The previous code visualized the `CSubNet` object as string, then
parsed that string back to `CSubNet`. This is sub-optimal given that
the original `CSubNet` object can be used directly instead.
This avoids calling `LookupSubNet()` from the GUI.
Co-authored-by: furszy <matiasfurszyfer@protonmail.com>
Optimizes coin selection by performing the "group outputs"
procedure only once, outside the "attempt selection" process.
Avoiding the repeated execution of the 'GroupOutputs' operation
that occurs on each coin eligibility filters (up to 8 of them);
then for every coin vector type plus one for all the coins together.
This also let us not perform coin selection over coin eligibility
filtered groups that don't add new elements.
(because, if the previous round failed, and the subsequent one has
the same coins, then this new round will fail again).
The 'GroupOutputs()' function performs the same
calculations for only-positive and mixed groups,
the only difference is that when we look for
only-positive groups, we discard negative utxos.
So, instead of wasting resources calling GroupOutputs()
for positive-only first, then call it again to include
the negative ones in the result, we can execute
GroupOutputs() only once, including in the response
both group types (positive-only and mixed).
The following scenarios are covered:
1) 10 UTXO with the same script:
partial spends is enabled --> outputs must not be grouped.
2) 10 UTXO with the same script:
partial spends disabled --> outputs must be grouped.
3) 20 UTXO, 10 one from scriptA + 10 from scriptB:
a) if partial spends is enabled --> outputs must not be grouped.
b) if partial spends is not enabled --> 2 output groups expected (one per script).
3) Try to add a negative output (value - fee < 0):
a) if "positive_only" is enabled --> negative output must be skipped.
b) if "positive_only" is disabled --> negative output must be added.
4) Try to add a non-eligible UTXO (due not fulfilling the min depth target for
"not mine" UTXOs) --> it must not be added to any group
5) Try to add a non-eligible UTXO (due not fulfilling the min depth target for
"mine" UTXOs) --> it must not be added to any group
6) Surpass the 'OUTPUT_GROUP_MAX_ENTRIES' size and verify that a second partial
group gets created.
8847ce44e0 util: add missing include and fix function signature (Cory Fields)
Pull request description:
ping hebasto
Discovered while testing pre-compiled header support with CMake: https://github.com/theuni/bitcoin/commits/cmake-pch-poc. Compilation of that branch fails without this fix and succeeds with it.
Similar to the fix in #27144.
The problem of having a default argument in the definition was masked by the missing include. Using PCH forces that include, so we end up with the compiler error we should've been getting all along.
ACKs for top commit:
fanquake:
ACK 8847ce44e0
Tree-SHA512: 5eb9a6691ee37cbc5033a48aedcbf5c93af3b234614ae14c3fcc858f1ee505f630ad68f8bbb69ffa280080c8d0f91451362cb3819290b741ce906b2b3224a622
And not hide it inside the `OutputGroup::Insert` method.
This method does not return anything if insertion fails.
We can know before calling `Insert` whether the coin
will be accepted or not.
545ff924ab refactor: use string_view for RPC named argument values (stickies-v)
7727603e44 refactor: reduce unnecessary complexity in ParseNonRFCJSONValue (stickies-v)
1d02e59901 test: add cases to JSON parsing (stickies-v)
Pull request description:
Inspired by MarcoFalke's [comment](https://github.com/bitcoin/bitcoin/pull/26506#discussion_r1036149426). Main purpose of this PR is to minimize copying (potentially large) RPC named arguments when calling `.substr()` by using `std::string_view` instead of `std::string`. Furthermore, cleans up the code by removing unnecessary complexity in `ParseNonRFCJSONValue()` (done first to avoid refactoring required to concatenate `string` and `string_view`), updates some naming and adds a few test cases. Should not introduce any behaviour change.
## Questions
- ~Was there actually any merit to `ParseNonRFCJSONValue()` surrounding the value with brackets and then parsing it as an array? I don't see it, and the new approach doesn't fail any tests. Still a bit suspicious about it though.~
- Cleared up by https://github.com/bitcoin/bitcoin/pull/26506#pullrequestreview-1211984059
- If there are no objections to 7727603e44, I think we should follow up with a PR to rename `ParseNonRFCJSONValue()` to a local `Parse()` helper function (that throws if invalid), remove it from `client.h` and merge the test coverage we currently have on `ParseNonRFCJSONValue()` with the coverage we have on `UniValue::read()`.
ACKs for top commit:
ryanofsky:
Code review ACK 545ff924ab
MarcoFalke:
review ACK 545ff924ab📻
Tree-SHA512: b1c89fb010ac9c3054b023cac1acbba2a539a09cf39a7baffbd7f7571ee268d5a6d98701c7ac10d68a814526e8fd0fe96ac1d1fb072f272033e415b753f64a5c
Add common InitConfig function to deduplicate bitcoind and bitcoin-qt code
reading config files and creating the datadir.
There are a few minor changes in behavior:
- In bitcoin-qt, when there is a problem reading the configuration file, the
GUI error text has changed from "Error: Cannot parse configuration file:" to
"Error reading configuration file:" to be consistent with bitcoind.
- In bitcoind, when there is a problem reading the settings.json file, the
error text has changed from "Failed loading settings file" to "Settings
file could not be read" to be consistent with bitcoin-qt.
- In bitcoind, when there is a problem writing the settings.json file, the
error text has changed from "Failed saving settings file" to "Settings file
could not be written" to be consistent with bitcoin-qt.
- In bitcoin-qt, if there datadir is not accessible (e.g. no permission to read),
there is an normal error dialog showing "Error: filesystem error: status:
Permission denied [.../settings.json]", instead of an uncaught exception
56e37e71a2 Make miniscript fuzzers avoid script size limit (Pieter Wuille)
bcec5ab4ff Make miniscript fuzzers avoid ops limit (Pieter Wuille)
213fffa513 Enforce type consistency in miniscript_stable fuzz test (Pieter Wuille)
e1f30414c6 Simplify miniscript fuzzer NodeInfo struct (Pieter Wuille)
5abb0f5ac3 Do base type propagation in miniscript_stable fuzzer (Pieter Wuille)
Pull request description:
This adds a number of improvements to the miniscript fuzzers that all amount to rejecting invalid or overly big miniscripts early on:
* Base type propagation in the miniscript_stable fuzzers prevents constructing a large portion of miniscripts that would be illegal, with just a little bit of type logic in the fuzzer. The fuzzer input format is unchanged.
* Ops and script size tracking in GenNode means that too-large scripts (either due to script size limit or ops limit) will be detected on the fly during fuzz input processing, before actually constructing the scripts.
Closes #27147.
ACKs for top commit:
darosior:
re-ACK 56e37e71a2
dergoegge:
tACK 56e37e71a2
Tree-SHA512: 245584adf9a6644a35fe103bc81b619e5b4f5d467571a761b5809d08b1dec48f7ceaf4d8791ccd8208b45c6b309d2ccca23b3d1ec5399df76cd5bf88f2263280
This is only used in the current PR to avoid ugly
`strprintf(Untranslated("%s:\n%s"), str, MakeUnorderedList(details)`
boilerplate in init code. But in the future the function could be extended and
more widely used to include more details in GUI error messages or display them
in a more readable way, see code comment.
Previous bilingual_str tinyformat::format accepted bilingual format strings,
but not bilingual arguments. Extend it to accept both. This is useful when
embedding one translated string inside another translated string, for example:
`strprintf(_("Error: %s"), message)` which would fail previously if `message`
was a bilingual_str.
Some InitError calls had trailing \n characters, causing double newlines in
error output. After this change InitError calls consistently output one newline
instead of two. Appearance of messages in the GUI does not seem to be affected.
Can be tested with:
src/bitcoind -regtest -datadir=noexist
src/qt/bitcoin-qt -regtest -datadir=noexist
-BEGIN VERIFY SCRIPT-
git grep -l InitError src/ | xargs sed -i 's/\(InitError(.*\)\\n"/\1"/'
-END VERIFY SCRIPT-
75db62ba4c refactor: Move calculation logic out from `CheckSequenceLocksAtTip()` (Hennadii Stepanov)
3bc434f459 refactor: Add `CalculateLockPointsAtTip()` function (Hennadii Stepanov)
Pull request description:
This PR is follow up for bitcoin/bitcoin#22677 and bitcoin/bitcoin#23683.
On master (013daed9ac) it is not obvious that `CheckSequenceLocksAtTip()` function can modify its `LockPoints* lp` parameter which leads to https://github.com/bitcoin/bitcoin/pull/22677#discussion_r762040101.
This PR:
- separates the lockpoint calculate logic from `CheckSequenceLocksAtTip()` function into a new `CalculateLockPointsAtTip()` one
- cleans up the `CheckSequenceLocksAtTip()` function interface
- makes code easier to reason about (hopefully)
ACKs for top commit:
achow101:
ACK 75db62ba4c
stickies-v:
re-ACK 75db62b
Tree-SHA512: 072c3fd9cd1e1b0e0bfc8960a67b01c80a9f16d6778f374b6944ade03a020415ce8b8ab2593b0f5e787059c8cf90af798290b4c826785d41955092f6e12e7486
9a9d5da11f refactor: Stop using gArgs global in system.cpp (Ryan Ofsky)
b20b34f5b3 refactor: Use new GetConfigFilePath function (Ryan Ofsky)
Pull request description:
Most of the code in `util/system.cpp` that was hardcoded to use the global `ArgsManager` instance `gArgs` has been changed to stop using it (for example in https://github.com/bitcoin/bitcoin/pull/20092). But a few hardcoded references to `gArgs` remain. This commit removes the last ones so these functions aren't reading or writing global state.
Noticed these `gArgs` references while reviewing #27073
ACKs for top commit:
achow101:
ACK 9a9d5da11f
stickies-v:
ACK 9a9d5da11
willcl-ark:
tACK 9a9d5da11
Tree-SHA512: 2c74b0d5fc83e9ed2ec6562eb26ec735512f75db8876a11a5d5f04e6cdbe0cd8beec19894091aa2cbf29319194d2429ccbf8036f5520ecc394f6fe89a0079a7b
fb0dbe9423 docs: GetDataDirNet and GetDataDirBase don't create datadir (stickies-v)
Pull request description:
Since #27073, the behaviour of `GetDataDir()` [changed](https://github.com/bitcoin/bitcoin/pull/27073/files#diff-19427b0dd1a791adc728c82e88f267751ba4f1c751e19262cac03cccd2822216L435-L443) to only return the datadir path, but not create it if non-existent. This also changed the behaviour of `GetDataDirNet()` and `GetDataDirBase()` but the docs do not yet reflect that.
ACKs for top commit:
TheCharlatan:
ACK fb0dbe9423
theStack:
ACK fb0dbe9423
willcl-ark:
ACK fb0dbe942
Tree-SHA512: 3f10f4871df59882f3649c6d3b2362cae2f8a01ad0bd0c636c5608b0d177d279a2e8712930b819d6d3912e91fa6447b9e54507c33d8afe427f7f39002b013bfb
3141eab9c6 test: add functional test for ScanAndUnlinkAlreadyPrunedFiles (Andrew Toth)
e252909e56 test: add unit test for ScanAndUnlinkAlreadyPrunedFiles (Andrew Toth)
77557dda4a prune: scan and unlink already pruned block files on startup (Andrew Toth)
Pull request description:
There are a few cases where we can mark a block and undo file as pruned in our block index, but not actually remove the files from disk.
1. If we call `FindFilesToPrune` or `FindFilesToPruneManual` and crash before `UnlinkPrunedFiles`.
2. If on Windows there is an open file handle to the file somewhere else when calling `fs::remove` in `UnlinkPrunedFiles` (https://en.cppreference.com/w/cpp/filesystem/remove, https://learn.microsoft.com/en-us/windows/win32/api/fileapi/nf-fileapi-deletefilew#remarks). This could be from another process, or if we are calling `ReadBlockFromDisk`/`ReadRawBlockFromDisk` without having a lock on `cs_main` (which has been allowed since ccd8ef65f9).
This PR mitigates this by scanning all pruned block files on startup after `LoadBlockIndexDB` and unlinking them again.
ACKs for top commit:
achow101:
ACK 3141eab9c6
pablomartin4btc:
re-ACK with added functional test 3141eab9c6.
furszy:
Code review ACK 3141eab9
theStack:
Code-review ACK 3141eab9c6
Tree-SHA512: 6c73bc57838ad1b7e5d441af3c4d6bf4c61c4382e2b86485e57fbb74a61240710c0ceeceb8b4834e610ecfa3175c6955c81ea4b2285fee11ca6383f472979d8d
Use the same technique as is using in the FromString miniscript parser to
predict the final script size of the miniscript being generated in the
miniscript_stable and miniscript_smart fuzzers (by counting every unexplored
sub node as 1 script byte, which is possible because every leaf node always
adds at least 1 byte). This allows bailing out early if the script being
generated would exceed the maximum allowed size (before actually constructing
the miniscript, as that may happen only significantly later potentially).
Also add a self-check to make sure this predicted script size matches that
of generated scripts.
Keep track of the total number of ops the constructed script will have
during miniscript_stable and miniscript_smart fuzzers' GenNode, so it
can abort early if the 201 ops limit would be exceeded.
Also add a self-check that the final constructed node has the predicted
ops size limit, so we know the fuzzer's logic for keeping track of this
is correct.
Since we now keep track of all expected child node types (even if rudimentary)
in both miniscript_stable and miniscript_smart fuzzers, there is no need anymore
for the former shortcut NodeInfo constructors without sub types.
Keep track of which base type (B, K, V, or W) is desired in the miniscript_stable
ConsumeStableNode function. This allows aborting early if the constructed node
won't have the right type.
Note that this does not change the fuzzer format; the meaning of inputs in
ConsumeStableNode is unmodified. The only change is that often the fuzzer will
abort early.
The direct motivation is preventing recursing v: wrappers, which are the only
fragment type that does not otherwise increase the overall minimum possible script
size. In a later commit this will be exploited to prevent overly-large scripts from
being constructed.
Since #27073, the behaviour of GetDataDir changed to only return
the datadir path, but not create it. This also changed the behaviour
of GetDataDirNet and GetDataDirBase but the docs do not yet reflect
that.
c5825e14f8 doc: add explanation for fail_on_insufficient_dbcache (Ryan Ofsky)
7dff7da4f5 init: Return more fitting ChainStateLoadStatus if verification was interrupted (Martin Zumsande)
Pull request description:
This addresses two outstanding comments by ryanofsky from #25574:
* return `ChainstateLoadStatus::INTERRUPTED` instead of `ChainstateLoadStatus::SUCCESS` if verification was stopped by an interrupt. This would coincide with straightforward expectation, and it avoids a misleading [log entry](c5825e14f8/src/init.cpp (L1526)) in `init` for the block index load time (because that would include the verificiation, which didn't complete). It shouldn't affect node behavior otherwise because the shutdown signal would be caught in init anyway. In test, this would lead to an assert ([link](c5825e14f8/src/test/util/setup_common.cpp (L230))), which also makes more sense because benign interrupts are not expected there during init.
This can be tested by setting a large value for `-checkblocks`, interrupting the node during block verification and observing the log.
https://github.com/bitcoin/bitcoin/pull/25574#discussion_r1110050930
* add documentation for `require_full_verification` https://github.com/bitcoin/bitcoin/pull/25574#discussion_r1110031541
ACKs for top commit:
MarcoFalke:
thanks lgtm ACK c5825e14f8
Tree-SHA512: ca1c71a1b046d30083337dd9ef6d52e66fa1ac8c4ecd807716e4aa6a894179a81df41caee916fa30997fd6e0b284412a3c8f2919d19c29d826fb580ffb89fd73
Most of the code in util/system.cpp that was hardcoded to use the global
ArgsManager instance `gArgs` has been changed to work with explicit ArgsManager
instances (for example in https://github.com/bitcoin/bitcoin/pull/20092). But a
few hardcoded references to `gArgs` remain. This commit removes the last ones
so these functions aren't reading or writing global state.
807de2cebd wallet: skip R-value grinding for external signers (Sjors Provoost)
72b763e452 wallet: annotate bools in descriptor SPKM FillPSBT() (Sjors Provoost)
Pull request description:
When producing a dummy signature for the purpose of estimating the transaction fee, do not assume an external signer performs R-value grinding on the signature.
In particular, this avoids a scenario where the fee rate is 1 sat / vbyte and a transaction with a 72 byte signature is not accepted into our mempool.
Suggested testing:
1. On master, launch with `-signet` and create an external signer wallet using e.g. a Trezor and HWI, see [guide](https://github.com/bitcoin/bitcoin/blob/master/doc/external-signer.md#example-usage) (with the GUI it should "just work" once you have the HWI path configured).
2. Create a few addresses and fund them from the faucet: https://signet.bc-2.jp/ (wait for confirmation)
3. Create another address, and now send the entire wallet to it, set the fee to 1 sat/byte
4. Most likely this transaction never gets broadcast and you won't see it on the [signet explorer](https://explorer.bc-2.jp)
5. With this PR, try again.
6. Check the explorer and inspect the transaction. Each input witness starts with either `30440220` (R has 32 bytes) or `30440221` (R has 33 bytes). See this explainer for [DER encoding](https://bitcoin.stackexchange.com/questions/92680/what-are-the-der-signature-and-sec-format).
Fixes #26030
ACKs for top commit:
S3RK:
ACK 807de2cebd
achow101:
ACK 807de2cebd
furszy:
ACK 807de2ce
ishaanam:
utACK 807de2cebd
Tree-SHA512: 64f626a3030ef0ab1e43af86d8fba113151512561baf425e6e5182af53df3a64fa9e85c7f67bf4ed15b5ad6e5d5afc7fbba8b6e1f3bad388e48db51cb9446074
5da7c0b3e3 build: allow libitcoinkernel dll builds now that exports are fixed (Cory Fields)
130490aef9 build: always build bitcoin-chainstate against static libbitcoinkernel (Cory Fields)
545a74ef32 build: fix bitcoin-chainstate when libbitcoinkernel is static (Cory Fields)
9c253d2398 build: don't define DLL_EXPORT for windows (Cory Fields)
Pull request description:
Fixes #25008.
Fixes #19772.
1. Fixup the build defines so that exports are clean.
2. Work around a libtool issue wrt dependency calculation
3. Simplify everything by only ever building in-tree bitcoin-chainstate against a static libbitcoinkernel
4. Remove Windows-only hack that disabled dll creation
ACKs for top commit:
TheCharlatan:
ACK 5da7c0b3e3
Tree-SHA512: 61bab457e13842946387240da703d313509af30d4ca3371a19a26a5ef1716e4d7107b09567323041b549ab1fc97a064aa1d6992406936ab9c491a616bc7f4e7f
faab273e06 util: Return empty vector on invalid hex encoding (MarcoFalke)
fa3549a77b test: Add hex parse unit tests (MarcoFalke)
Pull request description:
Seems a bit confusing to happily accept random bytes and pretend they are hex encoded strings.
ACKs for top commit:
stickies-v:
re-ACK faab273e06
Tree-SHA512: a808135f744f50aece03d4bf5a71481c7bdca1fcdd0d5b113abdb0c8b382bf81cafee6d17c239041fb49b59f4e19970f24a475378e7f711c3a47d6438de2bdab
64c105442c util: make GetDataDir read-only & create datadir.. (willcl-ark)
56e370fbb9 util: add ArgsManager datadir helper functions (willcl-ark)
Pull request description:
Fixes #20070
Currently `ArgsManager::GetDataDir()` ensures it will always return a datadir by creating one if necessary. The function is shared between `bitcoind` `bitcoin-qt` and `bitcoin-cli` which results in the undesirable behaviour described in #20070.
This PR splits out the part of the function which creates directories and adds it as a standalone function, only called as part of `bitcoind` and `bitcoin-qt` init, but not `bitcoin-cli`.
`ReadConfigFiles`' behavior is changed to use the absolute path of the config file in error and warning messages instead of a relative path.
This was inadvertantly the form being tested [here](73966f75f6/test/functional/feature_config_args.py (L287)), whilst we were _not_ testing that a relative path was returned by the message even though we passed a relative path in as argument.
ACKs for top commit:
achow101:
ACK 64c105442c
hebasto:
re-ACK 64c105442c, only comments have been adjusted as requsted since my previous [review](https://github.com/bitcoin/bitcoin/pull/27073#pullrequestreview-1307435890).
TheCharlatan:
Re-ACK 64c105442c
ryanofsky:
Code review ACK 64c105442c. Only comment changes since last review
Tree-SHA512: b129501346071ad62551c9714492b21536d0558a94117d97218e255ef4e948d00df899a4bc2788faea27d3b1f20fc6136ef9d03e6a08498d926d9ad8688d6c96
f36d1d5b89 Use void* throughout support/lockedpool.h (Jeffrey Czyz)
Pull request description:
Replace uses of char* with void* in Arena's member variables. Instead,
cast to char* where needed in the implementation.
Certain compiler environments disallow std::hash<char*> specializations
to prevent hashing the pointer's value instead of the string contents.
Thus, compilation fails when std::unordered_map is keyed by char*.
Explicitly using void* is a workaround in such environments. For
consistency, void* is used throughout all member variables similarly to
the public interface.
Changes to this code are covered by src/test/allocator_tests.cpp.
ACKs for top commit:
achow101:
ACK f36d1d5b89
theStack:
Code-review ACK f36d1d5b89
jonatack:
ACK f36d1d5b89 review, debug build, unit tests, checked clang 15 raises "error: arithmetic on a pointer to void" without the conversions here from the generic void* pointer back to char*
Tree-SHA512: f9074e6d29ef78c795a512a6e00e9b591e2ff34165d09b73eae9eef25098c59e543c194346fcd4e83185a39c430d43744b6f7f9d1728a132843c67bd27ea5189
7013da07fb Add release note for PR#25943 (David Gumberg)
04f270b435 Add test for unspendable transactions and parameter 'maxburnamount' to sendrawtransaction. (David Gumberg)
Pull request description:
This PR adds a user configurable, zero by default parameter — `maxburnamount` — to `sendrawtransaction`. This PR makes bitcoin core reject transactions that contain unspendable outputs which exceed `maxburnamount`. closes #25899.
As a result of this PR, `sendrawtransaction` will by default block 3 kinds of transactions:
1. Those that begin with `OP_RETURN` - (datacarriers)
2. Those whose lengths exceed the script limit.
3. Those that contain invalid opcodes.
The user is able to configure a `maxburnamount` that will override this check and allow a user to send a potentially unspendable output into the mempool.
I see two legitimate use cases for this override:
1. Users that deliberately use `OP_RETURN` for datacarrier transactions that embed data into the blockchain.
2. Users that refuse to update, or are unable to update their bitcoin core client would be able to make use of new opcodes that their client doesn't know about.
ACKs for top commit:
glozow:
reACK 7013da07fb
achow101:
re-ACK 7013da07fb
Tree-SHA512: f786a796fb71a587d30313c96717fdf47e1106ab4ee0c16d713695e6c31ed6f6732dff6cbc91ca9841d66232166eb058f96028028e75c1507324426309ee4525
When producing a dummy signature for the purpose of estimating the transaction fee, do not assume an external signer performs R-value grinding on the signature.
In particular, this avoids a scenario where the fee rate is 1 sat / vbyte and a transaction with a 72 byte signature is not accepted into our mempool.
This commit also drops the nullptr default for CCoinControl arguments for functions that it touches. This is because having a boolean argument right next to an optional pointer is error prone.
Co-Authored-By: S3RK <1466284+S3RK@users.noreply.github.com>
.. only in bitcoind and bitcoin-qt
This changes behaviour of GetConfigFilePath which now always returns the
absolute path of the provided -conf argument.
