This changes the flag for the bitcoin-chainstate executable. Previously
it was false, now it is the chain's default value (still false for the
main chain).
bf95976061 doc: add note about snapshot chainstate init (James O'Beirne)
e4d7995286 test: add testcases for snapshot initialization (James O'Beirne)
cced4e7336 test: move-only-ish: factor out LoadVerifyActivateChainstate() (James O'Beirne)
51fc9241c0 test: allow on-disk coins and block tree dbs in tests (James O'Beirne)
3c361391b8 test: add reset_chainstate parameter for snapshot unittests (James O'Beirne)
00b357c215 validation: add ResetChainstates() (James O'Beirne)
3a29dfbfb2 move-only: test: make snapshot chainstate setup reusable (James O'Beirne)
8153bd9247 blockmanager: avoid undefined behavior during FlushBlockFile (James O'Beirne)
ad67ff377c validation: remove snapshot datadirs upon validation failure (James O'Beirne)
34d1590331 add utilities for deleting on-disk leveldb data (James O'Beirne)
252abd1e8b init: add utxo snapshot detection (James O'Beirne)
f9f1735f13 validation: rename snapshot chainstate dir (James O'Beirne)
d14bebf100 db: add StoragePath to CDBWrapper/CCoinsViewDB (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11) (parent PR: https://github.com/bitcoin/bitcoin/pull/15606)
---
Half of the replacement for #24232. The original PR grew larger than expected throughout the review process.
This change adds the ability to initialize a snapshot-based chainstate during init if one is detected on disk. This is of course unused as of now (aside from in unittests) given that we haven't yet enabled actually loading snapshots.
Don't be scared! There are some big move-only commits in here.
Accompanying changes include:
- moving the snapshot coinsdb directory from being called `chainstate_[base blockhash]` to `chainstate_snapshot`, since we only support one snapshot in use at a time. This simplifies some logic, but it necessitates writing that base blockhash out to a file within the coinsdb dir. See [discussion here](https://github.com/bitcoin/bitcoin/pull/24232#discussion_r832762880).
- adding a simple fix in `FlushBlockFile()` that avoids a crash when attemping to flush to disk before `LoadBlockIndexDB()` is called, which happens when calling `MaybeRebalanceCaches()` during multiple chainstate init.
- improving the unittest to allow testing with on-disk chainstates - necessary to test a simulated restart and re-initialization.
ACKs for top commit:
naumenkogs:
utACK bf95976061
ariard:
Code Review ACK bf9597606
ryanofsky:
Code review ACK bf95976061. Changes since last review: rebasing, switching from CAutoFile to AutoFile, adding comments, switching from BOOST_CHECK to Assert in test util, using chainman.GetMutex() in tests, destroying one ChainstateManager before creating a new one in tests
fjahr:
utACK bf95976061
aureleoules:
ACK bf95976061
Tree-SHA512: 15ae75caf19f8d12a12d2647c52897904d27b265a7af6b4ae7b858592eeadb8f9da6c2394b6baebec90adc28742c053e3eb506119577dae7c1e722ebb3b7bcc0
b527b54950 net: convert standalone SetSocketNonBlocking() to Sock::SetNonBlocking() (Vasil Dimov)
29f66f7682 moveonly: move SetSocketNonBlocking() from netbase to util/sock (Vasil Dimov)
b4bac55679 net: convert standalone IsSelectableSocket() to Sock::IsSelectable() (Vasil Dimov)
5db7d2ca0a moveonly: move IsSelectableSocket() from compat.h to sock.{h,cpp} (Vasil Dimov)
Pull request description:
_This is a piece of #21878, chopped off to ease review._
* convert standalone `IsSelectableSocket()` to `Sock::IsSelectable()`
* convert standalone `SetSocketNonBlocking()` to `Sock::SetNonBlocking()`
This further encapsulates syscalls inside the `Sock` class and makes the callers mockable.
ACKs for top commit:
jonatack:
ACK b527b54950 review/debug build/unit tests at each commit, cross-referenced the changes with `man select` and `man errno`, ran a signet node on the last commit with ip4/ip6//tor/i2p/cjdns and network connections were nominal
dergoegge:
Code review ACK b527b54950
Tree-SHA512: af783ce558c7a89e173f7ab323fb3517103d765c19b5d14de29f64706b4e1fea3653492e8ea73ae972699986aaddf2ae72c7cfaa7dad7614254283083b7d2632
d575a675cc net_processing: add thread safety annotation for m_highest_fast_announce (Anthony Towns)
0ae7987f68 net_processing: add thread safety annotations for PeerManagerImpl members accessed only via the msgproc thread (Anthony Towns)
a66a7ccb82 net_processing: add thread safety annotations for Peer members accessed only via the msgproc thread (Anthony Towns)
bf12abe454 net: drop cs_sendProcessing (Anthony Towns)
1e78f566d5 net: add NetEventsInterface::g_msgproc_mutex (Anthony Towns)
Pull request description:
There are many cases where we assume message processing is single-threaded in order for how we access node-related memory to be safe. Add an explicit mutex that we can use to document this, which allows the compiler to catch any cases where we try to access that memory from other threads and break that assumption.
ACKs for top commit:
MarcoFalke:
review ACK d575a675cc 📽
dergoegge:
Code review ACK d575a675cc
w0xlt:
ACK d575a675cc
vasild:
ACK d575a675cc modulo the missing runtime checks
Tree-SHA512: b886d1aa4adf318ae64e32ccaf3d508dbb79d6eed3f1fa9d8b2ed96f3c72a3d38cd0f12e05826c9832a2a1302988adfd2b43ea9691aa844f37d8f5c37ff20e05
There are many cases where we assume message processing is
single-threaded in order for how we access node-related memory to be
safe. Add an explicit mutex that we can use to document this, which allows
the compiler to catch any cases where we try to access that memory from
other threads and break that assumption.
in TestingSetup(). This is used in the following commit to test
reinitializing chainstates after snapshot validation and cleanup.
Best reviewed with `git diff --color-moved=dimmed-zebra`.
This CreateAndActivateUTXOSnapshot parameter is necessary once we
perform snapshot completion within ABC, since the existing UpdateTip
test will fail because the IBD chain that has generated the snapshot
will exceed the base of the snapshot.
Being able to test snapshots being loaded into a mostly-uninitialized
datadir allows for more realistic unittest scenarios.
00eeb31c76 scripted-diff: rename CChainState -> Chainstate (James O'Beirne)
Pull request description:
Alright alright alright, I know: we hate refactors. We especially hate cosmetic refactors.
Nobody knows better than I that changing broad swaths of code out from under our already-abused collaborators, only to send a cascade of rebase bankruptcies, is annoying at best and sadistic at worst. And for a rename! The indignation!
But just for a second, imagine yourself. Programming `bitcoin/bitcoin`, on a sandy beach beneath a lapis lazuli sky. You go to type the name of what is probably the most commonly used data structure in the codebase, and you *only hit shift once*.
What could you do in such a world? You could do anything. [The only limit is yourself.](https://zombo.com/)
---
So maybe you like the idea of this patch but really don't want to deal with rebasing. You're in luck!
Here're the commands that will bail you out of rebase bankruptcy:
```sh
git rebase -i $(git merge-base HEAD master) \
-x 'sed -i "s/CChainState/Chainstate/g" $(git ls-files | grep -E ".*\.(py|cpp|h)$") && git commit --amend --no-edit'
# <commit changed?>
git add -u && git rebase --continue
```
---
~~Anyway I'm not sure how serious I am about this, but I figured it was worth proposing.~~ I have decided I am very serious about this.
Maybe we can have nice things every once in a while?
ACKs for top commit:
MarcoFalke:
cr ACK 00eeb31c76
hebasto:
ACK 00eeb31c76
glozow:
ACK 00eeb31c76, thanks for being the one to propose this
w0xlt:
ACK 00eeb31c76
Tree-SHA512: b828a99780614a9b74f7a9c347ce0687de6f8d75232840f5ffc26e02bbb25a3b1f5f9deabbe44f82ada01459586ee8452a3ee2da05d1b3c48558c8df6f49e1b1
377e9ccda4 scripted-diff: net: rename permissionFlags to permission_flags (Anthony Towns)
0a7fc42897 net: make CNode::m_prefer_evict const (Anthony Towns)
d394156b99 net: make CNode::m_permissionFlags const (Anthony Towns)
9dccc3328e net: add CNodeOptions for optional CNode constructor params (Anthony Towns)
Pull request description:
Adds CNodeOptions to make it easier to add optional parameters to the CNode constructor, and makes prefer_evict and m_permissionFlags actually const.
ACKs for top commit:
naumenkogs:
ACK 377e9ccda4
jonatack:
ACK 377e9ccda4 per `git range-diff 52dcb1d 2f3602b 377e9cc`
vasild:
ACK 377e9ccda4
ryanofsky:
Code review ACK 377e9ccda4. Looks good and feel free to ignore suggestions!
Tree-SHA512: 06fd6748770bad75ec8c966fdb73b7534c10bd61838f6f1b36b3f3d6a438e58f6a7d0edb011977e5c118ed7ea85325fac35e10dde520fef249f7a780cf500a85
9580480570 Update debug logging section in the developer notes (Jon Atack)
1abaa31aa3 Update -debug and -debugexclude help docs for severity level logging (Jon Atack)
45f9282162 Create BCLog::Level::Trace log severity level (Jon Atack)
2a8712db4f Unit test coverage for -loglevel configuration option (klementtan)
eb7bee5f84 Create -loglevel configuration option (klementtan)
98a1f9c687 Unit test coverage for log severity levels (klementtan)
9c7507bf76 Create BCLog::Logger::LogLevelsString() helper function (klementtan)
8fe3457dbb Update LogAcceptCategory() and unit tests with log severity levels (klementtan)
c2797cfc60 Add BCLog::Logger::SetLogLevel()/SetCategoryLogLevel() for string inputs (klementtan)
f6c0cc0350 Add BCLog::Logger::m_category_log_levels data member and getter/setter (Jon Atack)
2978b387bf Add BCLog::Logger::m_log_level data member and getter/setter (Jon Atack)
f1379aeca9 Simplify BCLog::Level enum class and LogLevelToStr() function (Jon Atack)
Pull request description:
This is an updated version of https://github.com/bitcoin/bitcoin/pull/25287 and the next steps in parent PR #25203 implementing, with Klement Tan, user-configurable, per-category severity log levels based on an idea by John Newbery and refined in GitHub discussions by Wladimir Van der Laan and Marco Falke.
- simplify the `BCLog::Level` enum class and the `LogLevelToStr()` function and add documentation
- update the logging logic to filter logs by log level both globally and per-category
- add a hidden `-loglevel` help-debug config option to allow testing setting the global or per-category severity level on startup for logging categories enabled with the `-debug` configuration option or the logging RPC (Klement Tan)
- add a `trace` log severity level selectable by the user; the plan is for the current debug messages to become trace, LogPrint ones to become debug, and LogPrintf ones to become info, warning, or error
```
$ ./src/bitcoind -help-debug | grep -A10 loglevel
-loglevel=<level>|<category>:<level>
Set the global or per-category severity level for logging categories
enabled with the -debug configuration option or the logging RPC:
info, debug, trace (default=info); warning and error levels are
always logged. If <category>:<level> is supplied, the setting
will override the global one and may be specified multiple times
to set multiple category-specific levels. <category> can be:
addrman, bench, blockstorage, cmpctblock, coindb, estimatefee,
http, i2p, ipc, leveldb, libevent, lock, mempool, mempoolrej,
net, proxy, prune, qt, rand, reindex, rpc, selectcoins, tor,
util, validation, walletdb, zmq.
```
See the individual commit messages for details.
ACKs for top commit:
jonatack:
One final push per `git range-diff a5d5569 ce3c4c9 9580480` (should be trivial to re-ACK) to ensure this pull changes no default behavior in any way for users or the tests/CI in order to be completely v24 compatible, to update the unit test setup in general, and to update the debug logging section in the developer notes.
klementtan:
reACK 9580480570
1440000bytes:
reACK 9580480570
vasild:
ACK 9580480570
dunxen:
reACK 9580480
brunoerg:
reACK 9580480570
Tree-SHA512: 476a638e0581f40b5d058a9992691722e8b546471ec85e07cbc990798d1197fbffbd02e1b3d081b4978404e07a428378cdc8e159c0004b81f58be7fb01b7cba0
In order to prevent memory DoS, we must ensure that we don't accept a new
header into memory until we've performed anti-DoS checks, such as verifying
that the header is part of a sufficiently high work chain. This commit adds a
new argument to AcceptBlockHeader() so that we can ensure that all call-sites
which might cause a new header to be accepted into memory have to grapple with
the question of whether the header is safe to accept, or needs further
validation.
This patch also fixes two places where low-difficulty-headers could have been
processed without such validation (processing an unrequested block from the
network, and processing a compact block).
Credit to Niklas Gögge for noticing this issue, and thanks to Sjors Provoost
for test code.
for verbose log messages for development or debugging only, as bitcoind may run
more slowly, that are more granular/frequent than the Debug log level, i.e. for
very high-frequency, low-level messages to be logged distinctly from
higher-level, less-frequent debug logging that could still be usable in production.
An example would be to log higher-level peer events (connection, disconnection,
misbehavior, eviction) as Debug, versus Trace for low-level, high-volume p2p
messages in the BCLog::NET category. This will enable the user to log only the
former without the latter, in order to focus on high-level peer management events.
With respect to the name, "trace" is suggested as the most granular level
in resources like the following:
- https://sematext.com/blog/logging-levels
- https://howtodoinjava.com/log4j2/logging-levels
Update the test framework and add test coverage.
- add a -loglevel=<level>|<category:level> config option to allow users
to set a global -loglevel and category-specific log levels. LogPrintLevel
messages with a higher severity level than -loglevel will not be printed
in the debug log.
- for now, this config option is debug-only during the migration to
severity-based logging
- update unit and functional tests
Co-authored-by: "Jon Atack <jon@atack.com>"
a23cca56c0 refactor: Replace BResult with util::Result (Ryan Ofsky)
Pull request description:
Rename `BResult` class to `util::Result` and update the class interface to be more compatible with `std::optional` and with a full-featured result class implemented in https://github.com/bitcoin/bitcoin/pull/25665. Motivation for this change is to update existing `BResult` usages now so they don't have to change later when more features are added in https://github.com/bitcoin/bitcoin/pull/25665.
This change makes the following improvements originally implemented in https://github.com/bitcoin/bitcoin/pull/25665:
- More explicit API. Drops potentially misleading `BResult` constructor that treats any bilingual string argument as an error. Adds `util::Error` constructor so it is never ambiguous when a result is being assigned an error or non-error value.
- Better type compatibility. Supports `util::Result<bilingual_str>` return values to hold translated messages which are not errors.
- More standard and consistent API. `util::Result` supports most of the same operators and methods as `std::optional`. `BResult` had a less familiar interface with `HasRes`/`GetObj`/`ReleaseObj` methods. The Result/Res/Obj naming was also not internally consistent.
- Better code organization. Puts `src/util/` code in the `util::` namespace so naming reflects code organization and it is obvious where the class is coming from. Drops "B" from name because it is undocumented what it stands for (bilingual?)
- Has unit tests.
ACKs for top commit:
MarcoFalke:
ACK a23cca56c0 🏵
jonatack:
ACK a23cca56c0
Tree-SHA512: 2769791e08cd62f21d850aa13fa7afce4fb6875a9cedc39ad5025150dbc611c2ecfd7b3aba8b980a79fde7fbda13babdfa37340633c69b501b6e89727bad5b31
Also:
- Make DEFAULT_MAX_SIG_CACHE_SIZE into constexpr
DEFAULT_MAX_SIG_CACHE_BYTES to utilize the compile-time integer
arithmetic overflow checking available to constexpr.
- Fix comment (MiB instead of MB) for DEFAULT_MAX_SIG_CACHE_BYTES.
- Pass in max_size_bytes parameter to InitS*Cache(), modify log line to
no longer allude to maxsigcachesize being split evenly between the two
validation caches.
- Fix possible integer truncation and add a comment.
[META] I've kept the integer types as int64_t in order to not introduce
unintended behaviour changes, in the next commit we will make
them size_t.
Returning the approximate total size eliminates the need for
InitS*Cache() to do nElems*sizeof(uint256). The cuckoocache has a better
idea of this information.
Rename `BResult` class to `util::Result` and update the class interface to be
more compatible with `std::optional` and with a full-featured result class
implemented in https://github.com/bitcoin/bitcoin/pull/25665. Motivation for
this change is to update existing `BResult` usages now so they don't have to
change later when more features are added in #25665.
This change makes the following improvements originally implemented in #25665:
- More explicit API. Drops potentially misleading `BResult` constructor that
treats any bilingual string argument as an error. Adds `util::Error`
constructor so it is never ambiguous when a result is being assigned an error
or non-error value.
- Better type compatibility. Supports `util::Result<bilingual_str>` return
values to hold translated messages which are not errors.
- More standard and consistent API. `util::Result` supports most of the same
operators and methods as `std::optional`. `BResult` had a less familiar
interface with `HasRes`/`GetObj`/`ReleaseObj` methods. The Result/Res/Obj
naming was also not internally consistent.
- Better code organization. Puts `src/util/` code in the `util::` namespace so
naming reflects code organization and it is obvious where the class is coming
from. Drops "B" from name because it is undocumented what it stands for
(bilingual?)
- Has unit tests.
It is part of the node library. Also, it won't be moved to the kernel
lib, as it will be pruned of ArgsManager.
-BEGIN VERIFY SCRIPT-
# Move module
git mv src/mempool_args.cpp src/node/
git mv src/mempool_args.h src/node/
# Replacements
sed -i 's:mempool_args\.h:node/mempool_args.h:g' $(git grep -l mempool_args)
sed -i 's:mempool_args\.cpp:node/mempool_args.cpp:g' $(git grep -l mempool_args)
sed -i 's:MEMPOOL_ARGS_H:NODE_MEMPOOL_ARGS_H:g' $(git grep -l MEMPOOL_ARGS_H)
-END VERIFY SCRIPT-
facc2fa7b8 Use AutoFile where possible (MacroFake)
6666803c89 streams: Add AutoFile without ser-type and ser-version (MacroFake)
Pull request description:
This was done in the context of https://github.com/bitcoin/bitcoin/pull/25284 , but I think it also makes sense standalone.
The basic idea is that serialization type should not be initialized when it is not needed. Same for the serialization version.
So do this here for `AutoFile`. `CAutoFile` remains in places where it is not yet possible.
ACKs for top commit:
laanwj:
Code review ACK facc2fa7b8
fanquake:
ACK facc2fa7b8
Tree-SHA512: d82d024d55af57565ac53d9d1517afafc12b46964effba0332de62a6c77869356fa77f89e6d4834438fff44c45b64fccdf5a1358bfea03e28dfe55013b3c099d
8d8eeb422e [net processing] Remove CNode::nLocalServices (John Newbery)
5961f8eea1 [net] Return CService from GetLocalAddrForPeer and GetLocalAddress (dergoegge)
d9079fe18d [net processing] Remove CNode::nServices (John Newbery)
7d1c036934 [net processing] Replace fHaveWitness with CanServeWitnesses() (John Newbery)
f65e83d51b [net processing] Remove fClient and m_limited_node (John Newbery)
fc5eb528f7 [tests] Connect peer in outbound_slow_chain_eviction by sending p2p messages (John Newbery)
1f52c47d5c [net processing] Add m_our_services and m_their_services to Peer (John Newbery)
Pull request description:
Another step in #19398. Which services we offer to a peer and which services they offer to us is application layer data and should not be stored on `CNode`.
This is also a prerequisite for adding `PeerManager` unit tests (See #25515).
ACKs for top commit:
MarcoFalke:
ACK 8d8eeb422e🔑
jnewbery:
utACK 8d8eeb422e
mzumsande:
Code Review ACK 8d8eeb422e
Tree-SHA512: e772eb2a0a85db346dd7b453a41011a12756fc7cbfda6a9ef6daa9633b9a47b9770ab3dc02377690f9d02127301c3905ff22905977f758bf90b17a9a35b37523
fa4be8e7c3 move-only: InitializeNode to handshake helper (MacroFake)
fa7098947c move-only: Version handshake to libtest_util (MacroFake)
Pull request description:
The version handshake after setting up a peer is an integral part of (unit) testing net processing logic.
Thus, make the helper accessible in libtest_util.
Also, remove the peerman argument from `FillNode`, as it must be equal to connman's peerman, which can then be used instead.
ACKs for top commit:
dergoegge:
ACK fa4be8e7c3
Tree-SHA512: 8296399dc2c29196bd56584c9b61f1c5a088f96dd3438b07b84e1acf525d867f1e37fdfdeede8a831add25848cda0c221ce3fb873e5ae5ca805a1765aa08eb12
0101d2bc3c [net] Move eviction logic to its own file (dergoegge)
c741d748d4 [net] Move ConnectionType to its own file (Cory Fields)
a3c2707039 [net] Add connection type to NodeEvictionCandidate (dergoegge)
42aa5d5b62 [net] Add NoBan status to NodeEvictionCandidate (dergoegge)
Pull request description:
This PR splits of the first couple commits from #25268 that move the inbound eviction logic from `net.{h,cpp}` to `eviction.{h,cpp}`.
Please look at #25268 for motivation and conceptual review.
ACKs for top commit:
jnewbery:
utACK 0101d2bc3c
theuni:
utACK 0101d2bc3c. I quickly verified with `git --color-moved` that the move-only changes are indeed move-only.
Tree-SHA512: e0c345a698030e049cb22fe281b44503c04403c5be5a3750ca14bfcc603a162ac6bac9a39552472feb57c460102b7ca91430b8ad6268f2efccc49b5e8959331b
d1684beabe fees: Pass in a filepath instead of referencing gArgs (Carl Dong)
9a3d825c30 init: Remove redundant -*mempool*, -limit* queries (Carl Dong)
6c5c60c412 mempool: Use m_limit for UpdateTransactionsFromBlock (Carl Dong)
9e93b10301 node/ifaces: Use existing MemPoolLimits (Carl Dong)
38af2bcf35 mempoolaccept: Use limits from mempool in constructor (Carl Dong)
9333427014 mempool: Introduce (still-unused) MemPoolLimits (Carl Dong)
716bb5fbd3 scripted-diff: Rename anc/desc size limit vars to indicate SI unit (Carl Dong)
1ecc77321d scripted-diff: Rename DEFAULT_MEMPOOL_EXPIRY to indicate time unit (Carl Dong)
aa9141cd81 mempool: Pass in -mempoolexpiry instead of referencing gArgs (Carl Dong)
51c7a41a5e init: Only determine maxmempool once (Carl Dong)
386c9472c8 mempool: Make GetMinFee() with custom size protected (Carl Dong)
82f00de7a6 mempool: Pass in -maxmempool instead of referencing gArgs (Carl Dong)
f1941e8bfd pool: Add and use MemPoolOptions, ApplyArgsManOptions (Carl Dong)
0199bd35bb fuzz/rbf: Add missing TestingSetup (Carl Dong)
ccbaf546a6 scripted-diff: Rename DEFAULT_MAX_MEMPOOL_SIZE to indicate SI unit (Carl Dong)
fc02f77ca6 ArgsMan: Add Get*Arg functions returning optional (Carl Dong)
Pull request description:
This is part of the `libbitcoinkernel` project: #24303, https://github.com/bitcoin/bitcoin/projects/18
-----
As mentioned in the Stage 1 Step 2 description of [the `libbitcoinkernel` project](https://github.com/bitcoin/bitcoin/issues/24303), `ArgsManager` will not be part of `libbitcoinkernel`. Therefore, it is important that we remove any dependence on `ArgsManager` by code that will be part of `libbitcoinkernel`. This is the first in a series of PRs aiming to achieve this.
This PR removes `CTxMemPool+MempoolAccept`'s dependency on `ArgsManager` by introducing a `CTxMemPool::Options` struct, which is used to specify `CTxMemPool`'s various options at construction time.
These options are:
- `-maxmempool` -> `CTxMemPool::Options::max_size`
- `-mempoolexpiry` -> `CTxMemPool::Options::expiry`
- `-limitancestorcount` -> `CTxMemPool::Options::limits::ancestor_count`
- `-limitancestorsize` -> `CTxMemPool::Options::limits::ancestor_size`
- `-limitdescendantcount` -> `CTxMemPool::Options::limits::descendant_count`
- `-limitdescendantsize` -> `CTxMemPool::Options::limits::descendant_size`
More context can be gleaned from the commit messages. The important commits are:
- 56eb479ded8bfb2ef635bb6f3b484f9d5952c70d "pool: Add and use MemPoolOptions, ApplyArgsManOptions"
- a1e08b70f3068f4e8def1c630d8f50cd54da7832 "mempool: Pass in -maxmempool instead of referencing gArgs"
- 6f4bf3ede5812b374828f08fc728ceded2f10024 "mempool: Pass in -mempoolexpiry instead of referencing gArgs"
- 5958a7fe4806599fc620ee8c1a881ca10fa2dd16 "mempool: Introduce (still-unused) MemPoolLimits"
Reviewers: Help needed in the following commits (see commit messages):
- a1e08b70f3068f4e8def1c630d8f50cd54da7832 "mempool: Pass in -maxmempool instead of referencing gArgs"
- 0695081a797e9a5d7787b78b0f8289dafcc6bff7 "node/ifaces: Use existing MemPoolLimits"
Note to Reviewers: There are perhaps an infinite number of ways to architect `CTxMemPool::Options`, the current one tries to keep it simple, usable, and flexible. I hope we don't spend too much time arguing over the design here since that's not the point. In the case that you're 100% certain that a different design is strictly better than this one in every regard, please show us a fully-implemented branch.
-----
TODO:
- [x] Use the more ergonomic `CTxMemPool::Options` where appropriate
- [x] Doxygen comments for `ApplyArgsManOptions`, `MemPoolOptions`
-----
Questions for Reviewers:
1. Should we use `std::chrono::seconds` for `CTxMemPool::Options::expiry` and `CTxMemPool::m_expiry` instead of an `int64_t`? Something else? (`std::chrono::hours`?)
2. Should I merge `CTxMemPool::Limits` inside `CTxMemPool::Options`?
ACKs for top commit:
MarcoFalke:
ACK d1684beabe🍜
ryanofsky:
Code review ACK d1684beabe. Just minor cleanups since last review, mostly switching to brace initialization
Tree-SHA512: 2c138e52d69f61c263f1c3648f01c801338a8f576762c815f478ef5148b8b2f51e91ded5c1be915e678c0b14f6cfba894b82afec58d999d39a7bb7c914736e0b
