - Error: Cannot extract destination from the generated scriptpubkey + + Error reading next record from wallet database 273 - - Error: Could not delete watchonly transactions - 275 - - - Error: Couldn't create cursor into database - 276 - - Error: Disk space is low for %s - 277 - - - Error: Dumpfile checksum does not match. Computed %s, expected %s - 278 - - - Error: Failed to create new watchonly wallet - 279 - - - Error: Got key that was not hex: %s - 280 - - - Error: Got value that was not hex: %s - 281 - - - Error: Keypool ran out, please call keypoolrefill first - 282 - - - Error: Missing checksum - 283 - - - Error: No %s addresses available. - 284 - - - Error: Not all watchonly txs could be deleted - 285 - - - Error: This wallet already uses SQLite - 286 - - - Error: This wallet is already a descriptor wallet - 287 - - - Error: Unable to begin reading all records in the database - 288 - - - Error: Unable to make a backup of your wallet - 289 - - - Error: Unable to parse version %u as a uint32_t - 290 - - - Error: Unable to read all records in the database - 291 - - - Error: Unable to read wallet's best block locator record - 292 - - - Error: Unable to remove watchonly address book data - 293 - - - Error: Unable to write record to new wallet - 294 - - - Error: Unable to write solvable wallet best block locator record - 295 - - - Error: Unable to write watchonly wallet best block locator record - 296 - - - Failed to listen on any port. Use -listen=0 if you want this. - 297 - - - Failed to rescan the wallet during initialization - 298 - - - Failed to start indexes, shutting down.. - 299 - - - Failed to verify database - 300 - - - Fee rate (%s) is lower than the minimum fee rate setting (%s) - 301 - - - Ignoring duplicate -wallet %s. - 302 - - - Importing… - 303 - - - Incorrect or no genesis block found. Wrong datadir for network? - 304 - - - Initialization sanity check failed. %s is shutting down. - 305 - - - Input not found or already spent - 306 - - - Insufficient dbcache for block verification - 307 - - - Insufficient funds - 308 - - - Invalid -i2psam address or hostname: '%s' - 309 - - - Invalid -onion address or hostname: '%s' - 310 - - - Invalid -proxy address or hostname: '%s' - 311 - - - Invalid P2P permission: '%s' - 312 - - - Invalid amount for %s=<amount>: '%s' (must be at least %s) - 313 - - - Invalid amount for %s=<amount>: '%s' - 314 - - - Invalid amount for -%s=<amount>: '%s' - 315 - - - Invalid netmask specified in -whitelist: '%s' - 316 - - - Invalid port specified in %s: '%s' - 317 - - - Invalid pre-selected input %s - 318 - - - Listening for incoming connections failed (listen returned error %s) - 319 - - - Loading P2P addresses… - 320 - - - Loading banlist… - 321 - - - Loading block index… - 322 - - - Loading wallet… - 323 - - - Missing amount - 324 - - - Missing solving data for estimating transaction size - 325 - - - Need to specify a port with -whitebind: '%s' - 326 - - - No addresses available - 327 - - - Not enough file descriptors available. - 328 - - - Not found pre-selected input %s - 329 - - - Not solvable pre-selected input %s - 330 - - - Prune cannot be configured with a negative value. - 331 - - - Prune mode is incompatible with -txindex. - 332 - - - Pruning blockstore… - 333 - - - Reducing -maxconnections from %d to %d, because of system limitations. - 334 - - - Replaying blocks… - 335 - - - Rescanning… - 336 - - - SQLiteDatabase: Failed to execute statement to verify database: %s - 337 - - - SQLiteDatabase: Failed to prepare statement to verify database: %s - 338 - - - SQLiteDatabase: Failed to read database verification error: %s - 339 - - - SQLiteDatabase: Unexpected application id. Expected %u, got %u - 340 - - - Section [%s] is not recognized. - 341 - - - Signing transaction failed - 344 - - - Specified -walletdir "%s" does not exist - 345 - - - Specified -walletdir "%s" is a relative path - 346 - - - Specified -walletdir "%s" is not a directory - 347 - - - Specified blocks directory "%s" does not exist. - 348 - - - Specified data directory "%s" does not exist. - 349 - - - Starting network threads… - 350 - - - The source code is available from %s. - 351 - - - The specified config file %s does not exist - 352 - - - The transaction amount is too small to pay the fee - 353 - - - The wallet will avoid paying less than the minimum relay fee. - 354 - - - This is experimental software. - 355 - - - This is the minimum transaction fee you pay on every transaction. - 356 - - - This is the transaction fee you will pay if you send a transaction. - 357 - - - Transaction amount too small - 358 - - - Transaction amounts must not be negative - 359 - - - Transaction change output index out of range - 360 - - - Transaction must have at least one recipient - 361 - - - Transaction needs a change address, but we can't generate it. - 362 - - - Transaction too large - 363 - - - Unable to allocate memory for -maxsigcachesize: '%s' MiB - 364 - - - Unable to bind to %s on this computer (bind returned error %s) - 365 - - - Unable to bind to %s on this computer. %s is probably already running. - 366 - - - Unable to create the PID file '%s': %s - 367 - - - Unable to find UTXO for external input - 368 - - - Unable to generate initial keys - 369 - - - Unable to generate keys - 370 - - - Unable to open %s for writing - 371 - - - Unable to parse -maxuploadtarget: '%s' - 372 - - - Unable to start HTTP server. See debug log for details. - 373 - - - Unable to unload the wallet before migrating - 374 - - - Unknown -blockfilterindex value %s. - 375 - - - Unknown address type '%s' - 376 - - - Unknown change type '%s' - 377 - - - Unknown network specified in -onlynet: '%s' - 378 - - - Unknown new rules activated (versionbit %i) - 379 - - - Unsupported global logging level %s=%s. Valid values: %s. - 380 - - - Wallet file creation failed: %s - 385 - - - acceptstalefeeestimates is not supported on %s chain. - 387 - - - Unsupported logging category %s=%s. - 381 - - - Error: Could not add watchonly tx %s to watchonly wallet + Error starting db txn for wallet transactions removal 274 - - User Agent comment (%s) contains unsafe characters. - 382 + + Error: Cannot extract destination from the generated scriptpubkey + 275 - - Verifying blocks… - 383 + + Error: Couldn't create cursor into database + 278 - - Verifying wallet(s)… - 384 + + Error: Disk space is low for %s + 279 - - Wallet needed to be rewritten: restart %s to complete - 386 + + Error: Dumpfile checksum does not match. Computed %s, expected %s + 280 - - Settings file could not be read + + Error: Failed to create new watchonly wallet + 281 + + + Error: Got key that was not hex: %s + 282 + + + Error: Got value that was not hex: %s + 283 + + + Error: Keypool ran out, please call keypoolrefill first + 284 + + + Error: Missing checksum + 285 + + + Error: No %s addresses available. + 286 + + + Error: This wallet already uses SQLite + 287 + + + Error: This wallet is already a descriptor wallet + 288 + + + Error: Unable to begin reading all records in the database + 289 + + + Error: Unable to make a backup of your wallet + 290 + + + Error: Unable to parse version %u as a uint32_t + 291 + + + Error: Unable to read all records in the database + 292 + + + Error: Unable to read wallet's best block locator record + 293 + + + Error: Unable to remove watchonly address book data + 294 + + + Error: Unable to write record to new wallet + 295 + + + Error: Unable to write solvable wallet best block locator record + 296 + + + Error: Unable to write watchonly wallet best block locator record + 297 + + + Error: address book copy failed for wallet %s + 298 + + + Error: database transaction cannot be executed for wallet %s + 299 + + + Failed to listen on any port. Use -listen=0 if you want this. + 300 + + + Failed to rescan the wallet during initialization + 301 + + + Failed to start indexes, shutting down.. + 302 + + + Failed to verify database + 303 + + + Failure removing transaction: %s + 304 + + + Fee rate (%s) is lower than the minimum fee rate setting (%s) + 305 + + + Ignoring duplicate -wallet %s. + 306 + + + Importing… + 307 + + + Incorrect or no genesis block found. Wrong datadir for network? + 308 + + + Initialization sanity check failed. %s is shutting down. + 309 + + + Input not found or already spent + 310 + + + Insufficient dbcache for block verification + 311 + + + Insufficient funds + 312 + + + Invalid -i2psam address or hostname: '%s' + 313 + + + Invalid -onion address or hostname: '%s' + 314 + + + Invalid -proxy address or hostname: '%s' + 315 + + + Invalid P2P permission: '%s' + 316 + + + Invalid amount for %s=<amount>: '%s' (must be at least %s) + 317 + + + Invalid amount for %s=<amount>: '%s' + 318 + + + Invalid amount for -%s=<amount>: '%s' + 319 + + + Invalid netmask specified in -whitelist: '%s' + 320 + + + Invalid port specified in %s: '%s' + 321 + + + Invalid pre-selected input %s + 322 + + + Listening for incoming connections failed (listen returned error %s) + 323 + + + Loading P2P addresses… + 324 + + + Loading banlist… + 325 + + + Loading block index… + 326 + + + Loading wallet… + 327 + + + Missing amount + 328 + + + Missing solving data for estimating transaction size + 329 + + + Need to specify a port with -whitebind: '%s' + 330 + + + No addresses available + 331 + + + Not enough file descriptors available. + 332 + + + Not found pre-selected input %s + 333 + + + Not solvable pre-selected input %s + 334 + + + Prune cannot be configured with a negative value. + 335 + + + Prune mode is incompatible with -txindex. + 336 + + + Pruning blockstore… + 337 + + + Reducing -maxconnections from %d to %d, because of system limitations. + 338 + + + Replaying blocks… + 339 + + + Rescanning… + 340 + + + SQLiteDatabase: Failed to execute statement to verify database: %s + 341 + + + SQLiteDatabase: Failed to prepare statement to verify database: %s 342 - - Settings file could not be written + + SQLiteDatabase: Failed to read database verification error: %s 343 + + SQLiteDatabase: Unexpected application id. Expected %u, got %u + 344 + + + Section [%s] is not recognized. + 345 + + + Signing transaction failed + 348 + + + Specified -walletdir "%s" does not exist + 349 + + + Specified -walletdir "%s" is a relative path + 350 + + + Specified -walletdir "%s" is not a directory + 351 + + + Specified blocks directory "%s" does not exist. + 352 + + + Specified data directory "%s" does not exist. + 353 + + + Starting network threads… + 354 + + + The source code is available from %s. + 355 + + + The specified config file %s does not exist + 356 + + + The transaction amount is too small to pay the fee + 357 + + + The wallet will avoid paying less than the minimum relay fee. + 358 + + + This is experimental software. + 359 + + + This is the minimum transaction fee you pay on every transaction. + 360 + + + This is the transaction fee you will pay if you send a transaction. + 361 + + + Transaction %s does not belong to this wallet + 362 + + + Transaction amount too small + 363 + + + Transaction amounts must not be negative + 364 + + + Transaction change output index out of range + 365 + + + Transaction must have at least one recipient + 366 + + + Transaction needs a change address, but we can't generate it. + 367 + + + Transaction too large + 368 + + + Unable to allocate memory for -maxsigcachesize: '%s' MiB + 369 + + + Unable to bind to %s on this computer (bind returned error %s) + 370 + + + Unable to bind to %s on this computer. %s is probably already running. + 371 + + + Unable to create the PID file '%s': %s + 372 + + + Unable to find UTXO for external input + 373 + + + Unable to generate initial keys + 374 + + + Unable to generate keys + 375 + + + Unable to open %s for writing + 376 + + + Unable to parse -maxuploadtarget: '%s' + 377 + + + Unable to start HTTP server. See debug log for details. + 378 + + + Unable to unload the wallet before migrating + 379 + + + Unknown -blockfilterindex value %s. + 380 + + + Unknown address type '%s' + 381 + + + Unknown change type '%s' + 382 + + + Unknown network specified in -onlynet: '%s' + 383 + + + Unknown new rules activated (versionbit %i) + 384 + + + Unsupported global logging level %s=%s. Valid values: %s. + 385 + + + Wallet file creation failed: %s + 390 + + + acceptstalefeeestimates is not supported on %s chain. + 392 + + + Unsupported logging category %s=%s. + 386 + + + Error: Could not add watchonly tx %s to watchonly wallet + 276 + + + Error: Could not delete watchonly transactions. + 277 + + + User Agent comment (%s) contains unsafe characters. + 387 + + + Verifying blocks… + 388 + + + Verifying wallet(s)… + 389 + + + Wallet needed to be rewritten: restart %s to complete + 391 + + + Settings file could not be read + 346 + + + Settings file could not be written + 347 +