This makes it similar to -checkaddrman and -checkmempool, which
also allow to run the check occasionally instead of always / never.
Co-authored-by: Ryan Ofsky <ryan@ofsky.org>
The point of this was to be able to build bitcoin-tx and bitcoin-wallet without libevent, see #18504.
Now that we use our own implementation of urlDecode this is not needed anymore.
Co-authored-by: stickies-v <stickies-v@protonmail.com>
The `PopulateAndValidateSnapshot` function introduced in
f6e2da5fb7 from #19806 has been setting fake
`nTx` and `nChainTx` values that can show up in RPC results (see #29328) and
make `CBlockIndex` state hard to reason about, because it is difficult to know
whether the values are real or fake.
Revert to previous behavior of setting `nTx` and `nChainTx` to 0 when the
values are unknown, instead of faking them.
This commit fixes at least two assert failures in the (pindex->nChainTx ==
pindex->nTx + prev_chain_tx) check that would happen previously. Tests for
these failures are added separately in the next two commits.
Compatibility note: This change could result in -checkblockindex failures if a
snapshot was loaded by a previous version of Bitcoin Core and not fully
validated, because fake nTx values will have been saved to the block index. It
would be pretty easy to avoid these failures by adding some compatibility code
to `LoadBlockIndex` and changing `nTx` values from 1 to 0 when they are fake
(when `(pindex->nStatus & BLOCK_VALID_MASK) < BLOCK_VALID_TRANSACTIONS`), but a
little simpler not to worry about being compatible in this case.
d27e2d87b9 test: test_bitcoin: allow -testdatadir=<datadir> (Larry Ruane)
Pull request description:
This backward-compatible change would help with code review, testing, and debugging. When `test_bitcoin` runs, it creates a working or data directory within `/tmp/test_common_Bitcoin\ Core/`, named as a long random (hex) string.
This small patch does three things:
- If the (new) argument `-testdatadir=<datadir>` is given, use `<datadir>/test_temp/<test-name>/datadir` as the working directory
- When the test starts, remove `<datadir>/test_temp/<test-name>/datadir` if it exists from an earlier run (currently, it's presumed not to exist due to the long random string)
- Don't delete the working directory at the end of the test if a custom data directory is being used
Example usage, which will remove, create, use `/somewhere/test_temp/getarg_tests/boolarg`, and leave it afterward:
```
$ test_bitcoin --run_test=getarg_tests/boolarg -- -testdatadir=/somewhere
Running 1 test case...
Test directory (will not be deleted): "/somewhere/test_temp/getarg_tests/boolarg/datadir"
*** No errors detected
$ ls -l /somewhere/test_temp/getarg_tests/boolarg/datadir
total 8
drwxrwxr-x 2 larry larry 4096 Feb 22 10:28 blocks
-rw-rw-r-- 1 larry larry 1273 Feb 22 10:28 debug.log
```
(A relative pathname also works.)
This change affects only `test_bitcoin`; it could also be applied to `test_bitcoin-qt` but that's slightly more involved so I'm skipping that for now.
The rationale for this change is that, when running the test using the debugger, it's often useful to watch `debug.log` as the test runs and inspect some of the other files (I've looked at the generated `blknnnn.dat` files for example). Currently, that requires figuring out where the test's working directory is since it changes on every test run. Tests can be run with `-printtoconsole=1` to show debug logging to the terminal, but it's nice to keep `debug.log` continuously open in an editor, for example.
Even if not using a debugger, it's sometimes helpful to see `debug.log` and other artifacts after the test completes.
Similar functionality is already possible with the functional tests using the `--tmpdir=` and `--nocleanup` arguments.
ACKs for top commit:
davidgumberg:
ACK d27e2d87b9
tdb3:
re-ACK for d27e2d87b9
achow101:
ACK d27e2d87b9
cbergqvist:
ACK d27e2d87b95b7982c05b4c88e463cc9626ab9f0a! (Already did some testing with `fs::remove()` to make sure it was compatible with the `util::Lock/UnlockDirectory` implementation).
marcofleon:
ACK d27e2d87b9. I ran all the tests with my previous open file limit and no errors were detected. Also ran some individual tests with no, relative, and absolute paths and everything looks good.
furszy:
ACK d27e2d8
Tree-SHA512: a8f535f34a48b6699cb440f97f5562ec643f3bfba4ea685768980b871fc8b6e1135f70fc05dbe19aa2c8bacb1ddeaff212d63473605a7422ff76332b3a6b1f68
d5228efb53 kernel: Remove dependency on CScheduler (TheCharlatan)
06069b3913 scripted-diff: Rename MainSignals to ValidationSignals (TheCharlatan)
0d6d2b650d scripted-diff: Rename SingleThreadedSchedulerClient to SerialTaskRunner (TheCharlatan)
4abde2c4e3 [refactor] Make MainSignals RAII styled (TheCharlatan)
84f5c135b8 refactor: De-globalize g_signals (TheCharlatan)
473dd4b97a [refactor] Prepare for g_signals de-globalization (TheCharlatan)
3fba3d5dee [refactor] Make signals optional in mempool and chainman (TheCharlatan)
Pull request description:
By defining a virtual interface class for the scheduler client, users of the kernel can now define their own event consuming infrastructure, without having to spawn threads or rely on the scheduler design.
Removing `CScheduler` also allows removing the thread and exception modules from the kernel library.
To make the `CMainSignals` class easier to use from a kernel library perspective, remove its global instantiation and adopt RAII practices.
Renames `CMainSignals` to `ValidationSignals`, which more accurately describes its purpose and scope.
Also make the `ValidationSignals` in the `ChainstateManager` and CTxMemPool` optional. This could be useful in the future for using or testing these classes without having to instantiate any form of signal handling.
---
This PR is part of the [libbitcoinkernel project](https://github.com/bitcoin/bitcoin/issues/27587). It improves the kernel API and removes two modules from the kernel library.
ACKs for top commit:
maflcko:
re-ACK d5228efb53🌄
ryanofsky:
Code review ACK d5228efb53. Just comment change since last review.
vasild:
ACK d5228efb53
furszy:
diff ACK d5228ef
Tree-SHA512: e93a5f10eb6182effb84bb981859a7ce750e466efd8171045d8d9e7fe46e4065631d9f6f533c5967c4d34c9bb7d7a67e9f4593bd4c5b30cd7b3bbad7be7b331b
Specifying this argument overrides the path location for test_bitcoin;
it becomes <datadir>/test_common_Bitcoin Core/<testname>/datadir. Also,
this directory isn't removed after the test completes. This can make it
easier for developers to study the results of a test (see the state of
the data directory after the test runs), and also (for example) have an
editor open on debug.log to monitor it across multiple test runs instead
of having to re-open a different pathname each time.
Example usage (note the "--" is needed):
test_bitcoin --run_test=getarg_tests/boolarg -- \
-testdatadir=/somewhere/mydatadir
This will create (if necessary) and use the data directory:
/somewhere/mydatadir/test_common_Bitcoin Core/getarg_tests/boolarg/datadir
Co-authored-by: furszy <mfurszy@protonmail.com>
9d1dbbd4ce scripted-diff: Fix bitcoin_config_h includes (TheCharlatan)
Pull request description:
As mentioned in https://github.com/bitcoin/bitcoin/pull/26924#issuecomment-1403449932 and https://github.com/bitcoin/bitcoin/pull/29263#issuecomment-1922334399, it is currently not safe to remove `bitcoin-config.h` includes from headers because some unrelated file might be depending on it.
See also #26972 for discussion.
Solve this by including the file directly everywhere it's required, regardless of whether or not it's already included by another header.
There should be no functional change here, but it will allow us to safely remove includes from headers in the future.
~I'm afraid it's a bit tedious to reproduce these commits, but it's reasonably straightforward:~
Edit: See note below
```bash
# All commands executed from the src/ subdir.
# Collect all tokens from bitcoin-config.h.in
# Isolate the tokens and remove blank lines
# Replace newlines with | and remove the last trailing one
# Collect all files which use these tokens
# Filter out subprojects (proper forwarding can be verified from Makefiles)
# Filter out .rc files
# Save to a text file
git grep -E -l `grep undef config/bitcoin-config.h.in | cut -d" " -f2 | grep -v '^$' | tr '\n' '|' | sed 's/|$//'` | grep -v -e "^leveldb/" -e "^secp256k1/" -e "^crc32c/" -e "^minisketch/" -e "^Makefile" -e "\.rc$" > files-with-config-include.txt
# Find all files from the above list which don't include bitcoin-config.h
git grep -L -E "config/bitcoin-config.h" -- `cat files-with-config-include.txt`
# Include them manually with the exception of some files in crypto:
# crypto/sha256_arm_shani.cpp crypto/sha256_avx2.cpp crypto/sha256_sse41.cpp crypto/sha256_x86_shani.cpp
# These are exceptions which don't use bitcoin-config.h, rather the Makefile.am adds these cppflags manually.
# Commit changes. This should match the first commit of this PR.
# Use the same search as above to find all files which DON'T use any config tokens
git grep -E -L `grep undef config/bitcoin-config.h.in | cut -d" " -f2 | grep -v '^$' | tr '\n' '|' | sed 's/|$//'` | grep -v -e "^leveldb/" -e "^secp256k1/" -e "^crc32c/" -e "^minisketch/" -e "^Makefile" -e "\.rc$" > files-without-config-include.txt
# Manually remove the includes and commit changes. This should match the second commit of this PR.
```
Edit: I'll keep this old description for posterity, but the manual approach has been replaced with a scripted diff from TheCharlatan
ACKs for top commit:
maflcko:
ACK 9d1dbbd4ce🚪
TheCharlatan:
ACK 9d1dbbd4ce
hebasto:
ACK 9d1dbbd4ce, I have reviewed the code and it looks OK.
fanquake:
ACK 9d1dbbd4ce
Tree-SHA512: f11ddc4ae6a887f96b954a6b77f310558ddb271088a3fda3edc833669c4251b7f392515224bbb8e5f67eb2c799b4ffed3b07d96454e82ec635c686d0df545872
By defining a virtual interface class for the scheduler client, users of
the kernel can now define their own event consuming infrastructure,
without having to spawn threads or rely on the scheduler design.
Removing CScheduler also allows removing the thread and
exception modules from the kernel library.
This is done in preparation for the next two commits, where the
CMainSignals are de-globalized.
This avoids adding new constructor arguments to the ChainstateManager
and CTxMemPool classes over the next two commits.
This could also allow future tests that are only interested in the
internal behaviour of the classes to forgo instantiating the signals.
-BEGIN VERIFY SCRIPT-
regex_string='^(?!//).*(AC_APPLE_UNIVERSAL_BUILD|BOOST_PROCESS_USE_STD_FS|CHAR_EQUALS_INT8|CLIENT_VERSION_BUILD|CLIENT_VERSION_IS_RELEASE|CLIENT_VERSION_MAJOR|CLIENT_VERSION_MINOR|COPYRIGHT_HOLDERS|COPYRIGHT_HOLDERS_FINAL|COPYRIGHT_HOLDERS_SUBSTITUTION|COPYRIGHT_YEAR|ENABLE_ARM_SHANI|ENABLE_AVX2|ENABLE_EXTERNAL_SIGNER|ENABLE_SSE41|ENABLE_TRACING|ENABLE_WALLET|ENABLE_X86_SHANI|ENABLE_ZMQ|HAVE_BOOST|HAVE_BUILTIN_CLZL|HAVE_BUILTIN_CLZLL|HAVE_BYTESWAP_H|HAVE_CLMUL|HAVE_CONSENSUS_LIB|HAVE_CXX20|HAVE_DECL_BE16TOH|HAVE_DECL_BE32TOH|HAVE_DECL_BE64TOH|HAVE_DECL_BSWAP_16|HAVE_DECL_BSWAP_32|HAVE_DECL_BSWAP_64|HAVE_DECL_FORK|HAVE_DECL_FREEIFADDRS|HAVE_DECL_GETIFADDRS|HAVE_DECL_HTOBE16|HAVE_DECL_HTOBE32|HAVE_DECL_HTOBE64|HAVE_DECL_HTOLE16|HAVE_DECL_HTOLE32|HAVE_DECL_HTOLE64|HAVE_DECL_LE16TOH|HAVE_DECL_LE32TOH|HAVE_DECL_LE64TOH|HAVE_DECL_PIPE2|HAVE_DECL_SETSID|HAVE_DECL_STRERROR_R|HAVE_DEFAULT_VISIBILITY_ATTRIBUTE|HAVE_DLFCN_H|HAVE_DLLEXPORT_ATTRIBUTE|HAVE_ENDIAN_H|HAVE_EVHTTP_CONNECTION_GET_PEER_CONST_CHAR|HAVE_FDATASYNC|HAVE_GETENTROPY_RAND|HAVE_GETRANDOM|HAVE_GMTIME_R|HAVE_INTTYPES_H|HAVE_LIBADVAPI32|HAVE_LIBCOMCTL32|HAVE_LIBCOMDLG32|HAVE_LIBGDI32|HAVE_LIBIPHLPAPI|HAVE_LIBKERNEL32|HAVE_LIBOLE32|HAVE_LIBOLEAUT32|HAVE_LIBSHELL32|HAVE_LIBSHLWAPI|HAVE_LIBUSER32|HAVE_LIBUUID|HAVE_LIBWINMM|HAVE_LIBWS2_32|HAVE_MALLOC_INFO|HAVE_MALLOPT_ARENA_MAX|HAVE_MINIUPNPC_MINIUPNPC_H|HAVE_MINIUPNPC_UPNPCOMMANDS_H|HAVE_MINIUPNPC_UPNPERRORS_H|HAVE_NATPMP_H|HAVE_O_CLOEXEC|HAVE_POSIX_FALLOCATE|HAVE_PTHREAD|HAVE_PTHREAD_PRIO_INHERIT|HAVE_STDINT_H|HAVE_STDIO_H|HAVE_STDLIB_H|HAVE_STRERROR_R|HAVE_STRINGS_H|HAVE_STRING_H|HAVE_STRONG_GETAUXVAL|HAVE_SYSCTL|HAVE_SYSCTL_ARND|HAVE_SYSTEM|HAVE_SYS_ENDIAN_H|HAVE_SYS_PRCTL_H|HAVE_SYS_RESOURCES_H|HAVE_SYS_SELECT_H|HAVE_SYS_STAT_H|HAVE_SYS_SYSCTL_H|HAVE_SYS_TYPES_H|HAVE_SYS_VMMETER_H|HAVE_THREAD_LOCAL|HAVE_TIMINGSAFE_BCMP|HAVE_UNISTD_H|HAVE_VM_VM_PARAM_H|LT_OBJDIR|PACKAGE_BUGREPORT|PACKAGE_NAME|PACKAGE_STRING|PACKAGE_TARNAME|PACKAGE_URL|PACKAGE_VERSION|PTHREAD_CREATE_JOINABLE|QT_QPA_PLATFORM_ANDROID|QT_QPA_PLATFORM_COCOA|QT_QPA_PLATFORM_MINIMAL|QT_QPA_PLATFORM_WINDOWS|QT_QPA_PLATFORM_XCB|QT_STATICPLUGIN|STDC_HEADERS|STRERROR_R_CHAR_P|USE_ASM|USE_BDB|USE_DBUS|USE_NATPMP|USE_QRCODE|USE_SQLITE|USE_UPNP|_FILE_OFFSET_BITS|_LARGE_FILES)'
exclusion_files=":(exclude)src/minisketch :(exclude)src/crc32c :(exclude)src/secp256k1 :(exclude)src/crypto/sha256_arm_shani.cpp :(exclude)src/crypto/sha256_avx2.cpp :(exclude)src/crypto/sha256_sse41.cpp :(exclude)src/crypto/sha256_x86_shani.cpp"
git grep --perl-regexp --files-with-matches "$regex_string" -- '*.cpp' $exclusion_files | xargs git grep -L "bitcoin-config.h" | while read -r file; do line_number=$(awk -v my_file="$file" '/\/\/ file COPYING or https?:\/\/www.opensource.org\/licenses\/mit-license.php\./ {line = NR} /^\/\// && NR == line + 1 {while(getline && /^\/\//) line = NR} END {print line+1}' "$file"); sed -i "${line_number}i\\\\n\#if defined(HAVE_CONFIG_H)\\n#include <config/bitcoin-config.h>\\n\#endif" "$file"; done;
git grep --perl-regexp --files-with-matches "$regex_string" -- '*.h' $exclusion_files | xargs git grep -L "bitcoin-config.h" | while read -r file; do sed -i "/#define.*_H/a \\\\n\#if defined(HAVE_CONFIG_H)\\n#include <config/bitcoin-config.h>\\n\#endif" "$file"; done;
for file in $(git grep --files-with-matches 'bitcoin-config.h' -- '*.cpp' '*.h' $exclusion_files); do if ! grep -q --perl-regexp "$regex_string" $file; then sed -i '/HAVE_CONFIG_H/{N;N;N;d;}' $file; fi; done;
-END VERIFY SCRIPT-
The first command creates a regular expression for matching all bitcoin-config.h symbols in the following form: ^(?!//).*(AC_APPLE_UNIVERSAL_BUILD|BOOST_PROCESS_USE_STD_FS|...|_LARGE_FILES). It was generated with:
./autogen.sh && printf '^(?!//).*(%s)' $(awk '/^#undef/ {print $2}' src/config/bitcoin-config.h.in | paste -sd "|" -)
The second command holds a list of files and directories that should not be processed. These include subtree directories as well as some crypto files that already get their symbols through the makefile.
The third command checks for missing bitcoin-config headers in .cpp files and adds the header if it is missing.
The fourth command checks for missing bitcoin-config headers in .h files and adds the header if it is missing.
The fifth command checks for unneeded bitcoin-config headers in sources files and removes the header if it is unneeded.
29029df5c7 [doc] v3 signaling in mempool-replacements.md (glozow)
e643ea795e [fuzz] v3 transactions and sigop-adjusted vsize (glozow)
1fd16b5c62 [functional test] v3 transaction submission (glozow)
27c8786ba9 test framework: Add and use option for tx-version in MiniWallet methods (MarcoFalke)
9a1fea55b2 [policy/validation] allow v3 transactions with certain restrictions (glozow)
eb8d5a2e7d [policy] add v3 policy rules (glozow)
9a29d470fb [rpc] return full string for package_msg and package-error (glozow)
158623b8e0 [refactor] change Workspace::m_conflicts and adjacent funcs/structs to use Txid (glozow)
Pull request description:
See #27463 for overall package relay tracking.
Delving Bitcoin discussion thread: https://delvingbitcoin.org/t/v3-transaction-policy-for-anti-pinning/340
Delving Bitcoin discussion for LN usage: https://delvingbitcoin.org/t/lightning-transactions-with-v3-and-ephemeral-anchors/418
Rationale:
- There are various pinning problems with RBF and our general ancestor/descendant limits. These policies help mitigate many pinning attacks and make package RBF feasible (see #28984 which implements package RBF on top of this). I would focus the most here on Rule 3 pinning. [1][2]
- Switching to a cluster-based mempool (see #27677 and #28676) requires the removal of CPFP carve out, which applications depend on. V3 + package RBF + ephemeral anchors + 1-parent-1-child package relay provides an intermediate solution.
V3 policy is for "Priority Transactions." [3][4] It allows users to opt in to more restrictive topological limits for shared transactions, in exchange for the more robust fee-bumping abilities that offers. Even though we don't have cluster limits, we are able to treat these transactions as having as having a maximum cluster size of 2.
Immediate benefits:
- You can presign a transaction with 0 fees (not just 1sat/vB!) and add a fee-bump later.
- Rule 3 pinning is reduced by a significant amount, since the attacker can only attach a maximum of 1000vB to your shared transaction.
This also enables some other cool things (again see #27463 for overall roadmap):
- Ephemeral Anchors
- Package RBF for these 1-parent-1-child packages. That means e.g. a commitment tx + child can replace another commitment tx using the child's fees.
- We can transition to a "single anchor" universe without worrying about package limit pinning. So current users of CPFP carve out would have something else to use.
- We can switch to a cluster-based mempool [5] (#27677#28676), which removes CPFP carve out [6].
[1]: Original mailing list post and discussion about RBF pinning problems https://gist.github.com/glozow/25d9662c52453bd08b4b4b1d3783b9ff, https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2022-January/019817.html
[2]: A FAQ is "we need this for cluster mempool, but is this still necessary afterwards?" There are some pinning issues that are fixed here and not fully fixed in cluster mempool, so we will still want this or something similar afterward.
[3]: Mailing list post for v3 https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2022-September/020937.html
[4]: Original PR #25038 also contains a lot of the discussion
[5]: https://delvingbitcoin.org/t/an-overview-of-the-cluster-mempool-proposal/393/7
[6]: https://delvingbitcoin.org/t/an-overview-of-the-cluster-mempool-proposal/393#the-cpfp-carveout-rule-can-no-longer-be-supported-12
ACKs for top commit:
sdaftuar:
ACK 29029df5c7
achow101:
ACK 29029df5c7
instagibbs:
ACK 29029df5c7 modulo that
Tree-SHA512: 9664b078890cfdca2a146439f8835c9d9ab483f43b30af8c7cd6962f09aa557fb1ce7689d5e130a2ec142235dbc8f21213881baa75241c5881660f9008d68450
Ensure we are checking sigop-adjusted virtual size by creating setups
and packages where sigop cost is larger than bip141 vsize.
Co-authored-by: Gregory Sanders <gsanders87@gmail.com>
6db04be102 Get rid of shutdown.cpp/shutdown.h, use SignalInterrupt directly (Ryan Ofsky)
213542b625 refactor: Add InitContext function to initialize NodeContext with global pointers (Ryan Ofsky)
feeb7b816a refactor: Remove calls to StartShutdown from KernelNotifications (Ryan Ofsky)
6824eecaf1 refactor: Remove call to StartShutdown from stop RPC (Ryan Ofsky)
1d92d89edb util: Get rid of uncaught exceptions thrown by SignalInterrupt class (Ryan Ofsky)
ba93966368 refactor: Remove call to ShutdownRequested from IndexWaitSynced (Ryan Ofsky)
42e5829d97 refactor: Remove call to ShutdownRequested from HTTPRequest (Ryan Ofsky)
73133c36aa refactor: Add NodeContext::shutdown member (Ryan Ofsky)
f4a8bd6e2f refactor: Remove call to StartShutdown from qt (Ryan Ofsky)
f0c73c1336 refactor: Remove call to ShutdownRequested from rpc/mining (Ryan Ofsky)
263b23f008 refactor: Remove call to ShutdownRequested from chainstate init (Ryan Ofsky)
Pull request description:
This change drops `shutdown.h` and `shutdown.cpp` files, replacing them with a `NodeContext::shutdown` member which is used to trigger shutdowns directly. This gets rid of an unnecessary layer of indirection, and allows getting rid of the `kernel::g_context` global.
Additionally, this PR tries to improve error handling of `SignalInterrupt` code by marking relevant methods `[[nodiscard]]` to avoid the possibility of uncaught exceptions mentioned https://github.com/bitcoin/bitcoin/pull/27861#discussion_r1255496707.
Behavior is changing In a few cases which are noted in individual commit messages. Particularly: GUI code more consistently interrupts RPCs when it is shutting down, shutdown state no longer persists between unit tests, the stop RPC now returns an RPC error if requesting shutdown fails instead of aborting, and other failed shutdown calls now log errors instead of aborting.
This PR is a net reduction in lines of code, but in some cases the explicit error handling and lack of global shutdown functions do make it more verbose. The verbosity can be seen as good thing if it discourages more code from directly triggering shutdowns, and instead encourages code to return errors or send notifications that could be translated into shutdowns. Probably a number of existing shutdown calls could just be replaced by better error handling.
ACKs for top commit:
achow101:
ACK 6db04be102
TheCharlatan:
Re-ACK 6db04be102
maflcko:
ACK 6db04be102👗
stickies-v:
re-ACK 6db04be102
Tree-SHA512: 7a34cb69085f37e813c43bdaded1a0cbf6c53bd95fdde96f0cb45346127fc934604c43bccd3328231ca2f1faf712a7418d047ceabd22ef2dca3c32ebb659e634
This change is mostly a refectoring that removes some code and gets rid of an
unnecessary layer of indirection after #27861
But it is not a pure refactoring since StartShutdown, AbortShutdown, and
WaitForShutdown functions used to abort on failure, and the replacement code
logs or returns errors instead.
Use SignalInterrupt object instead. There is a slight change in behavior here
because the previous StartShutdown code used to abort on failure and the
new code logs errors instead.
Add NodeContext::shutdown variable and start using it to replace the
kernel::Context::interrupt variable. The latter can't easily be removed right
away but will be removed later in this PR.
Moving the interrupt object from the kernel context to the node context
increases flexibility of the kernel API so it is possible to use multiple
interrupt objects, or avoid creating one if one is not needed. It will also
allow getting rid of the kernel::g_context global later in this PR, replacing
it with a private SignalInterrupt instance in init.cpp
There is no change in behavior in this commit outside of unit tests. In unit
tests there should be no visible change either, but internally now each test
has its own interrupt variable so the variable will be automatically reset
between tests.
91504cbe0d rpc: `SyncWithValidationInterfaceQueue` on fee estimation RPC's (ismaelsadeeq)
714523918b tx fees, policy: CBlockPolicyEstimator update from `CValidationInterface` notifications (ismaelsadeeq)
dff5ad3b99 CValidationInterface: modify the parameter of `TransactionAddedToMempool` (ismaelsadeeq)
91532bd382 tx fees, policy: update `CBlockPolicyEstimator::processBlock` parameter (ismaelsadeeq)
bfcd401368 CValidationInterface, mempool: add new callback to `CValidationInterface` (ismaelsadeeq)
0889e07987 tx fees, policy: cast with static_cast instead of C-Style cast (ismaelsadeeq)
a0e3eb7549 tx fees, policy: bugfix: move `removeTx` into reason != `BLOCK` condition (ismaelsadeeq)
Pull request description:
This is an attempt to #11775
This Pr will enable fee estimator to listen to ValidationInterface notifications to process new transactions added and removed from the mempool.
This PR includes the following changes:
- Added a new callback to the Validation Interface `MempoolTransactionsRemovedForConnectedBlock`, which notifies listeners about the transactions that have been removed due to a new block being connected, along with the height at which the transactions were removed.
- Modified the `TransactionAddedToMempool` callback parameter to include additional information about the transaction needed for fee estimation.
- Updated `CBlockPolicyEstimator` to process transactions using` CTransactionRef` instead of `CTxMempoolEntry.`
- Implemented the `CValidationInterface` interface in `CBlockPolicyEstimater` and overridden the `TransactionAddedToMempool`, `TransactionRemovedFromMempool`, and `MempoolTransactionsRemovedForConnectedBlock` methods to receive updates from their notifications.
Prior to this PR, the fee estimator updates from the mempool, i.e whenever a new block is connected all transactions in the block that are in our mempool are going to be removed using the `removeForBlock` function in `txmempool.cpp`.
This removal triggered updates to the fee estimator. As a result, the fee estimator would block mempool's `cs` until it finished updating every time a new block was connected.
Instead of being blocked only on mempool tx removal, we were blocking on both tx removal and fee estimator updating.
If we want to further improve fee estimation, or add heavy-calulation steps to it, it is currently not viable as we would be slowing down block relay in the process
This PR is smaller in terms of the changes made compared to #11775, as it focuses solely on enabling fee estimator updates from the validationInterface/cscheduler thread notifications.
I have not split the validation interface because, as I understand it, the rationale behind the split in #11775 was to have `MempoolInterface` signals come from the mempool and `CValidationInterface` events come from validation. I believe this separation can be achieved in a separate refactoring PR when the need arises.
Also left out some commits from #11775
- Some refactoring which are no longer needed.
- Handle reorgs much better in fee estimator.
- Track witness hash malleation in fee estimator
I believe they are a separate change that can come in a follow-up after this.
ACKs for top commit:
achow101:
ACK 91504cbe0d
TheCharlatan:
Re-ACK 91504cbe0d
willcl-ark:
ACK 91504cbe0d
Tree-SHA512: 846dfb9da57a8a42458827b8975722d153907fe6302ad65748d74f311e1925557ad951c3d95fe71fb90ddcc8a3710c45abb343ab86b88780871cb9c38c72c7b1
Also, add missing includes to scriptpubkeyman.
Also, export dependecies of the BasicTestingSetup from setup_common.h,
to avoid having to include them when setup_common.h is already included.
fa79a881ce refactor: P2P transport without serialize version and type (MarcoFalke)
fa9b5f4fe3 refactor: NetMsg::Make() without nVersion (MarcoFalke)
66669da4a5 Remove unused Make() overload in netmessagemaker.h (MarcoFalke)
fa0ed07941 refactor: VectorWriter without nVersion (MarcoFalke)
Pull request description:
Now that the serialize framework ignores the serialize version and serialize type, everything related to it can be removed from the code.
This is the first step, removing dead code from the P2P stack. A different pull will remove it from the wallet and other parts.
ACKs for top commit:
ajtowns:
reACK fa79a881ce
Tree-SHA512: 785b413580d980f51f0d4f70ea5e0a99ce14cd12cb065393de2f5254891be94a14f4266110c8b87bd2dbc37467676655bce13bdb295ab139749fcd8b61bd5110
`CBlockPolicyEstimator` will implement `CValidationInterface` and
subscribe to its notification to process transactions added and removed
from the mempool.
Re-delegate calculation of `validForFeeEstimation` from validation to fee estimator.
Also clean up the validForFeeEstimation arg thats no longer needed in `CTxMempool`.
Co-authored-by: Matt Corallo <git@bluematt.me>
The nVersion field is unused, so remove it.
This is also required for future commits.
Also, add PushMessage aliases in PeerManagerImpl to make calling code
less verbose.
Co-Authored-By: Anthony Towns <aj@erisian.com.au>
83986f464c Include version.h in fewer places (Anthony Towns)
c7b61fd61b Convert some CDataStream to DataStream (Anthony Towns)
1410d300df serialize: Drop useless version param from GetSerializeSize() (Anthony Towns)
bf574a7501 serialize: drop GetSerializeSizeMany (Anthony Towns)
efa9eb6d7c serialize: Drop nVersion from [C]SizeComputer (Anthony Towns)
Pull request description:
Drops the version field from `GetSerializeSize()`, simplifying the code in various places. Also drop `GetSerializeSizeMany()` (as just removing the version parameter could result in silent bugs) and remove unnecessary instances of `#include <version.h>`.
ACKs for top commit:
maflcko:
ACK 83986f464c📒
theuni:
ACK 83986f464c.
Tree-SHA512: 36617b6dfbb1b4b0afbf673e905525fc6d623d3f568d3f86e3b9d4f69820db97d099e83a88007bfff881f731ddca6755ebf1549e8d8a7762437dfadbf434c62e
6a917918b7 fuzz: allow fake and duplicate inputs in tx_package_eval target (Greg Sanders)
a0626ccdad fuzz: allow reaching MempoolAcceptResult::ResultType::DIFFERENT_WITNESS in tx_package_eval target (Greg Sanders)
Pull request description:
Exercises `DIFFERENT_WITNESS` by using "blank" WSH() and allowing witness to determine wtxid, and attempts to make invalid/duplicate inputs.
ACKs for top commit:
dergoegge:
Coverage looks good to me ACK 6a917918b7
Tree-SHA512: db894f5f5b81c6b454874baf11f296462832285f41ccb09f23c0db92b9abc98f8ecacd72fc8f60dc92cb7947f543a2e55bed2fd210b0e8ca7c7d5389d90b14af
0420f99f42 Create net_peer_connection unit tests (Jon Atack)
4b834f6499 Allow unit tests to access additional CConnman members (Jon Atack)
34b9ef443b net/rpc: Makes CConnman::GetAddedNodeInfo able to return only non-connected address on request (Sergi Delgado Segura)
94e8882d82 rpc: Prevents adding the same ip more than once when formatted differently (Sergi Delgado Segura)
2574b7e177 net/rpc: Check all resolved addresses in ConnectNode rather than just one (Sergi Delgado Segura)
Pull request description:
## Rationale
Currently, `addnode` has a couple of corner cases that allow it to either connect to the same peer more than once, hence wasting outbound connection slots, or add redundant information to `m_added_nodes`, hence making Bitcoin iterate through useless data on a regular basis.
### Connecting to the same node more than once
In general, connecting to the same node more than once is something we should try to prevent. Currently, this is possible via `addnode` in two different ways:
1. Calling `addnode` more than once in a short time period, using two equivalent but distinct addresses
2. Calling `addnode add` using an IP, and `addnode onetry` after with an address that resolved to the same IP
For the former, the issue boils down to `CConnman::ThreadOpenAddedConnections` calling `CConnman::GetAddedNodeInfo` once, and iterating over the result to open connections (`CConman::OpenNetworkConnection`) on the same loop for all addresses.`CConnman::ConnectNode` only checks a single address, at random, when resolving from a hostname, and uses it to check whether we are already connected to it.
An example to test this would be calling:
```
bitcoin-cli addnode "127.0.0.1:port" add
bitcoin-cli addnode "localhost:port" add
```
And check how it allows us to perform both connections some times, and some times it fails.
The latter boils down to the same issue, but takes advantage of `onetry` bypassing the `CConnman::ThreadOpenAddedConnections` logic and calling `CConnman::OpenNetworkConnection` straightaway. A way to test this would be:
```
bitcoin-cli addnode "127.0.0.1:port" add
bitcoin-cli addnode "localhost:port" onetry
```
### Adding the same peer with two different, yet equivalent, addresses
The current implementation of `addnode` is pretty naive when checking what data is added to `m_added_nodes`. Given the collection stores strings, the checks at `CConnman::AddNode()` basically check wether the exact provided string is already in the collection. If so, the data is rejected, otherwise, it is accepted. However, ips can be formatted in several ways that would bypass those checks.
Two examples would be `127.0.0.1` being equal to `127.1` and `[::1]` being equal to `[0:0:0:0:0:0:0:1]`. Adding any pair of these will be allowed by the rpc command, and both will be reported as connected by `getaddednodeinfo`, given they map to the same `CService`.
This is less severe than the previous issue, since even tough both nodes are reported as connected by `getaddednodeinfo`, there is only a single connection to them (as properly reported by `getpeerinfo`). However, this adds redundant data to `m_added_nodes`, which is undesirable.
### Parametrize `CConnman::GetAddedNodeInfo`
Finally, this PR also parametrizes `CConnman::GetAddedNodeInfo` so it returns either all added nodes info, or only info about the nodes we are **not** connected to. This method is used both for `rpc`, in `getaddednodeinfo`, in which we are reporting all data to the user, so the former applies, and to check what nodes we are not connected to, in `CConnman::ThreadOpenAddedConnections`, in which we are currently returning more data than needed and then actively filtering using `CService.fConnected()`
ACKs for top commit:
jonatack:
re-ACK 0420f99f42
kashifs:
> > tACK [0420f9](0420f99f42)
sr-gi:
> > > tACK [0420f9](0420f99f42)
mzumsande:
Tested ACK 0420f99f42
Tree-SHA512: a3a10e748c12d98d439dfb193c75bc8d9486717cda5f41560f5c0ace1baef523d001d5e7eabac9fa466a9159a30bb925cc1327c2d6c4efb89dcaf54e176d1752
1147e00e59 [validation] change package-fee-too-low, return wtxid(s) and effective feerate (glozow)
10dd9f2441 [test] use CheckPackageMempoolAcceptResult in previous tests (glozow)
3979f1afcb [validation] add TxValidationResult::TX_RECONSIDERABLE, TX_UNKNOWN (glozow)
5c786a026a [refactor] use Wtxid for m_wtxids_fee_calculations (glozow)
Pull request description:
Split off from #26711 (suggested in https://github.com/bitcoin/bitcoin/pull/26711#issuecomment-1786392253). This is part of #27463.
- Add 2 new TxValidationResults
- `TX_RECONSIDERABLE` helps us encode transactions who have failed fee checks that can be bypassed using package validation. This is distinguished from `TX_MEMPOOL_POLICY` so that we re-validate a transaction if and only if it is eligible for package CPFP. In the future, we will have a separate cache for reconsiderable rejects so these transactions don't go in `m_recent_rejects`.
- `TX_UNKNOWN` helps us communicate that we aborted package validation and didn't finish looking at this transaction: it's not valid but it's also not invalid (i.e. don't cache it as a rejected tx)
- Return effective feerate and the wtxids of transactions used to calculate that effective feerate when the error is `TX_SINGLE_FAILURE`. Previously, we would only provide this information if the transaction passed. Now that we have package validation, it's much more helpful to the caller to know how the failing feerate was calculated. This can also be used to improve our submitpackage RPC result (which is currently a bit unhelpful when things fail).
- Use the newly added `CheckPackageMempoolAcceptResult` for existing package validation tests. This increases test coverage and helps test the changes made in this PR.
ACKs for top commit:
instagibbs:
reACK 1147e00e59
achow101:
ACK 1147e00e59
murchandamus:
reACK 1147e00e59
ismaelsadeeq:
ACK 1147e00e59
Tree-SHA512: ac1cd73c2b487a1b99d329875d39d8107c91345a5b0b241d54a6a4de67faf11be69a2721cc732c503024a9cca381dac33d61e187957279e3c82653bea118ba91
c1144f0076 tests: Reset node context members on ~BasicTestingSetup (TheCharlatan)
9759af17ff shutdown: Destroy kernel last (TheCharlatan)
Pull request description:
The destruction/resetting of node context members in the tests should roughly follow the behavior of the `Shutdown` function in `init.cpp`.
This was originally requested by MarcoFalke in this [comment](https://github.com/bitcoin/bitcoin/pull/25065#discussion_r890161249) in response to the [original pull request](https://github.com/bitcoin/bitcoin/pull/25065) introducing the `kernel::Context`.
ACKs for top commit:
maflcko:
ACK c1144f0076 🗣
achow101:
ACK c1144f0076
ryanofsky:
Code review ACK c1144f0076. No code changes since last review, just updated commits and descriptions
Tree-SHA512: 819bb85ff82a5c6c60e429674d5684f3692fe9062500d00a87b361cc59e6bda145be21b5a4466dee6791faed910cbde4d26baab325bf6daa1813af13a63588ff
With subpackage evaluation and de-duplication, it's not always the
entire package that is used in CheckFeerate. To be more helpful to the
caller, specify which transactions were included in the evaluation and
what the feerate was.
Instead of PCKG_POLICY (which is supposed to be for package-wide
errors), use PCKG_TX.
b5a60abe87 MOVEONLY: CleanupTemporaryCoins into its own function (glozow)
10c0a8678c [test util] CreateValidTransaction multi-in/out, configurable feerate, signal BIP125 (glozow)
6ff647a7e0 scripted-diff: rename CheckPackage to IsWellFormedPackage (glozow)
da9aceba21 [refactor] move package checks into helper functions (glozow)
Pull request description:
This is part of #27463. It splits off the more trivial changes from #26711 for ease of review, as requested in https://github.com/bitcoin/bitcoin/pull/26711#issuecomment-1786392253.
- Split package sanitization in policy/packages.h into helper functions
- Add some tests for its quirks (https://github.com/bitcoin/bitcoin/pull/26711#discussion_r1340521597)
- Rename `CheckPackage` to `IsPackageWellFormed`
- Improve the `CreateValidTransaction` unit test utility to:
- Configure the target feerate and return the fee paid
- Signal BIP125 on transactions to enable RBF tests
- Allow the specification of multiple inputs and outputs
- Move `CleanupTemporaryCoins` into its own function to be reused later without duplication
ACKs for top commit:
dergoegge:
Code review ACK b5a60abe87
instagibbs:
ACK b5a60abe87
Tree-SHA512: 39d67a5f0041e381f0d0f802a98ccffbff11e44daa3a49611189d6306b03f18613d5ff16c618898d490c97a216753e99e0db231ff14d327f92c17ae4d269cfec
Support the creation of a transaction with multiple specified inputs or
outputs. Also accept a target feerate and return the fee paid.
Also, signal BIP125 by default - a subsequent commit needs to RBF
something.
Co-authored-by: Andrew Chow <achow101@gmail.com>
